early-access version 2183

README.md

@@ -1,7 +1,7 @@
 yuzu emulator early access
 =============
 
-This is the source code for early-access 2182.
+This is the source code for early-access 2183.
 
 ## Legal Notice
 

src/common/input.h

@@ -15,6 +15,7 @@
 
 namespace Common::Input {
 
+// Type of data that is expected to recieve or send
 enum class InputType {
     None,
     Battery,
@@ -30,6 +31,7 @@ enum class InputType {
     Ir,
 };
 
+// Internal battery charge level
 enum class BatteryLevel : u32 {
     None,
     Empty,
@@ -41,13 +43,17 @@ enum class BatteryLevel : u32 {
 };
 
 enum class PollingMode {
+    // Constant polling of buttons, analogs and motion data
     Active,
+    // Only update on button change, digital analogs
     Pasive,
-    Camera,
+    // Enable near field communication polling
-    NCF,
+    NFC,
+    // Enable infrared camera polling
     IR,
 };
 
+// Vibration reply from the controller
 enum class VibrationError {
     None,
     NotSupported,
@@ -55,6 +61,7 @@ enum class VibrationError {
     Unknown,
 };
 
+// Polling mode reply from the controller
 enum class PollingError {
     None,
     NotSupported,
@@ -67,20 +74,28 @@ enum class VibrationAmplificationType {
     Exponential,
 };
 
+// Analog properties for calibration
 struct AnalogProperties {
+    // Anything below this value will be detected as zero
     float deadzone{};
+    // Anyting above this values will be detected as one
     float range{1.0f};
+    // Minimum value to be detected as active
     float threshold{0.5f};
+    // Drift correction applied to the raw data
     float offset{};
+    // Invert direction of the sensor data
     bool inverted{};
 };
 
+// Single analog sensor data
 struct AnalogStatus {
     float value{};
     float raw_value{};
     AnalogProperties properties{};
 };
 
+// Button data
 struct ButtonStatus {
     Common::UUID uuid{};
     bool value{};
@@ -89,8 +104,10 @@ struct ButtonStatus {
     bool locked{};
 };
 
+// Internal battery data
 using BatteryStatus = BatteryLevel;
 
+// Analog and digital joystick data
 struct StickStatus {
     Common::UUID uuid{};
     AnalogStatus x{};
@@ -101,18 +118,21 @@ struct StickStatus {
     bool down{};
 };
 
+// Analog and digital trigger data
 struct TriggerStatus {
     Common::UUID uuid{};
     AnalogStatus analog{};
     ButtonStatus pressed{};
 };
 
+// 3D vector representing motion input
 struct MotionSensor {
     AnalogStatus x{};
     AnalogStatus y{};
     AnalogStatus z{};
 };
 
+// Motion data used to calculate controller orientation
 struct MotionStatus {
     // Gyroscope vector measurement in radians/s.
     MotionSensor gyro{};
@@ -124,6 +144,7 @@ struct MotionStatus {
     bool force_update{};
 };
 
+// Data of a single point on a touch screen
 struct TouchStatus {
     ButtonStatus pressed{};
     AnalogStatus x{};
@@ -131,11 +152,13 @@ struct TouchStatus {
     int id{};
 };
 
+// Physical controller color in RGB format
 struct BodyColorStatus {
     u32 body{};
     u32 buttons{};
 };
 
+// HD rumble data
 struct VibrationStatus {
     f32 low_amplitude{};
     f32 low_frequency{};
@@ -144,6 +167,7 @@ struct VibrationStatus {
     VibrationAmplificationType type;
 };
 
+// Physical controller LED pattern
 struct LedStatus {
     bool led_1{};
     bool led_2{};
@@ -151,6 +175,7 @@ struct LedStatus {
     bool led_4{};
 };
 
+// Callback data consisting of an input type and the equivalent data status
 struct CallbackStatus {
     InputType type{InputType::None};
     ButtonStatus button_status{};
@@ -164,6 +189,7 @@ struct CallbackStatus {
     VibrationStatus vibration_status{};
 };
 
+// Triggered once every input change
 struct InputCallback {
     std::function<void(CallbackStatus)> on_change;
 };
@@ -178,15 +204,17 @@ public:
         return;
     }
 
-    // Force input device to update data regarless of the current state
+    // Force input device to update data regardless of the current state
     virtual void ForceUpdate() {
         return;
     }
 
+    // Sets the function to be triggered when input changes
     void SetCallback(InputCallback callback_) {
         callback = std::move(callback_);
     }
 
+    // Triggers the function set in the callback
     void TriggerOnChange(CallbackStatus status) {
         if (callback.on_change) {
             callback.on_change(status);

src/common/settings.h

@@ -559,8 +559,6 @@ struct Values {
     Setting<bool> enable_accurate_vibrations{false, "enable_accurate_vibrations"};
 
