yuzu/externals/SDL/include/SDL_hidapi.h

452 lines
17 KiB
C
Raw Normal View History

2021-12-07 05:20:09 +04:00
/*
Simple DirectMedia Layer
Copyright (C) 1997-2021 Sam Lantinga <slouken@libsdl.org>
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
/**
* \file SDL_hidapi.h
*
* Header file for SDL HIDAPI functions.
*
* This is an adaptation of the original HIDAPI interface by Alan Ott,
* and includes source code licensed under the following BSD license:
*
Copyright (c) 2010, Alan Ott, Signal 11 Software
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of Signal 11 Software nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*
* If you would like a version of SDL without this code, you can build SDL
* with SDL_HIDAPI_DISABLED defined to 1. You might want to do this for example
* on iOS or tvOS to avoid a dependency on the CoreBluetooth framework.
*/
#ifndef SDL_hidapi_h_
#define SDL_hidapi_h_
#include "SDL_stdinc.h"
#include "begin_code.h"
/* Set up for C function definitions, even when using C++ */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief A handle representing an open HID device
*/
struct SDL_hid_device_;
typedef struct SDL_hid_device_ SDL_hid_device; /**< opaque hidapi structure */
/** hidapi info structure */
/**
* \brief Information about a connected HID device
*/
typedef struct SDL_hid_device_info
{
/** Platform-specific device path */
char *path;
/** Device Vendor ID */
unsigned short vendor_id;
/** Device Product ID */
unsigned short product_id;
/** Serial Number */
wchar_t *serial_number;
/** Device Release Number in binary-coded decimal,
also known as Device Version Number */
unsigned short release_number;
/** Manufacturer String */
wchar_t *manufacturer_string;
/** Product string */
wchar_t *product_string;
/** Usage Page for this Device/Interface
(Windows/Mac only). */
unsigned short usage_page;
/** Usage for this Device/Interface
(Windows/Mac only).*/
unsigned short usage;
/** The USB interface which this logical device
represents.
* Valid on both Linux implementations in all cases.
* Valid on the Windows implementation only if the device
contains more than one interface. */
int interface_number;
/** Additional information about the USB interface.
Valid on libusb and Android implementations. */
int interface_class;
int interface_subclass;
int interface_protocol;
/** Pointer to the next device */
struct SDL_hid_device_info *next;
} SDL_hid_device_info;
/**
* Initialize the HIDAPI library.
*
* This function initializes the HIDAPI library. Calling it is not strictly
* necessary, as it will be called automatically by SDL_hid_enumerate() and
* any of the SDL_hid_open_*() functions if it is needed. This function should
* be called at the beginning of execution however, if there is a chance of
* HIDAPI handles being opened by different threads simultaneously.
*
* Each call to this function should have a matching call to SDL_hid_exit()
*
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*
* \sa SDL_hid_exit
*/
extern DECLSPEC int SDLCALL SDL_hid_init(void);
/**
* Finalize the HIDAPI library.
*
* This function frees all of the static data associated with HIDAPI. It
* should be called at the end of execution to avoid memory leaks.
*
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*
* \sa SDL_hid_init
*/
extern DECLSPEC int SDLCALL SDL_hid_exit(void);
/**
* Check to see if devices may have been added or removed.
*
* Enumerating the HID devices is an expensive operation, so you can call this
* to see if there have been any system device changes since the last call to
* this function. A change in the counter returned doesn't necessarily mean
* that anything has changed, but you can call SDL_hid_enumerate() to get an
* updated device list.
*
* Calling this function for the first time may cause a thread or other system
* resource to be allocated to track device change notifications.
*
* \returns a change counter that is incremented with each potential device
* change, or 0 if device change detection isn't available.
*
* \since This function is available since SDL 2.0.18.
*
* \sa SDL_hid_enumerate
*/
extern DECLSPEC Uint32 SDLCALL SDL_hid_device_change_count(void);
/**
* Enumerate the HID Devices.
*
* This function returns a linked list of all the HID devices attached to the
* system which match vendor_id and product_id. If `vendor_id` is set to 0
* then any vendor matches. If `product_id` is set to 0 then any product
* matches. If `vendor_id` and `product_id` are both set to 0, then all HID
* devices will be returned.
