early-access version 1611

externals/SDL/src/thread/SDL_systhread.h

@@ -0,0 +1,70 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../SDL_internal.h"
+
+/* These are functions that need to be implemented by a port of SDL */
+
+#ifndef SDL_systhread_h_
+#define SDL_systhread_h_
+
+#include "SDL_thread.h"
+#include "SDL_thread_c.h"
+
+/* This function creates a thread, passing args to SDL_RunThread(),
+   saves a system-dependent thread id in thread->id, and returns 0
+   on success.
+*/
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+extern int SDL_SYS_CreateThread(SDL_Thread * thread, void *args,
+                                pfnSDL_CurrentBeginThread pfnBeginThread,
+                                pfnSDL_CurrentEndThread pfnEndThread);
+#else
+extern int SDL_SYS_CreateThread(SDL_Thread * thread, void *args);
+#endif
+
+/* This function does any necessary setup in the child thread */
+extern void SDL_SYS_SetupThread(const char *name);
+
+/* This function sets the current thread priority */
+extern int SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority);
+
+/* This function waits for the thread to finish and frees any data
+   allocated by SDL_SYS_CreateThread()
+ */
+extern void SDL_SYS_WaitThread(SDL_Thread * thread);
+
+/* Mark thread as cleaned up as soon as it exits, without joining. */
+extern void SDL_SYS_DetachThread(SDL_Thread * thread);
+
+/* Get the thread local storage for this thread */
+extern SDL_TLSData *SDL_SYS_GetTLSData(void);
+
+/* Set the thread local storage for this thread */
+extern int SDL_SYS_SetTLSData(SDL_TLSData *data);
+
+/* This is for internal SDL use, so we don't need #ifdefs everywhere. */
+extern SDL_Thread *
+SDL_CreateThreadInternal(int (SDLCALL * fn) (void *), const char *name,
+                         const size_t stacksize, void *data);
+
+#endif /* SDL_systhread_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/SDL_thread.c