     Setting<bool> motion_enabled{true, "motion_enabled"};
-    BasicSetting<std::string> motion_device{"engine:motion_emu,update_period:100,sensitivity:0.01",
-                                            "motion_device"};
     BasicSetting<std::string> udp_input_servers{"127.0.0.1:26760", "udp_input_servers"};
 
     BasicSetting<bool> pause_tas_on_load{true, "pause_tas_on_load"};
@@ -583,7 +581,6 @@ struct Values {
 
     TouchscreenInput touchscreen;
 
-    BasicSetting<bool> use_touch_from_button{false, "use_touch_from_button"};
     BasicSetting<std::string> touch_device{"min_x:100,min_y:50,max_x:1800,max_y:850",
                                            "touch_device"};
     BasicSetting<int> touch_from_button_map_index{0, "touch_from_button_map"};

src/core/hid/emulated_console.cpp

@@ -11,7 +11,7 @@ EmulatedConsole::EmulatedConsole() = default;
 EmulatedConsole::~EmulatedConsole() = default;
 
 void EmulatedConsole::ReloadFromSettings() {
-    // Using first motion device from player 1. No need to assign a special config at the moment
+    // Using first motion device from player 1. No need to assign any unique config at the moment
     const auto& player = Settings::values.players.GetValue()[0];
     motion_params = Common::ParamPackage(player.motions[0]);
 
@@ -33,6 +33,7 @@ void EmulatedConsole::SetTouchParams() {
         static_cast<u64>(Settings::values.touch_from_button_map_index.GetValue());
     const auto& touch_buttons = Settings::values.touch_from_button_maps[button_index].buttons;
 
+    // Map the rest of the fingers from touch from button configuration
     for (const auto& config_entry : touch_buttons) {
         Common::ParamPackage params{config_entry};
         Common::ParamPackage touch_button_params;
@@ -54,7 +55,9 @@ void EmulatedConsole::SetTouchParams() {
 }
 
 void EmulatedConsole::ReloadInput() {
+    // If you load any device here add the equivalent to the UnloadInput() function
     SetTouchParams();
+
     motion_devices = Common::Input::CreateDevice<Common::Input::InputDevice>(motion_params);
     if (motion_devices) {
         Common::Input::InputCallback motion_callback{
@@ -62,6 +65,7 @@ void EmulatedConsole::ReloadInput() {
         motion_devices->SetCallback(motion_callback);
     }
 
+    // Unique index for identifying touch device source
     std::size_t index = 0;
     for (auto& touch_device : touch_devices) {
         touch_device = Common::Input::CreateDevice<Common::Input::InputDevice>(touch_params[index]);

src/core/hle/service/acc/acc.cpp

@@ -826,6 +826,13 @@ void Module::Interface::IsUserAccountSwitchLocked(Kernel::HLERequestContext& ctx
     rb.Push(is_locked);
 }
 
+void Module::Interface::Unknown160(Kernel::HLERequestContext& ctx) {
+    LOG_WARNING(Service_ACC, "(STUBBED) called");
+
+    IPC::ResponseBuilder rb{ctx, 2};
+    rb.Push(ResultSuccess);
+}
+
 void Module::Interface::GetProfileEditor(Kernel::HLERequestContext& ctx) {
     IPC::RequestParser rp{ctx};
     Common::UUID user_id = rp.PopRaw<Common::UUID>();

src/core/hle/service/acc/acc.h

@@ -33,6 +33,7 @@ public:
         void IsUserRegistrationRequestPermitted(Kernel::HLERequestContext& ctx);
         void TrySelectUserWithoutInteraction(Kernel::HLERequestContext& ctx);
         void IsUserAccountSwitchLocked(Kernel::HLERequestContext& ctx);
+        void Unknown160(Kernel::HLERequestContext& ctx);
         void GetProfileEditor(Kernel::HLERequestContext& ctx);
         void ListQualifiedUsers(Kernel::HLERequestContext& ctx);
         void LoadOpenContext(Kernel::HLERequestContext& ctx);

src/core/hle/service/acc/acc_u0.cpp

@@ -34,6 +34,7 @@ ACC_U0::ACC_U0(std::shared_ptr<Module> module_, std::shared_ptr<ProfileManager>
         {140, &ACC_U0::InitializeApplicationInfoRestricted, "InitializeApplicationInfoRestricted"}, // 6.0.0+
         {141, &ACC_U0::ListQualifiedUsers, "ListQualifiedUsers"}, // 6.0.0+
         {150, &ACC_U0::IsUserAccountSwitchLocked, "IsUserAccountSwitchLocked"}, // 6.0.0+
+        {160, &ACC_U0::Unknown160, "Unknown160"},
     };
     // clang-format on
 