*
* \param vendor_id The Vendor ID (VID) of the types of device to open.
* \param product_id The Product ID (PID) of the types of device to open.
* \returns a pointer to a linked list of type SDL_hid_device_info, containing
* information about the HID devices attached to the system, or NULL
* in the case of failure. Free this linked list by calling
* SDL_hid_free_enumeration().
*
* \since This function is available since SDL 2.0.18.
*
* \sa SDL_hid_device_change_count
*/
extern DECLSPEC SDL_hid_device_info * SDLCALL SDL_hid_enumerate(unsigned short vendor_id, unsigned short product_id);
/**
* Free an enumeration Linked List
*
* This function frees a linked list created by SDL_hid_enumerate().
*
* \param devs Pointer to a list of struct_device returned from
* SDL_hid_enumerate().
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC void SDLCALL SDL_hid_free_enumeration(SDL_hid_device_info *devs);
/**
* Open a HID device using a Vendor ID (VID), Product ID (PID) and optionally
* a serial number.
*
* If `serial_number` is NULL, the first device with the specified VID and PID
* is opened.
*
* \param vendor_id The Vendor ID (VID) of the device to open.
* \param product_id The Product ID (PID) of the device to open.
* \param serial_number The Serial Number of the device to open (Optionally
* NULL).
* \returns a pointer to a SDL_hid_device object on success or NULL on
* failure.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC SDL_hid_device * SDLCALL SDL_hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number);
/**
* Open a HID device by its path name.
*
* The path name be determined by calling SDL_hid_enumerate(), or a
* platform-specific path name can be used (eg: /dev/hidraw0 on Linux).
*
* \param path The path name of the device to open
* \returns a pointer to a SDL_hid_device object on success or NULL on
* failure.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC SDL_hid_device * SDLCALL SDL_hid_open_path(const char *path, int bExclusive /* = false */);
/**
* Write an Output report to a HID device.
*
* The first byte of `data` must contain the Report ID. For devices which only
* support a single report, this must be set to 0x0. The remaining bytes
* contain the report data. Since the Report ID is mandatory, calls to
* SDL_hid_write() will always contain one more byte than the report contains.
* For example, if a hid report is 16 bytes long, 17 bytes must be passed to
* SDL_hid_write(), the Report ID (or 0x0, for devices with a single report),
* followed by the report data (16 bytes). In this example, the length passed
* in would be 17.
*
* SDL_hid_write() will send the data on the first OUT endpoint, if one
* exists. If it does not, it will send the data through the Control Endpoint
* (Endpoint 0).
*
* \param dev A device handle returned from SDL_hid_open().
* \param data The data to send, including the report number as the first
* byte.
* \param length The length in bytes of the data to send.
* \returns the actual number of bytes written and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_write(SDL_hid_device *dev, const unsigned char *data, size_t length);
/**
* Read an Input report from a HID device with timeout.
*
* Input reports are returned to the host through the INTERRUPT IN endpoint.
* The first byte will contain the Report number if the device uses numbered
* reports.
*
* \param dev A device handle returned from SDL_hid_open().
* \param data A buffer to put the read data into.
* \param length The number of bytes to read. For devices with multiple
* reports, make sure to read an extra byte for the report
* number.
* \param milliseconds timeout in milliseconds or -1 for blocking wait.
* \returns the actual number of bytes read and -1 on error. If no packet was
* available to be read within the timeout period, this function
* returns 0.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_read_timeout(SDL_hid_device *dev, unsigned char *data, size_t length, int milliseconds);
/**
* Read an Input report from a HID device.
*
* Input reports are returned to the host through the INTERRUPT IN endpoint.
* The first byte will contain the Report number if the device uses numbered
* reports.
*
* \param dev A device handle returned from SDL_hid_open().
* \param data A buffer to put the read data into.
* \param length The number of bytes to read. For devices with multiple
* reports, make sure to read an extra byte for the report
* number.
* \returns the actual number of bytes read and -1 on error. If no packet was
* available to be read and the handle is in non-blocking mode, this
* function returns 0.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_read(SDL_hid_device *dev, unsigned char *data, size_t length);
/**
* Set the device handle to be non-blocking.