@@ -0,0 +1,511 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../SDL_internal.h"
+
+/* System independent thread management routines for SDL */
+
+#include "SDL_assert.h"
+#include "SDL_thread.h"
+#include "SDL_thread_c.h"
+#include "SDL_systhread.h"
+#include "SDL_hints.h"
+#include "../SDL_error_c.h"
+
+
+SDL_TLSID
+SDL_TLSCreate()
+{
+    static SDL_atomic_t SDL_tls_id;
+    return SDL_AtomicIncRef(&SDL_tls_id)+1;
+}
+
+void *
+SDL_TLSGet(SDL_TLSID id)
+{
+    SDL_TLSData *storage;
+
+    storage = SDL_SYS_GetTLSData();
+    if (!storage || id == 0 || id > storage->limit) {
+        return NULL;
+    }
+    return storage->array[id-1].data;
+}
+
+int
+SDL_TLSSet(SDL_TLSID id, const void *value, void (SDLCALL *destructor)(void *))
+{
+    SDL_TLSData *storage;
+
+    if (id == 0) {
+        return SDL_InvalidParamError("id");
+    }
+
+    storage = SDL_SYS_GetTLSData();
+    if (!storage || (id > storage->limit)) {
+        unsigned int i, oldlimit, newlimit;
+
+        oldlimit = storage ? storage->limit : 0;
+        newlimit = (id + TLS_ALLOC_CHUNKSIZE);
+        storage = (SDL_TLSData *)SDL_realloc(storage, sizeof(*storage)+(newlimit-1)*sizeof(storage->array[0]));
+        if (!storage) {
+            return SDL_OutOfMemory();
+        }
+        storage->limit = newlimit;
+        for (i = oldlimit; i < newlimit; ++i) {
+            storage->array[i].data = NULL;
+            storage->array[i].destructor = NULL;
+        }
+        if (SDL_SYS_SetTLSData(storage) != 0) {
+            return -1;
+        }
+    }
+
+    storage->array[id-1].data = SDL_const_cast(void*, value);
+    storage->array[id-1].destructor = destructor;
+    return 0;
+}
+
+static void
+SDL_TLSCleanup()
+{
+    SDL_TLSData *storage;
+
+    storage = SDL_SYS_GetTLSData();
+    if (storage) {
+        unsigned int i;
+        for (i = 0; i < storage->limit; ++i) {
+            if (storage->array[i].destructor) {
+                storage->array[i].destructor(storage->array[i].data);
+            }
+        }
+        SDL_SYS_SetTLSData(NULL);
+        SDL_free(storage);
+    }
+}
+
+
+/* This is a generic implementation of thread-local storage which doesn't
+   require additional OS support.
+
+   It is not especially efficient and doesn't clean up thread-local storage
+   as threads exit.  If there is a real OS that doesn't support thread-local
+   storage this implementation should be improved to be production quality.
+*/
+
+typedef struct SDL_TLSEntry {
+    SDL_threadID thread;
+    SDL_TLSData *storage;
+    struct SDL_TLSEntry *next;
+} SDL_TLSEntry;
+
+static SDL_mutex *SDL_generic_TLS_mutex;
+static SDL_TLSEntry *SDL_generic_TLS;
+
+
+SDL_TLSData *
+SDL_Generic_GetTLSData(void)
+{
+    SDL_threadID thread = SDL_ThreadID();
+    SDL_TLSEntry *entry;
+    SDL_TLSData *storage = NULL;
+
+#if !SDL_THREADS_DISABLED
+    if (!SDL_generic_TLS_mutex) {
+        static SDL_SpinLock tls_lock;
+        SDL_AtomicLock(&tls_lock);
+        if (!SDL_generic_TLS_mutex) {
+            SDL_mutex *mutex = SDL_CreateMutex();
+            SDL_MemoryBarrierRelease();
+            SDL_generic_TLS_mutex = mutex;
+            if (!SDL_generic_TLS_mutex) {
+                SDL_AtomicUnlock(&tls_lock);
+                return NULL;
+            }
+        }
+        SDL_AtomicUnlock(&tls_lock);
+    }
+#endif /* SDL_THREADS_DISABLED */
+
+    SDL_MemoryBarrierAcquire();
+    SDL_LockMutex(SDL_generic_TLS_mutex);
+    for (entry = SDL_generic_TLS; entry; entry = entry->next) {
+        if (entry->thread == thread) {
+            storage = entry->storage;
+            break;
+        }
+    }
+#if !SDL_THREADS_DISABLED
+    SDL_UnlockMutex(SDL_generic_TLS_mutex);
+#endif
+
+    return storage;
+}
+
+int
+SDL_Generic_SetTLSData(SDL_TLSData *storage)
+{
+    SDL_threadID thread = SDL_ThreadID();
+    SDL_TLSEntry *prev, *entry;
+
+    /* SDL_Generic_GetTLSData() is always called first, so we can assume SDL_generic_TLS_mutex */
+    SDL_LockMutex(SDL_generic_TLS_mutex);
+    prev = NULL;
+    for (entry = SDL_generic_TLS; entry; entry = entry->next) {
+        if (entry->thread == thread) {
+            if (storage) {
+                entry->storage = storage;
+            } else {
+                if (prev) {
+                    prev->next = entry->next;
+                } else {
+                    SDL_generic_TLS = entry->next;
+                }
+                SDL_free(entry);
+            }
+            break;
+        }
+        prev = entry;
+    }
+    if (!entry) {
+        entry = (SDL_TLSEntry *)SDL_malloc(sizeof(*entry));
+        if (entry) {
+            entry->thread = thread;
+            entry->storage = storage;
+            entry->next = SDL_generic_TLS;
+            SDL_generic_TLS = entry;
+        }
+    }
+    SDL_UnlockMutex(SDL_generic_TLS_mutex);
+
+    if (!entry) {
+        return SDL_OutOfMemory();
+    }
+    return 0;
+}
+
+/* Routine to get the thread-specific error variable */
+SDL_error *
+SDL_GetErrBuf(void)
+{
+#if SDL_THREADS_DISABLED
+    /* Non-thread-safe global error variable */
+    static SDL_error SDL_global_error;
+    return &SDL_global_error;
+#else
+    static SDL_SpinLock tls_lock;
+    static SDL_bool tls_being_created;
+    static SDL_TLSID tls_errbuf;
+    static SDL_error SDL_global_errbuf;
+    const SDL_error *ALLOCATION_IN_PROGRESS = (SDL_error *)-1;
+    SDL_error *errbuf;
+
+    /* tls_being_created is there simply to prevent recursion if SDL_TLSCreate() fails.
+       It also means it's possible for another thread to also use SDL_global_errbuf,
+       but that's very unlikely and hopefully won't cause issues.
+     */
+    if (!tls_errbuf && !tls_being_created) {
+        SDL_AtomicLock(&tls_lock);
+        if (!tls_errbuf) {
+            SDL_TLSID slot;
+            tls_being_created = SDL_TRUE;
+            slot = SDL_TLSCreate();
+            tls_being_created = SDL_FALSE;
+            SDL_MemoryBarrierRelease();
+            tls_errbuf = slot;
+        }
+        SDL_AtomicUnlock(&tls_lock);
+    }
+    if (!tls_errbuf) {
+        return &SDL_global_errbuf;
+    }
+
+    SDL_MemoryBarrierAcquire();
+    errbuf = (SDL_error *)SDL_TLSGet(tls_errbuf);
+    if (errbuf == ALLOCATION_IN_PROGRESS) {
+        return &SDL_global_errbuf;
+    }
+    if (!errbuf) {
+        /* Mark that we're in the middle of allocating our buffer */
+        SDL_TLSSet(tls_errbuf, ALLOCATION_IN_PROGRESS, NULL);
+        errbuf = (SDL_error *)SDL_malloc(sizeof(*errbuf));
+        if (!errbuf) {
+            SDL_TLSSet(tls_errbuf, NULL, NULL);
+            return &SDL_global_errbuf;
+        }
+        SDL_zerop(errbuf);
+        SDL_TLSSet(tls_errbuf, errbuf, SDL_free);
+    }
+    return errbuf;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+
+/* Arguments and callback to setup and run the user thread function */
+typedef struct
+{
+    int (SDLCALL * func) (void *);
+    void *data;
+    SDL_Thread *info;
+    SDL_sem *wait;
+} thread_args;
+
+void
+SDL_RunThread(void *data)
+{
+    thread_args *args = (thread_args *) data;
+    int (SDLCALL * userfunc) (void *) = args->func;
+    void *userdata = args->data;
+    SDL_Thread *thread = args->info;
+    int *statusloc = &thread->status;
+
+    /* Perform any system-dependent setup - this function may not fail */
+    SDL_SYS_SetupThread(thread->name);
+
+    /* Get the thread id */
+    thread->threadid = SDL_ThreadID();
+
+    /* Wake up the parent thread */
+    SDL_SemPost(args->wait);
+
+    /* Run the function */
+    *statusloc = userfunc(userdata);
+
+    /* Clean up thread-local storage */
+    SDL_TLSCleanup();
+
+    /* Mark us as ready to be joined (or detached) */
+    if (!SDL_AtomicCAS(&thread->state, SDL_THREAD_STATE_ALIVE, SDL_THREAD_STATE_ZOMBIE)) {
+        /* Clean up if something already detached us. */
+        if (SDL_AtomicCAS(&thread->state, SDL_THREAD_STATE_DETACHED, SDL_THREAD_STATE_CLEANED)) {
+            if (thread->name) {
+                SDL_free(thread->name);
+            }
+            SDL_free(thread);
+        }
+    }
+}
+
+#ifdef SDL_CreateThread
+#undef SDL_CreateThread
+#undef SDL_CreateThreadWithStackSize
+#endif
+#if SDL_DYNAMIC_API
+#define SDL_CreateThread SDL_CreateThread_REAL
+#define SDL_CreateThreadWithStackSize SDL_CreateThreadWithStackSize_REAL
+#endif
+
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+SDL_Thread *
+SDL_CreateThreadWithStackSize(int (SDLCALL * fn) (void *),
+                 const char *name, const size_t stacksize, void *data,
+                 pfnSDL_CurrentBeginThread pfnBeginThread,
+                 pfnSDL_CurrentEndThread pfnEndThread)
+#else
+SDL_Thread *
+SDL_CreateThreadWithStackSize(int (SDLCALL * fn) (void *),
+                const char *name, const size_t stacksize, void *data)
+#endif
+{
+    SDL_Thread *thread;
+    thread_args *args;
+    int ret;
+
+    /* Allocate memory for the thread info structure */
+    thread = (SDL_Thread *) SDL_malloc(sizeof(*thread));
+    if (thread == NULL) {
+        SDL_OutOfMemory();
+        return (NULL);
+    }
+    SDL_zerop(thread);
+    thread->status = -1;
+    SDL_AtomicSet(&thread->state, SDL_THREAD_STATE_ALIVE);
+
+    /* Set up the arguments for the thread */
+    if (name != NULL) {
+        thread->name = SDL_strdup(name);
+        if (thread->name == NULL) {
+            SDL_OutOfMemory();
+            SDL_free(thread);
+            return (NULL);
+        }
+    }
+
+    /* Set up the arguments for the thread */
+    args = (thread_args *) SDL_malloc(sizeof(*args));
+    if (args == NULL) {
+        SDL_OutOfMemory();
+        if (thread->name) {
+            SDL_free(thread->name);
+        }
+        SDL_free(thread);
+        return (NULL);
+    }
+    args->func = fn;
+    args->data = data;
+    args->info = thread;
+    args->wait = SDL_CreateSemaphore(0);
+    if (args->wait == NULL) {
+        if (thread->name) {
+            SDL_free(thread->name);
+        }
+        SDL_free(thread);
+        SDL_free(args);
+        return (NULL);
+    }
+
+    thread->stacksize = stacksize;
+
+    /* Create the thread and go! */
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+    ret = SDL_SYS_CreateThread(thread, args, pfnBeginThread, pfnEndThread);
+#else
+    ret = SDL_SYS_CreateThread(thread, args);
+#endif
+    if (ret >= 0) {
+        /* Wait for the thread function to use arguments */
+        SDL_SemWait(args->wait);
+    } else {
+        /* Oops, failed.  Gotta free everything */
+        if (thread->name) {
+            SDL_free(thread->name);
+        }
+        SDL_free(thread);
+        thread = NULL;
+    }
+    SDL_DestroySemaphore(args->wait);
+    SDL_free(args);
+
+    /* Everything is running now */
+    return (thread);
+}
+
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+DECLSPEC SDL_Thread *SDLCALL
+SDL_CreateThread(int (SDLCALL * fn) (void *),
+                 const char *name, void *data,
+                 pfnSDL_CurrentBeginThread pfnBeginThread,
+                 pfnSDL_CurrentEndThread pfnEndThread)
+#else
+DECLSPEC SDL_Thread *SDLCALL
+SDL_CreateThread(int (SDLCALL * fn) (void *),
+                 const char *name, void *data)
+#endif
+{
+    /* !!! FIXME: in 2.1, just make stackhint part of the usual API. */
+    const char *stackhint = SDL_GetHint(SDL_HINT_THREAD_STACK_SIZE);
+    size_t stacksize = 0;
+
+    /* If the SDL_HINT_THREAD_STACK_SIZE exists, use it */
+    if (stackhint != NULL) {
+        char *endp = NULL;
+        const Sint64 hintval = SDL_strtoll(stackhint, &endp, 10);
+        if ((*stackhint != '\0') && (*endp == '\0')) {  /* a valid number? */
+            if (hintval > 0) {  /* reject bogus values. */
+                stacksize = (size_t) hintval;
+            }
+        }
+    }
+
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+    return SDL_CreateThreadWithStackSize(fn, name, stacksize, data, pfnBeginThread, pfnEndThread);
+#else
+    return SDL_CreateThreadWithStackSize(fn, name, stacksize, data);
+#endif
+}
+
+SDL_Thread *
+SDL_CreateThreadInternal(int (SDLCALL * fn) (void *), const char *name,
+                         const size_t stacksize, void *data) {
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+    return SDL_CreateThreadWithStackSize(fn, name, stacksize, data, NULL, NULL);
+#else
+    return SDL_CreateThreadWithStackSize(fn, name, stacksize, data);
+#endif
+}
+
+SDL_threadID
+SDL_GetThreadID(SDL_Thread * thread)
+{
+    SDL_threadID id;
+
+    if (thread) {
+        id = thread->threadid;
+    } else {
+        id = SDL_ThreadID();
+    }
+    return id;
+}
+
+const char *
+SDL_GetThreadName(SDL_Thread * thread)
+{
+    if (thread) {
+        return thread->name;
+    } else {
+        return NULL;
+    }
+}
+
+int
+SDL_SetThreadPriority(SDL_ThreadPriority priority)
+{
+    return SDL_SYS_SetThreadPriority(priority);
+}
+
+void
+SDL_WaitThread(SDL_Thread * thread, int *status)
+{
+    if (thread) {
+        SDL_SYS_WaitThread(thread);
+        if (status) {
+            *status = thread->status;
+        }
+        if (thread->name) {
+            SDL_free(thread->name);
+        }
+        SDL_free(thread);
+    }
+}
+
+void
+SDL_DetachThread(SDL_Thread * thread)
+{
+    if (!thread) {
+        return;
+    }
+
+    /* Grab dibs if the state is alive+joinable. */
+    if (SDL_AtomicCAS(&thread->state, SDL_THREAD_STATE_ALIVE, SDL_THREAD_STATE_DETACHED)) {
+        SDL_SYS_DetachThread(thread);
+    } else {
+        /* all other states are pretty final, see where we landed. */
+        const int thread_state = SDL_AtomicGet(&thread->state);
+        if ((thread_state == SDL_THREAD_STATE_DETACHED) || (thread_state == SDL_THREAD_STATE_CLEANED)) {
+            return;  /* already detached (you shouldn't call this twice!) */
+        } else if (thread_state == SDL_THREAD_STATE_ZOMBIE) {
+            SDL_WaitThread(thread, NULL);  /* already done, clean it up. */
+        } else {
+            SDL_assert(0 && "Unexpected thread state");
+        }
+    }
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/SDL_thread_c.h