src/input_common/input_poller.cpp

@@ -606,6 +606,8 @@ public:
             .raw_value = input_engine->GetAxis(identifier, axis_z),
             .properties = properties_z,
         };
+        status.delta_timestamp = 5000;
+        status.force_update = true;
         return status;
     }
 

src/shader_recompiler/backend/spirv/emit_spirv_context_get_set.cpp

@@ -328,7 +328,6 @@ Id EmitGetAttribute(EmitContext& ctx, IR::Attribute attr, Id vertex) {
     }
     if (IsLegacyAttribute(attr)) {
         if (attr == IR::Attribute::FogCoordinate) {
-            LOG_WARNING(Shader_SPIRV, "Get FogCoordinate Attribute called");
             const Id attr_ptr{AttrPointer(ctx, ctx.input_f32, vertex,
                                           ctx.InputLegacyAttribute(attr), ctx.Const(0u))};
             return ctx.OpLoad(ctx.F32[1], attr_ptr);

src/yuzu/configuration/config.cpp

@@ -623,9 +623,7 @@ void Config::ReadMotionTouchValues() {
     }
     qt_config->endArray();
 
-    ReadBasicSetting(Settings::values.motion_device);
     ReadBasicSetting(Settings::values.touch_device);
-    ReadBasicSetting(Settings::values.use_touch_from_button);
     ReadBasicSetting(Settings::values.touch_from_button_map_index);
     Settings::values.touch_from_button_map_index = std::clamp(
         Settings::values.touch_from_button_map_index.GetValue(), 0, num_touch_from_button_maps - 1);
@@ -1131,9 +1129,7 @@ void Config::SaveTouchscreenValues() {
 }
 
 void Config::SaveMotionTouchValues() {
-    WriteBasicSetting(Settings::values.motion_device);
     WriteBasicSetting(Settings::values.touch_device);
-    WriteBasicSetting(Settings::values.use_touch_from_button);
     WriteBasicSetting(Settings::values.touch_from_button_map_index);
     WriteBasicSetting(Settings::values.udp_input_servers);
 

src/yuzu/configuration/configure_motion_touch.cpp

@@ -93,6 +93,7 @@ ConfigureMotionTouch::ConfigureMotionTouch(QWidget* parent,
            "using-a-controller-or-android-phone-for-motion-or-touch-input'><span "
            "style=\"text-decoration: underline; color:#039be5;\">Learn More</span></a>"));
 
+    setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint);
     SetConfiguration();
     UpdateUiDisplay();
     ConnectEvents();
@@ -101,17 +102,14 @@ ConfigureMotionTouch::ConfigureMotionTouch(QWidget* parent,
 ConfigureMotionTouch::~ConfigureMotionTouch() = default;
 
 void ConfigureMotionTouch::SetConfiguration() {
-    const Common::ParamPackage motion_param(Settings::values.motion_device.GetValue());
     const Common::ParamPackage touch_param(Settings::values.touch_device.GetValue());
 
-    ui->touch_from_button_checkbox->setChecked(Settings::values.use_touch_from_button.GetValue());
     touch_from_button_maps = Settings::values.touch_from_button_maps;
     for (const auto& touch_map : touch_from_button_maps) {
         ui->touch_from_button_map->addItem(QString::fromStdString(touch_map.name));
     }
     ui->touch_from_button_map->setCurrentIndex(
         Settings::values.touch_from_button_map_index.GetValue());
-    ui->motion_sensitivity->setValue(motion_param.Get("sensitivity", 0.01f));
 
     min_x = touch_param.Get("min_x", 100);
     min_y = touch_param.Get("min_y", 50);
@@ -139,9 +137,6 @@ void ConfigureMotionTouch::SetConfiguration() {
 void ConfigureMotionTouch::UpdateUiDisplay() {
     const QString cemuhook_udp = QStringLiteral("cemuhookudp");
 
-    ui->motion_sensitivity_label->setVisible(true);
-    ui->motion_sensitivity->setVisible(true);
-
     ui->touch_calibration->setVisible(true);
     ui->touch_calibration_config->setVisible(true);
     ui->touch_calibration_label->setVisible(true);
@@ -312,7 +307,6 @@ void ConfigureMotionTouch::ApplyConfiguration() {
     touch_param.Set("max_y", max_y);
 