*
* In non-blocking mode calls to SDL_hid_read() will return immediately with a
* value of 0 if there is no data to be read. In blocking mode, SDL_hid_read()
* will wait (block) until there is data to read before returning.
*
* Nonblocking can be turned on and off at any time.
*
* \param dev A device handle returned from SDL_hid_open().
* \param nonblock enable or not the nonblocking reads - 1 to enable
* nonblocking - 0 to disable nonblocking.
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_set_nonblocking(SDL_hid_device *dev, int nonblock);
/**
* Send a Feature report to the device.
*
* Feature reports are sent over the Control endpoint as a Set_Report
* transfer. The first byte of `data` must contain the Report ID. For devices
* which only support a single report, this must be set to 0x0. The remaining
* bytes contain the report data. Since the Report ID is mandatory, calls to
* SDL_hid_send_feature_report() will always contain one more byte than the
* report contains. For example, if a hid report is 16 bytes long, 17 bytes
* must be passed to SDL_hid_send_feature_report(): the Report ID (or 0x0, for
* devices which do not use numbered reports), followed by the report data (16
* bytes). In this example, the length passed in would be 17.
*
* \param dev A device handle returned from SDL_hid_open().
* \param data The data to send, including the report number as the first
* byte.
* \param length The length in bytes of the data to send, including the report
* number.
* \returns the actual number of bytes written and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_send_feature_report(SDL_hid_device *dev, const unsigned char *data, size_t length);
/**
* Get a feature report from a HID device.
*
* Set the first byte of `data` to the Report ID of the report to be read.
* Make sure to allow space for this extra byte in `data`. Upon return, the
* first byte will still contain the Report ID, and the report data will start
* in data[1].
*
* \param dev A device handle returned from SDL_hid_open().
* \param data A buffer to put the read data into, including the Report ID.
* Set the first byte of `data` to the Report ID of the report to
* be read, or set it to zero if your device does not use numbered
* reports.
* \param length The number of bytes to read, including an extra byte for the
* report ID. The buffer can be longer than the actual report.
* \returns the number of bytes read plus one for the report ID (which is
* still in the first byte), or -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_get_feature_report(SDL_hid_device *dev, unsigned char *data, size_t length);
/**
* Close a HID device.
*
* \param dev A device handle returned from SDL_hid_open().
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC void SDLCALL SDL_hid_close(SDL_hid_device *dev);
/**
* Get The Manufacturer String from a HID device.
*
* \param dev A device handle returned from SDL_hid_open().
* \param string A wide string buffer to put the data into.
* \param maxlen The length of the buffer in multiples of wchar_t.
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_get_manufacturer_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
/**
* Get The Product String from a HID device.
*
* \param dev A device handle returned from SDL_hid_open().
* \param string A wide string buffer to put the data into.
* \param maxlen The length of the buffer in multiples of wchar_t.
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_get_product_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
/**
* Get The Serial Number String from a HID device.
*
* \param dev A device handle returned from SDL_hid_open().
* \param string A wide string buffer to put the data into.
* \param maxlen The length of the buffer in multiples of wchar_t.
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_get_serial_number_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
/**
* Get a string from a HID device, based on its string index.
*
* \param dev A device handle returned from SDL_hid_open().
* \param string_index The index of the string to get.
* \param string A wide string buffer to put the data into.
* \param maxlen The length of the buffer in multiples of wchar_t.
* \returns 0 on success and -1 on error.
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC int SDLCALL SDL_hid_get_indexed_string(SDL_hid_device *dev, int string_index, wchar_t *string, size_t maxlen);
/**
* Start or stop a BLE scan on iOS and tvOS to pair Steam Controllers
*
* \param active SDL_TRUE to start the scan, SDL_FALSE to stop the scan
*
* \since This function is available since SDL 2.0.18.
*/
extern DECLSPEC void SDLCALL SDL_hid_ble_scan(SDL_bool active);
/* Ends C function definitions when using C++ */
#ifdef __cplusplus
}
#endif
#include "close_code.h"
#endif /* SDL_hidapi_h_ */
/* vi: set sts=4 ts=4 sw=4 expandtab: */