@@ -0,0 +1,95 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../SDL_internal.h"
+
+#ifndef SDL_thread_c_h_
+#define SDL_thread_c_h_
+
+#include "SDL_thread.h"
+
+/* Need the definitions of SYS_ThreadHandle */
+#if SDL_THREADS_DISABLED
+#include "generic/SDL_systhread_c.h"
+#elif SDL_THREAD_PTHREAD
+#include "pthread/SDL_systhread_c.h"
+#elif SDL_THREAD_WINDOWS
+#include "windows/SDL_systhread_c.h"
+#elif SDL_THREAD_PSP
+#include "psp/SDL_systhread_c.h"
+#elif SDL_THREAD_STDCPP
+#include "stdcpp/SDL_systhread_c.h"
+#else
+#error Need thread implementation for this platform
+#include "generic/SDL_systhread_c.h"
+#endif
+#include "../SDL_error_c.h"
+
+typedef enum SDL_ThreadState
+{
+    SDL_THREAD_STATE_ALIVE,
+    SDL_THREAD_STATE_DETACHED,
+    SDL_THREAD_STATE_ZOMBIE,
+    SDL_THREAD_STATE_CLEANED,
+} SDL_ThreadState;
+
+/* This is the system-independent thread info structure */
+struct SDL_Thread
+{
+    SDL_threadID threadid;
+    SYS_ThreadHandle handle;
+    int status;
+    SDL_atomic_t state;  /* SDL_THREAD_STATE_* */
+    SDL_error errbuf;
+    char *name;
+    size_t stacksize;  /* 0 for default, >0 for user-specified stack size. */
+    void *data;
+};
+
+/* This is the function called to run a thread */
+extern void SDL_RunThread(void *data);
+
+/* This is the system-independent thread local storage structure */
+typedef struct {
+    unsigned int limit;
+    struct {
+        void *data;
+        void (SDLCALL *destructor)(void*);
+    } array[1];
+} SDL_TLSData;
+
+/* This is how many TLS entries we allocate at once */
+#define TLS_ALLOC_CHUNKSIZE 4
+
+/* Get cross-platform, slow, thread local storage for this thread.
+   This is only intended as a fallback if getting real thread-local
+   storage fails or isn't supported on this platform.
+ */
+extern SDL_TLSData *SDL_Generic_GetTLSData(void);
+
+/* Set cross-platform, slow, thread local storage for this thread.
+   This is only intended as a fallback if getting real thread-local
+   storage fails or isn't supported on this platform.
+ */
+extern int SDL_Generic_SetTLSData(SDL_TLSData *data);
+
+#endif /* SDL_thread_c_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_syscond.c

@@ -0,0 +1,220 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* An implementation of condition variables using semaphores and mutexes */
+/*
+   This implementation borrows heavily from the BeOS condition variable
+   implementation, written by Christopher Tate and Owen Smith.  Thanks!
+ */
+
+#include "SDL_thread.h"
+
+struct SDL_cond
+{
+    SDL_mutex *lock;
+    int waiting;
+    int signals;
+    SDL_sem *wait_sem;
+    SDL_sem *wait_done;
+};
+
+/* Create a condition variable */
+SDL_cond *
+SDL_CreateCond(void)
+{
+    SDL_cond *cond;
+
+    cond = (SDL_cond *) SDL_malloc(sizeof(SDL_cond));
+    if (cond) {
+        cond->lock = SDL_CreateMutex();
+        cond->wait_sem = SDL_CreateSemaphore(0);
+        cond->wait_done = SDL_CreateSemaphore(0);
+        cond->waiting = cond->signals = 0;
+        if (!cond->lock || !cond->wait_sem || !cond->wait_done) {
+            SDL_DestroyCond(cond);
+            cond = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return (cond);
+}
+
+/* Destroy a condition variable */
+void
+SDL_DestroyCond(SDL_cond * cond)
+{
+    if (cond) {
+        if (cond->wait_sem) {
+            SDL_DestroySemaphore(cond->wait_sem);
+        }
+        if (cond->wait_done) {
+            SDL_DestroySemaphore(cond->wait_done);
+        }
+        if (cond->lock) {
+            SDL_DestroyMutex(cond->lock);
+        }
+        SDL_free(cond);
+    }
+}
+
+/* Restart one of the threads that are waiting on the condition variable */
+int
+SDL_CondSignal(SDL_cond * cond)
+{
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* If there are waiting threads not already signalled, then
+       signal the condition and wait for the thread to respond.
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->waiting > cond->signals) {
+        ++cond->signals;
+        SDL_SemPost(cond->wait_sem);
+        SDL_UnlockMutex(cond->lock);
+        SDL_SemWait(cond->wait_done);
+    } else {
+        SDL_UnlockMutex(cond->lock);
+    }
+
+    return 0;
+}
+
+/* Restart all threads that are waiting on the condition variable */
+int
+SDL_CondBroadcast(SDL_cond * cond)
+{
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* If there are waiting threads not already signalled, then
+       signal the condition and wait for the thread to respond.
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->waiting > cond->signals) {
+        int i, num_waiting;
+
+        num_waiting = (cond->waiting - cond->signals);
+        cond->signals = cond->waiting;
+        for (i = 0; i < num_waiting; ++i) {
+            SDL_SemPost(cond->wait_sem);
+        }
+        /* Now all released threads are blocked here, waiting for us.
+           Collect them all (and win fabulous prizes!) :-)
+         */
+        SDL_UnlockMutex(cond->lock);
+        for (i = 0; i < num_waiting; ++i) {
+            SDL_SemWait(cond->wait_done);
+        }
+    } else {
+        SDL_UnlockMutex(cond->lock);
+    }
+
+    return 0;
+}
+
+/* Wait on the condition variable for at most 'ms' milliseconds.
+   The mutex must be locked before entering this function!
+   The mutex is unlocked during the wait, and locked again after the wait.
+
+Typical use:
+
+Thread A:
+    SDL_LockMutex(lock);
+    while ( ! condition ) {
+        SDL_CondWait(cond, lock);
+    }
+    SDL_UnlockMutex(lock);
+
+Thread B:
+    SDL_LockMutex(lock);
+    ...
+    condition = true;
+    ...
+    SDL_CondSignal(cond);
+    SDL_UnlockMutex(lock);
+ */
+int
+SDL_CondWaitTimeout(SDL_cond * cond, SDL_mutex * mutex, Uint32 ms)
+{
+    int retval;
+
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* Obtain the protection mutex, and increment the number of waiters.
+       This allows the signal mechanism to only perform a signal if there
+       are waiting threads.
+     */
+    SDL_LockMutex(cond->lock);
+    ++cond->waiting;
+    SDL_UnlockMutex(cond->lock);
+
+    /* Unlock the mutex, as is required by condition variable semantics */
+    SDL_UnlockMutex(mutex);
+
+    /* Wait for a signal */
+    if (ms == SDL_MUTEX_MAXWAIT) {
+        retval = SDL_SemWait(cond->wait_sem);
+    } else {
+        retval = SDL_SemWaitTimeout(cond->wait_sem, ms);
+    }
+
+    /* Let the signaler know we have completed the wait, otherwise
+       the signaler can race ahead and get the condition semaphore
+       if we are stopped between the mutex unlock and semaphore wait,
+       giving a deadlock.  See the following URL for details:
+       http://web.archive.org/web/20010914175514/http://www-classic.be.com/aboutbe/benewsletter/volume_III/Issue40.html#Workshop
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->signals > 0) {
+        /* If we timed out, we need to eat a condition signal */
+        if (retval > 0) {
+            SDL_SemWait(cond->wait_sem);
+        }
+        /* We always notify the signal thread that we are done */
+        SDL_SemPost(cond->wait_done);
+
+        /* Signal handshake complete */
+        --cond->signals;
+    }
+    --cond->waiting;
+    SDL_UnlockMutex(cond->lock);
+
+    /* Lock the mutex, as is required by condition variable semantics */
+    SDL_LockMutex(mutex);
+
+    return retval;
+}
+
+/* Wait on the condition variable forever */
+int
+SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex)
+{
+    return SDL_CondWaitTimeout(cond, mutex, SDL_MUTEX_MAXWAIT);
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_sysmutex.c