     Settings::values.touch_device = touch_param.Serialize();
-    Settings::values.use_touch_from_button = ui->touch_from_button_checkbox->isChecked();
     Settings::values.touch_from_button_map_index = ui->touch_from_button_map->currentIndex();
     Settings::values.touch_from_button_maps = touch_from_button_maps;
     Settings::values.udp_input_servers = GetUDPServerString();

src/yuzu/configuration/configure_motion_touch.ui

@@ -2,14 +2,6 @@
 <ui version="4.0">
  <class>ConfigureMotionTouch</class>
  <widget class="QDialog" name="ConfigureMotionTouch">
-  <property name="geometry">
-   <rect>
-    <x>0</x>
-    <y>0</y>
-    <width>500</width>
-    <height>482</height>
-   </rect>
-  </property>
   <property name="windowTitle">
    <string>Configure Motion / Touch</string>
   </property>
@@ -17,48 +9,6 @@
    <string notr="true"/>
   </property>
   <layout class="QVBoxLayout">
-   <item>
-    <widget class="QGroupBox" name="motion_group_box">
-     <property name="title">
-      <string>Mouse Motion</string>
-     </property>
-     <layout class="QVBoxLayout">
-      <item>
-       <layout class="QHBoxLayout">
-        <item>
-         <widget class="QLabel" name="motion_sensitivity_label">
-          <property name="text">
-           <string>Sensitivity:</string>
-          </property>
-         </widget>
-        </item>
-        <item>
-         <widget class="QDoubleSpinBox" name="motion_sensitivity">
-          <property name="alignment">
-           <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
-          </property>
-          <property name="decimals">
-           <number>4</number>
-          </property>
-          <property name="minimum">
-           <double>0.010000000000000</double>
-          </property>
-          <property name="maximum">
-           <double>10.000000000000000</double>
-          </property>
-          <property name="singleStep">
-           <double>0.001000000000000</double>
-          </property>
-          <property name="value">
-           <double>0.010000000000000</double>
-          </property>
-         </widget>
-        </item>
-       </layout>
-      </item>
-     </layout>
-    </widget>
-   </item>
    <item>
     <widget class="QGroupBox" name="touch_group_box">
      <property name="title">
@@ -102,15 +52,9 @@
       <item>
        <layout class="QHBoxLayout">
          <item>
-         <widget class="QCheckBox" name="touch_from_button_checkbox">
+           <widget class="QLabel" name="touch_from_button_label">
-          <property name="sizePolicy">
-           <sizepolicy hsizetype="Maximum" vsizetype="Fixed">
-            <horstretch>0</horstretch>
-            <verstretch>0</verstretch>
-           </sizepolicy>
-          </property>
              <property name="text">
-           <string>Use button mapping:</string>
+               <string>Touch from button profile:</string>
              </property>
            </widget>
          </item>

src/yuzu_cmd/config.cpp

@@ -292,8 +292,6 @@ void Config::ReadValues() {
             Settings::values.mouse_buttons[i] = default_param;
     }
 
-    ReadSetting("ControlsGeneral", Settings::values.motion_device);
-
     ReadSetting("ControlsGeneral", Settings::values.touch_device);
 
     ReadSetting("ControlsGeneral", Settings::values.keyboard_enabled);
@@ -362,7 +360,6 @@ void Config::ReadValues() {
             Settings::TouchFromButtonMap{"default", {}});
         num_touch_from_button_maps = 1;
     }
-    ReadSetting("ControlsGeneral", Settings::values.use_touch_from_button);
     Settings::values.touch_from_button_map_index = std::clamp(
         Settings::values.touch_from_button_map_index.GetValue(), 0, num_touch_from_button_maps - 1);
 

src/yuzu_cmd/default_ini.h

@@ -84,23 +84,10 @@ enable_accurate_vibrations=
 # 0: Disabled, 1 (default): Enabled
 motion_enabled =
 
-# for motion input, the following devices are available:
+# Defines the udp device's touch screen coordinate system for cemuhookudp devices
-#  - "motion_emu" (default) for emulating motion input from mouse input. Required parameters:
+#  - "min_x", "min_y", "max_x", "max_y"
-#      - "update_period": update period in milliseconds (default to 100)
-#      - "sensitivity": the coefficient converting mouse movement to tilting angle (default to 0.01)
-#  - "cemuhookudp" reads motion input from a udp server that uses cemuhook's udp protocol
-motion_device=
-
-# for touch input, the following devices are available:
-#  - "emu_window" (default) for emulating touch input from mouse input to the emulation window. No parameters required
-#  - "cemuhookudp" reads touch input from a udp server that uses cemuhook's udp protocol
-#      - "min_x", "min_y", "max_x", "max_y": defines the udp device's touch screen coordinate system
 touch_device=
 
-# Whether to enable or disable touch input from button
-# 0 (default): Disabled, 1: Enabled
-use_touch_from_button=
-
 # for mapping buttons to touch inputs.
 #touch_from_button_map=1
 #touch_from_button_maps_0_name=default