@@ -0,0 +1,165 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* An implementation of mutexes using semaphores */
+
+#include "SDL_thread.h"
+#include "SDL_systhread_c.h"
+
+
+struct SDL_mutex
+{
+    int recursive;
+    SDL_threadID owner;
+    SDL_sem *sem;
+};
+
+/* Create a mutex */
+SDL_mutex *
+SDL_CreateMutex(void)
+{
+    SDL_mutex *mutex;
+
+    /* Allocate mutex memory */
+    mutex = (SDL_mutex *) SDL_malloc(sizeof(*mutex));
+    if (mutex) {
+        /* Create the mutex semaphore, with initial value 1 */
+        mutex->sem = SDL_CreateSemaphore(1);
+        mutex->recursive = 0;
+        mutex->owner = 0;
+        if (!mutex->sem) {
+            SDL_free(mutex);
+            mutex = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return mutex;
+}
+
+/* Free the mutex */
+void
+SDL_DestroyMutex(SDL_mutex * mutex)
+{
+    if (mutex) {
+        if (mutex->sem) {
+            SDL_DestroySemaphore(mutex->sem);
+        }
+        SDL_free(mutex);
+    }
+}
+
+/* Lock the mutex */
+int
+SDL_LockMutex(SDL_mutex * mutex)
+{
+#if SDL_THREADS_DISABLED
+    return 0;
+#else
+    SDL_threadID this_thread;
+
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    this_thread = SDL_ThreadID();
+    if (mutex->owner == this_thread) {
+        ++mutex->recursive;
+    } else {
+        /* The order of operations is important.
+           We set the locking thread id after we obtain the lock
+           so unlocks from other threads will fail.
+         */
+        SDL_SemWait(mutex->sem);
+        mutex->owner = this_thread;
+        mutex->recursive = 0;
+    }
+
+    return 0;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+/* try Lock the mutex */
+int
+SDL_TryLockMutex(SDL_mutex * mutex)
+{
+#if SDL_THREADS_DISABLED
+    return 0;
+#else
+    int retval = 0;
+    SDL_threadID this_thread;
+
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    this_thread = SDL_ThreadID();
+    if (mutex->owner == this_thread) {
+        ++mutex->recursive;
+    } else {
+        /* The order of operations is important.
+         We set the locking thread id after we obtain the lock
+         so unlocks from other threads will fail.
+         */
+        retval = SDL_SemWait(mutex->sem);
+        if (retval == 0) {
+            mutex->owner = this_thread;
+            mutex->recursive = 0;
+        }
+    }
+
+    return retval;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+/* Unlock the mutex */
+int
+SDL_mutexV(SDL_mutex * mutex)
+{
+#if SDL_THREADS_DISABLED
+    return 0;
+#else
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    /* If we don't own the mutex, we can't unlock it */
+    if (SDL_ThreadID() != mutex->owner) {
+        return SDL_SetError("mutex not owned by this thread");
+    }
+
+    if (mutex->recursive) {
+        --mutex->recursive;
+    } else {
+        /* The order of operations is important.
+           First reset the owner so another thread doesn't lock
+           the mutex and set the ownership before we reset it,
+           then release the lock semaphore.
+         */
+        mutex->owner = 0;
+        SDL_SemPost(mutex->sem);
+    }
+    return 0;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_sysmutex_c.h

@@ -0,0 +1,22 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_syssem.c

@@ -0,0 +1,217 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* An implementation of semaphores using mutexes and condition variables */
+
+#include "SDL_timer.h"
+#include "SDL_thread.h"
+#include "SDL_systhread_c.h"
+
+
+#if SDL_THREADS_DISABLED
+
+SDL_sem *
+SDL_CreateSemaphore(Uint32 initial_value)
+{
+    SDL_SetError("SDL not built with thread support");
+    return (SDL_sem *) 0;
+}
+
+void
+SDL_DestroySemaphore(SDL_sem * sem)
+{
+}
+
+int
+SDL_SemTryWait(SDL_sem * sem)
+{
+    return SDL_SetError("SDL not built with thread support");
+}
+
+int
+SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout)
+{
+    return SDL_SetError("SDL not built with thread support");
+}
+
+int
+SDL_SemWait(SDL_sem * sem)
+{
+    return SDL_SetError("SDL not built with thread support");
+}
+
+Uint32
+SDL_SemValue(SDL_sem * sem)
+{
+    return 0;
+}
+
+int
+SDL_SemPost(SDL_sem * sem)
+{
+    return SDL_SetError("SDL not built with thread support");
+}
+
+#else
+
+struct SDL_semaphore
+{
+    Uint32 count;
+    Uint32 waiters_count;
+    SDL_mutex *count_lock;
+    SDL_cond *count_nonzero;
+};
+
+SDL_sem *
+SDL_CreateSemaphore(Uint32 initial_value)
+{
+    SDL_sem *sem;
+
+    sem = (SDL_sem *) SDL_malloc(sizeof(*sem));
+    if (!sem) {
+        SDL_OutOfMemory();
+        return NULL;
+    }
+    sem->count = initial_value;
+    sem->waiters_count = 0;
+
+    sem->count_lock = SDL_CreateMutex();
+    sem->count_nonzero = SDL_CreateCond();
+    if (!sem->count_lock || !sem->count_nonzero) {
+        SDL_DestroySemaphore(sem);
+        return NULL;
+    }
+
+    return sem;
+}
+
+/* WARNING:
+   You cannot call this function when another thread is using the semaphore.
+*/
+void
+SDL_DestroySemaphore(SDL_sem * sem)
+{
+    if (sem) {
+        sem->count = 0xFFFFFFFF;
+        while (sem->waiters_count > 0) {
+            SDL_CondSignal(sem->count_nonzero);
+            SDL_Delay(10);
+        }
+        SDL_DestroyCond(sem->count_nonzero);
+        if (sem->count_lock) {
+            SDL_LockMutex(sem->count_lock);
+            SDL_UnlockMutex(sem->count_lock);
+            SDL_DestroyMutex(sem->count_lock);
+        }
+        SDL_free(sem);
+    }
+}
+
+int
+SDL_SemTryWait(SDL_sem * sem)
+{
+    int retval;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    retval = SDL_MUTEX_TIMEDOUT;
+    SDL_LockMutex(sem->count_lock);
+    if (sem->count > 0) {
+        --sem->count;
+        retval = 0;
+    }
+    SDL_UnlockMutex(sem->count_lock);
+
+    return retval;
+}
+
+int
+SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout)
+{
+    int retval;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    /* A timeout of 0 is an easy case */
+    if (timeout == 0) {
+        return SDL_SemTryWait(sem);
+    }
+
+    SDL_LockMutex(sem->count_lock);
+    ++sem->waiters_count;
+    retval = 0;
+    while ((sem->count == 0) && (retval != SDL_MUTEX_TIMEDOUT)) {
+        retval = SDL_CondWaitTimeout(sem->count_nonzero,
+                                     sem->count_lock, timeout);
+    }
+    --sem->waiters_count;
+    if (retval == 0) {
+        --sem->count;
+    }
+    SDL_UnlockMutex(sem->count_lock);
+
+    return retval;
+}
+
+int
+SDL_SemWait(SDL_sem * sem)
+{
+    return SDL_SemWaitTimeout(sem, SDL_MUTEX_MAXWAIT);
+}
+
+Uint32
+SDL_SemValue(SDL_sem * sem)
+{
+    Uint32 value;
+
+    value = 0;
+    if (sem) {
+        SDL_LockMutex(sem->count_lock);
+        value = sem->count;
+        SDL_UnlockMutex(sem->count_lock);
+    }
+    return value;
+}
+
+int
+SDL_SemPost(SDL_sem * sem)
+{
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    SDL_LockMutex(sem->count_lock);
+    if (sem->waiters_count > 0) {
+        SDL_CondSignal(sem->count_nonzero);
+    }
+    ++sem->count;
+    SDL_UnlockMutex(sem->count_lock);
+
+    return 0;
+}
+
+#endif /* SDL_THREADS_DISABLED */
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_systhread.c

@@ -0,0 +1,71 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* Thread management routines for SDL */
+
+#include "SDL_thread.h"
+#include "../SDL_systhread.h"
+
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args,
+                     pfnSDL_CurrentBeginThread pfnBeginThread,
+                     pfnSDL_CurrentEndThread pfnEndThread)
+#else
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args)
+#endif /* SDL_PASSED_BEGINTHREAD_ENDTHREAD */
+{
+    return SDL_SetError("Threads are not supported on this platform");
+}
+
+void
+SDL_SYS_SetupThread(const char *name)
+{
+    return;
+}
+
+SDL_threadID
+SDL_ThreadID(void)
+{
+    return (0);
+}
+
+int
+SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority)
+{
+    return (0);
+}
+
+void
+SDL_SYS_WaitThread(SDL_Thread * thread)
+{
+    return;
+}
+
+void
+SDL_SYS_DetachThread(SDL_Thread * thread)
+{
+    return;
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_systhread_c.h

@@ -0,0 +1,26 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* Stub until we implement threads on this platform */
+typedef int SYS_ThreadHandle;
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/generic/SDL_systls.c

@@ -0,0 +1,38 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#include "../../SDL_internal.h"
+#include "../SDL_thread_c.h"
+
+
+SDL_TLSData *
+SDL_SYS_GetTLSData(void)
+{
+    return SDL_Generic_GetTLSData();
+}
+
+int
+SDL_SYS_SetTLSData(SDL_TLSData *data)
+{
+    return SDL_Generic_SetTLSData(data);
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/psp/SDL_syscond.c

@@ -0,0 +1,224 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_PSP
+
+/* An implementation of condition variables using semaphores and mutexes */
+/*
+   This implementation borrows heavily from the BeOS condition variable
+   implementation, written by Christopher Tate and Owen Smith.  Thanks!
+ */
+
+#include "SDL_thread.h"
+
+struct SDL_cond
+{
+    SDL_mutex *lock;
+    int waiting;
+    int signals;
+    SDL_sem *wait_sem;
+    SDL_sem *wait_done;
+};
+
+/* Create a condition variable */
+SDL_cond *
+SDL_CreateCond(void)
+{
+    SDL_cond *cond;
+
+    cond = (SDL_cond *) SDL_malloc(sizeof(SDL_cond));
+    if (cond) {
+        cond->lock = SDL_CreateMutex();
+        cond->wait_sem = SDL_CreateSemaphore(0);
+        cond->wait_done = SDL_CreateSemaphore(0);
+        cond->waiting = cond->signals = 0;
+        if (!cond->lock || !cond->wait_sem || !cond->wait_done) {
+            SDL_DestroyCond(cond);
+            cond = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return (cond);
+}
+
+/* Destroy a condition variable */
+void
+SDL_DestroyCond(SDL_cond * cond)
+{
+    if (cond) {
+        if (cond->wait_sem) {
+            SDL_DestroySemaphore(cond->wait_sem);
+        }
+        if (cond->wait_done) {
+            SDL_DestroySemaphore(cond->wait_done);
+        }
+        if (cond->lock) {
+            SDL_DestroyMutex(cond->lock);
+        }
+        SDL_free(cond);
+    }
+}
+
+/* Restart one of the threads that are waiting on the condition variable */
+int
+SDL_CondSignal(SDL_cond * cond)
+{
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* If there are waiting threads not already signalled, then
+       signal the condition and wait for the thread to respond.
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->waiting > cond->signals) {
+        ++cond->signals;
+        SDL_SemPost(cond->wait_sem);
+        SDL_UnlockMutex(cond->lock);
+        SDL_SemWait(cond->wait_done);
+    } else {
+        SDL_UnlockMutex(cond->lock);
+    }
+
+    return 0;
+}
+
+/* Restart all threads that are waiting on the condition variable */
+int
+SDL_CondBroadcast(SDL_cond * cond)
+{
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* If there are waiting threads not already signalled, then
+       signal the condition and wait for the thread to respond.
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->waiting > cond->signals) {
+        int i, num_waiting;
+
+        num_waiting = (cond->waiting - cond->signals);
+        cond->signals = cond->waiting;
+        for (i = 0; i < num_waiting; ++i) {
+            SDL_SemPost(cond->wait_sem);
+        }
+        /* Now all released threads are blocked here, waiting for us.
+           Collect them all (and win fabulous prizes!) :-)
+         */
+        SDL_UnlockMutex(cond->lock);
+        for (i = 0; i < num_waiting; ++i) {
+            SDL_SemWait(cond->wait_done);
+        }
+    } else {
+        SDL_UnlockMutex(cond->lock);
+    }
+
+    return 0;
+}
+
+/* Wait on the condition variable for at most 'ms' milliseconds.
+   The mutex must be locked before entering this function!
+   The mutex is unlocked during the wait, and locked again after the wait.
+
+Typical use:
+
+Thread A:
+    SDL_LockMutex(lock);
+    while ( ! condition ) {
+        SDL_CondWait(cond, lock);
+    }
+    SDL_UnlockMutex(lock);
+
+Thread B:
+    SDL_LockMutex(lock);
+    ...
+    condition = true;
+    ...
+    SDL_CondSignal(cond);
+    SDL_UnlockMutex(lock);
+ */
+int
+SDL_CondWaitTimeout(SDL_cond * cond, SDL_mutex * mutex, Uint32 ms)
+{
+    int retval;
+
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    /* Obtain the protection mutex, and increment the number of waiters.
+       This allows the signal mechanism to only perform a signal if there
+       are waiting threads.
+     */
+    SDL_LockMutex(cond->lock);
+    ++cond->waiting;
+    SDL_UnlockMutex(cond->lock);
+
+    /* Unlock the mutex, as is required by condition variable semantics */
+    SDL_UnlockMutex(mutex);
+
+    /* Wait for a signal */
+    if (ms == SDL_MUTEX_MAXWAIT) {
+        retval = SDL_SemWait(cond->wait_sem);
+    } else {
+        retval = SDL_SemWaitTimeout(cond->wait_sem, ms);
+    }
+
+    /* Let the signaler know we have completed the wait, otherwise
+       the signaler can race ahead and get the condition semaphore
+       if we are stopped between the mutex unlock and semaphore wait,
+       giving a deadlock.  See the following URL for details:
+       http://www-classic.be.com/aboutbe/benewsletter/volume_III/Issue40.html
+     */
+    SDL_LockMutex(cond->lock);
+    if (cond->signals > 0) {
+        /* If we timed out, we need to eat a condition signal */
+        if (retval > 0) {
+            SDL_SemWait(cond->wait_sem);
+        }
+        /* We always notify the signal thread that we are done */
+        SDL_SemPost(cond->wait_done);
+
+        /* Signal handshake complete */
+        --cond->signals;
+    }
+    --cond->waiting;
+    SDL_UnlockMutex(cond->lock);
+
+    /* Lock the mutex, as is required by condition variable semantics */
+    SDL_LockMutex(mutex);
+
+    return retval;
+}
+
+/* Wait on the condition variable forever */
+int
+SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex)
+{
+    return SDL_CondWaitTimeout(cond, mutex, SDL_MUTEX_MAXWAIT);
+}
+
+#endif /* SDL_THREAD_PSP */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/psp/SDL_sysmutex.c

@@ -0,0 +1,136 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_PSP
+
+/* An implementation of mutexes using semaphores */
+
+#include "SDL_thread.h"
+#include "SDL_systhread_c.h"
+
+
+struct SDL_mutex
+{
+    int recursive;
+    SDL_threadID owner;
+    SDL_sem *sem;
+};
+
+/* Create a mutex */
+SDL_mutex *
+SDL_CreateMutex(void)
+{
+    SDL_mutex *mutex;
+
+    /* Allocate mutex memory */
+    mutex = (SDL_mutex *) SDL_malloc(sizeof(*mutex));
+    if (mutex) {
+        /* Create the mutex semaphore, with initial value 1 */
+        mutex->sem = SDL_CreateSemaphore(1);
+        mutex->recursive = 0;
+        mutex->owner = 0;
+        if (!mutex->sem) {
+            SDL_free(mutex);
+            mutex = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return mutex;
+}
+
+/* Free the mutex */
+void
+SDL_DestroyMutex(SDL_mutex * mutex)
+{
+    if (mutex) {
+        if (mutex->sem) {
+            SDL_DestroySemaphore(mutex->sem);
+        }
+        SDL_free(mutex);
+    }
+}
+
+/* Lock the semaphore */
+int
+SDL_mutexP(SDL_mutex * mutex)
+{
+#if SDL_THREADS_DISABLED
+    return 0;
+#else
+    SDL_threadID this_thread;
+
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    this_thread = SDL_ThreadID();
+    if (mutex->owner == this_thread) {
+        ++mutex->recursive;
+    } else {
+        /* The order of operations is important.
+           We set the locking thread id after we obtain the lock
+           so unlocks from other threads will fail.
+         */
+        SDL_SemWait(mutex->sem);
+        mutex->owner = this_thread;
+        mutex->recursive = 0;
+    }
+
+    return 0;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+/* Unlock the mutex */
+int
+SDL_mutexV(SDL_mutex * mutex)
+{
+#if SDL_THREADS_DISABLED
+    return 0;
+#else
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    /* If we don't own the mutex, we can't unlock it */
+    if (SDL_ThreadID() != mutex->owner) {
+        return SDL_SetError("mutex not owned by this thread");
+    }
+
+    if (mutex->recursive) {
+        --mutex->recursive;
+    } else {
+        /* The order of operations is important.
+           First reset the owner so another thread doesn't lock
+           the mutex and set the ownership before we reset it,
+           then release the lock semaphore.
+         */
+        mutex->owner = 0;
+        SDL_SemPost(mutex->sem);
+    }
+    return 0;
+#endif /* SDL_THREADS_DISABLED */
+}
+
+#endif /* SDL_THREAD_PSP */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/psp/SDL_sysmutex_c.h

@@ -0,0 +1,22 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/psp/SDL_syssem.c

@@ -0,0 +1,161 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_PSP
+
+/* Semaphore functions for the PSP. */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "SDL_error.h"
+#include "SDL_thread.h"
+
+#include <pspthreadman.h>
+#include <pspkerror.h>
+
+struct SDL_semaphore {
+    SceUID  semid;
+};
+
+
+/* Create a semaphore */
+SDL_sem *SDL_CreateSemaphore(Uint32 initial_value)
+{
+    SDL_sem *sem;
+
+    sem = (SDL_sem *) malloc(sizeof(*sem));
+    if (sem != NULL) {
+        /* TODO: Figure out the limit on the maximum value. */
+        sem->semid = sceKernelCreateSema("SDL sema", 0, initial_value, 255, NULL);
+        if (sem->semid < 0) {
+            SDL_SetError("Couldn't create semaphore");
+            free(sem);
+            sem = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+
+    return sem;
+}
+
+/* Free the semaphore */
+void SDL_DestroySemaphore(SDL_sem *sem)
+{
+    if (sem != NULL) {
+        if (sem->semid > 0) {
+            sceKernelDeleteSema(sem->semid);
+            sem->semid = 0;
+        }
+
+        free(sem);
+    }
+}
+
+/* TODO: This routine is a bit overloaded.
+ * If the timeout is 0 then just poll the semaphore; if it's SDL_MUTEX_MAXWAIT, pass
+ * NULL to sceKernelWaitSema() so that it waits indefinitely; and if the timeout
+ * is specified, convert it to microseconds. */
+int SDL_SemWaitTimeout(SDL_sem *sem, Uint32 timeout)
+{
+    Uint32 *pTimeout;
+    int res;
+
+    if (sem == NULL) {
+        SDL_SetError("Passed a NULL sem");
+        return 0;
+    }
+
+    if (timeout == 0) {
+        res = sceKernelPollSema(sem->semid, 1);
+        if (res < 0) {
+            return SDL_MUTEX_TIMEDOUT;
+        }
+        return 0;
+    }
+
+    if (timeout == SDL_MUTEX_MAXWAIT) {
+        pTimeout = NULL;
+    } else {
+        timeout *= 1000;  /* Convert to microseconds. */
+        pTimeout = &timeout;
+    }
+
+    res = sceKernelWaitSema(sem->semid, 1, pTimeout);
+       switch (res) {
+               case SCE_KERNEL_ERROR_OK:
+                       return 0;
+               case SCE_KERNEL_ERROR_WAIT_TIMEOUT:
+                       return SDL_MUTEX_TIMEDOUT;
+               default:
+                       return SDL_SetError("sceKernelWaitSema() failed");
+    }
+}
+
+int SDL_SemTryWait(SDL_sem *sem)
+{
+    return SDL_SemWaitTimeout(sem, 0);
+}
+
+int SDL_SemWait(SDL_sem *sem)
+{
+    return SDL_SemWaitTimeout(sem, SDL_MUTEX_MAXWAIT);
+}
+
+/* Returns the current count of the semaphore */
+Uint32 SDL_SemValue(SDL_sem *sem)
+{
+    SceKernelSemaInfo info;
+
+    if (sem == NULL) {
+        SDL_SetError("Passed a NULL sem");
+        return 0;
+    }
+
+    if (sceKernelReferSemaStatus(sem->semid, &info) >= 0) {
+        return info.currentCount;
+    }
+
+    return 0;
+}
+
+int SDL_SemPost(SDL_sem *sem)
+{
+    int res;
+
+    if (sem == NULL) {
+        return SDL_SetError("Passed a NULL sem");
+    }
+
+    res = sceKernelSignalSema(sem->semid, 1);
+    if (res < 0) {
+        return SDL_SetError("sceKernelSignalSema() failed");
+    }
+
+    return 0;
+}
+
+#endif /* SDL_THREAD_PSP */
+
+/* vim: ts=4 sw=4
+ */

externals/SDL/src/thread/psp/SDL_systhread.c

@@ -0,0 +1,114 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_PSP
+
+/* PSP thread management routines for SDL */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "SDL_error.h"
+#include "SDL_thread.h"
+#include "../SDL_systhread.h"
+#include "../SDL_thread_c.h"
+#include <pspkerneltypes.h>
+#include <pspthreadman.h>
+
+
+static int ThreadEntry(SceSize args, void *argp)
+{
+    SDL_RunThread(*(void **) argp);
+    return 0;
+}
+
+int SDL_SYS_CreateThread(SDL_Thread *thread, void *args)
+{
+    SceKernelThreadInfo status;
+    int priority = 32;
+
+    /* Set priority of new thread to the same as the current thread */
+    status.size = sizeof(SceKernelThreadInfo);
+    if (sceKernelReferThreadStatus(sceKernelGetThreadId(), &status) == 0) {
+        priority = status.currentPriority;
+    }
+
+    thread->handle = sceKernelCreateThread(thread->name, ThreadEntry,
+                           priority, thread->stacksize ? ((int) thread->stacksize) : 0x8000,
+                           PSP_THREAD_ATTR_VFPU, NULL);
+    if (thread->handle < 0) {
+        return SDL_SetError("sceKernelCreateThread() failed");
+    }
+
+    sceKernelStartThread(thread->handle, 4, &args);
+    return 0;
+}
+
+void SDL_SYS_SetupThread(const char *name)
+{
+    /* Do nothing. */
+}
+
+SDL_threadID SDL_ThreadID(void)
+{
+    return (SDL_threadID) sceKernelGetThreadId();
+}
+
+void SDL_SYS_WaitThread(SDL_Thread *thread)
+{
+    sceKernelWaitThreadEnd(thread->handle, NULL);
+    sceKernelDeleteThread(thread->handle);
+}
+
+void SDL_SYS_DetachThread(SDL_Thread *thread)
+{
+    /* !!! FIXME: is this correct? */
+    sceKernelDeleteThread(thread->handle);
+}
+
+void SDL_SYS_KillThread(SDL_Thread *thread)
+{
+    sceKernelTerminateDeleteThread(thread->handle);
+}
+
+int SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority)
+{
+    int value;
+
+    if (priority == SDL_THREAD_PRIORITY_LOW) {
+        value = 19;
+    } else if (priority == SDL_THREAD_PRIORITY_HIGH) {
+        value = -10;
+    } else if (priority == SDL_THREAD_PRIORITY_TIME_CRITICAL) {
+        value = -20;
+    } else {
+        value = 0;
+    }
+
+    return sceKernelChangeThreadPriority(sceKernelGetThreadId(),value);
+
+}
+
+#endif /* SDL_THREAD_PSP */
+
+/* vim: ts=4 sw=4
+ */

externals/SDL/src/thread/psp/SDL_systhread_c.h

@@ -0,0 +1,24 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#include <pspkerneltypes.h>
+
+typedef SceUID SYS_ThreadHandle;

externals/SDL/src/thread/pthread/SDL_syscond.c

@@ -0,0 +1,158 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#include <sys/time.h>
+#include <time.h>
+#include <unistd.h>
+#include <errno.h>
+#include <pthread.h>
+
+#include "SDL_thread.h"
+#include "SDL_sysmutex_c.h"
+
+struct SDL_cond
+{
+    pthread_cond_t cond;
+};
+
+/* Create a condition variable */
+SDL_cond *
+SDL_CreateCond(void)
+{
+    SDL_cond *cond;
+
+    cond = (SDL_cond *) SDL_malloc(sizeof(SDL_cond));
+    if (cond) {
+        if (pthread_cond_init(&cond->cond, NULL) != 0) {
+            SDL_SetError("pthread_cond_init() failed");
+            SDL_free(cond);
+            cond = NULL;
+        }
+    }
+    return (cond);
+}
+
+/* Destroy a condition variable */
+void
+SDL_DestroyCond(SDL_cond * cond)
+{
+    if (cond) {
+        pthread_cond_destroy(&cond->cond);
+        SDL_free(cond);
+    }
+}
+
+/* Restart one of the threads that are waiting on the condition variable */
+int
+SDL_CondSignal(SDL_cond * cond)
+{
+    int retval;
+
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    retval = 0;
+    if (pthread_cond_signal(&cond->cond) != 0) {
+        return SDL_SetError("pthread_cond_signal() failed");
+    }
+    return retval;
+}
+
+/* Restart all threads that are waiting on the condition variable */
+int
+SDL_CondBroadcast(SDL_cond * cond)
+{
+    int retval;
+
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+    retval = 0;
+    if (pthread_cond_broadcast(&cond->cond) != 0) {
+        return SDL_SetError("pthread_cond_broadcast() failed");
+    }
+    return retval;
+}
+
+int
+SDL_CondWaitTimeout(SDL_cond * cond, SDL_mutex * mutex, Uint32 ms)
+{
+    int retval;
+#ifndef HAVE_CLOCK_GETTIME
+    struct timeval delta;
+#endif
+    struct timespec abstime;
+
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    }
+
+#ifdef HAVE_CLOCK_GETTIME
+    clock_gettime(CLOCK_REALTIME, &abstime);
+
+    abstime.tv_nsec += (ms % 1000) * 1000000;
+    abstime.tv_sec += ms / 1000;
+#else
+    gettimeofday(&delta, NULL);
+
+    abstime.tv_sec = delta.tv_sec + (ms / 1000);
+    abstime.tv_nsec = (delta.tv_usec + (ms % 1000) * 1000) * 1000;
+#endif
+    if (abstime.tv_nsec > 1000000000) {
+        abstime.tv_sec += 1;
+        abstime.tv_nsec -= 1000000000;
+    }
+
+  tryagain:
+    retval = pthread_cond_timedwait(&cond->cond, &mutex->id, &abstime);
+    switch (retval) {
+    case EINTR:
+        goto tryagain;
+        /* break; -Wunreachable-code-break */
+    case ETIMEDOUT:
+        retval = SDL_MUTEX_TIMEDOUT;
+        break;
+    case 0:
+        break;
+    default:
+        retval = SDL_SetError("pthread_cond_timedwait() failed");
+    }
+    return retval;
+}
+
+/* Wait on the condition variable, unlocking the provided mutex.
+   The mutex must be locked before entering this function!
+ */
+int
+SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex)
+{
+    if (!cond) {
+        return SDL_SetError("Passed a NULL condition variable");
+    } else if (pthread_cond_wait(&cond->cond, &mutex->id) != 0) {
+        return SDL_SetError("pthread_cond_wait() failed");
+    }
+    return 0;
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_sysmutex.c

@@ -0,0 +1,195 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#include <errno.h>
+#include <pthread.h>
+
+#include "SDL_thread.h"
+
+#if !SDL_THREAD_PTHREAD_RECURSIVE_MUTEX && \
+    !SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP
+#define FAKE_RECURSIVE_MUTEX 1
+#endif
+
+struct SDL_mutex
+{
+    pthread_mutex_t id;
+#if FAKE_RECURSIVE_MUTEX
+    int recursive;
+    pthread_t owner;
+#endif
+};
+
+SDL_mutex *
+SDL_CreateMutex(void)
+{
+    SDL_mutex *mutex;
+    pthread_mutexattr_t attr;
+
+    /* Allocate the structure */
+    mutex = (SDL_mutex *) SDL_calloc(1, sizeof(*mutex));
+    if (mutex) {
+        pthread_mutexattr_init(&attr);
+#if SDL_THREAD_PTHREAD_RECURSIVE_MUTEX
+        pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
+#elif SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP
+        pthread_mutexattr_setkind_np(&attr, PTHREAD_MUTEX_RECURSIVE_NP);
+#else
+        /* No extra attributes necessary */
+#endif
+        if (pthread_mutex_init(&mutex->id, &attr) != 0) {
+            SDL_SetError("pthread_mutex_init() failed");
+            SDL_free(mutex);
+            mutex = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return (mutex);
+}
+
+void
+SDL_DestroyMutex(SDL_mutex * mutex)
+{
+    if (mutex) {
+        pthread_mutex_destroy(&mutex->id);
+        SDL_free(mutex);
+    }
+}
+
+/* Lock the mutex */
+int
+SDL_LockMutex(SDL_mutex * mutex)
+{
+#if FAKE_RECURSIVE_MUTEX
+    pthread_t this_thread;
+#endif
+
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+#if FAKE_RECURSIVE_MUTEX
+    this_thread = pthread_self();
+    if (mutex->owner == this_thread) {
+        ++mutex->recursive;
+    } else {
+        /* The order of operations is important.
+           We set the locking thread id after we obtain the lock
+           so unlocks from other threads will fail.
+         */
+        if (pthread_mutex_lock(&mutex->id) == 0) {
+            mutex->owner = this_thread;
+            mutex->recursive = 0;
+        } else {
+            return SDL_SetError("pthread_mutex_lock() failed");
+        }
+    }
+#else
+    if (pthread_mutex_lock(&mutex->id) != 0) {
+        return SDL_SetError("pthread_mutex_lock() failed");
+    }
+#endif
+    return 0;
+}
+
+int
+SDL_TryLockMutex(SDL_mutex * mutex)
+{
+    int retval;
+    int result;
+#if FAKE_RECURSIVE_MUTEX
+    pthread_t this_thread;
+#endif
+
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    retval = 0;
+#if FAKE_RECURSIVE_MUTEX
+    this_thread = pthread_self();
+    if (mutex->owner == this_thread) {
+        ++mutex->recursive;
+    } else {
+        /* The order of operations is important.
+         We set the locking thread id after we obtain the lock
+         so unlocks from other threads will fail.
+         */
+        result = pthread_mutex_trylock(&mutex->id);
+        if (result == 0) {
+            mutex->owner = this_thread;
+            mutex->recursive = 0;
+        } else if (result == EBUSY) {
+            retval = SDL_MUTEX_TIMEDOUT;
+        } else {
+            retval = SDL_SetError("pthread_mutex_trylock() failed");
+        }
+    }
+#else
+    result = pthread_mutex_trylock(&mutex->id);
+    if (result != 0) {
+        if (result == EBUSY) {
+            retval = SDL_MUTEX_TIMEDOUT;
+        } else {
+            retval = SDL_SetError("pthread_mutex_trylock() failed");
+        }
+    }
+#endif
+    return retval;
+}
+
+int
+SDL_UnlockMutex(SDL_mutex * mutex)
+{
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+#if FAKE_RECURSIVE_MUTEX
+    /* We can only unlock the mutex if we own it */
+    if (pthread_self() == mutex->owner) {
+        if (mutex->recursive) {
+            --mutex->recursive;
+        } else {
+            /* The order of operations is important.
+               First reset the owner so another thread doesn't lock
+               the mutex and set the ownership before we reset it,
+               then release the lock semaphore.
+             */
+            mutex->owner = 0;
+            pthread_mutex_unlock(&mutex->id);
+        }
+    } else {
+        return SDL_SetError("mutex not owned by this thread");
+    }
+
+#else
+    if (pthread_mutex_unlock(&mutex->id) != 0) {
+        return SDL_SetError("pthread_mutex_unlock() failed");
+    }
+#endif /* FAKE_RECURSIVE_MUTEX */
+
+    return 0;
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_sysmutex_c.h

@@ -0,0 +1,32 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#ifndef SDL_mutex_c_h_
+#define SDL_mutex_c_h_
+
+struct SDL_mutex
+{
+    pthread_mutex_t id;
+};
+
+#endif /* SDL_mutex_c_h_ */
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_syssem.c

@@ -0,0 +1,209 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#include <errno.h>
+#include <pthread.h>
+#include <semaphore.h>
+#include <sys/time.h>
+#include <time.h>
+
+#include "SDL_thread.h"
+#include "SDL_timer.h"
+
+/* Wrapper around POSIX 1003.1b semaphores */
+
+#if defined(__MACOSX__) || defined(__IPHONEOS__)
+/* Mac OS X doesn't support sem_getvalue() as of version 10.4 */
+#include "../generic/SDL_syssem.c"
+#else
+
+struct SDL_semaphore
+{
+    sem_t sem;
+};
+
+/* Create a semaphore, initialized with value */
+SDL_sem *
+SDL_CreateSemaphore(Uint32 initial_value)
+{
+    SDL_sem *sem = (SDL_sem *) SDL_malloc(sizeof(SDL_sem));
+    if (sem) {
+        if (sem_init(&sem->sem, 0, initial_value) < 0) {
+            SDL_SetError("sem_init() failed");
+            SDL_free(sem);
+            sem = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return sem;
+}
+
+void
+SDL_DestroySemaphore(SDL_sem * sem)
+{
+    if (sem) {
+        sem_destroy(&sem->sem);
+        SDL_free(sem);
+    }
+}
+
+int
+SDL_SemTryWait(SDL_sem * sem)
+{
+    int retval;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+    retval = SDL_MUTEX_TIMEDOUT;
+    if (sem_trywait(&sem->sem) == 0) {
+        retval = 0;
+    }
+    return retval;
+}
+
+int
+SDL_SemWait(SDL_sem * sem)
+{
+    int retval;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    do {
+        retval = sem_wait(&sem->sem);
+    } while (retval < 0 && errno == EINTR);
+
+    if (retval < 0) {
+        retval = SDL_SetError("sem_wait() failed");
+    }
+    return retval;
+}
+
+int
+SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout)
+{
+    int retval;
+#ifdef HAVE_SEM_TIMEDWAIT
+#ifndef HAVE_CLOCK_GETTIME
+    struct timeval now;
+#endif
+    struct timespec ts_timeout;
+#else
+    Uint32 end;
+#endif
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    /* Try the easy cases first */
+    if (timeout == 0) {
+        return SDL_SemTryWait(sem);
+    }
+    if (timeout == SDL_MUTEX_MAXWAIT) {
+        return SDL_SemWait(sem);
+    }
+
+#ifdef HAVE_SEM_TIMEDWAIT
+    /* Setup the timeout. sem_timedwait doesn't wait for
+    * a lapse of time, but until we reach a certain time.
+    * This time is now plus the timeout.
+    */
+#ifdef HAVE_CLOCK_GETTIME
+    clock_gettime(CLOCK_REALTIME, &ts_timeout);
+
+    /* Add our timeout to current time */
+    ts_timeout.tv_nsec += (timeout % 1000) * 1000000;
+    ts_timeout.tv_sec += timeout / 1000;
+#else
+    gettimeofday(&now, NULL);
+
+    /* Add our timeout to current time */
+    ts_timeout.tv_sec = now.tv_sec + (timeout / 1000);
+    ts_timeout.tv_nsec = (now.tv_usec + (timeout % 1000) * 1000) * 1000;
+#endif
+
+    /* Wrap the second if needed */
+    if (ts_timeout.tv_nsec > 1000000000) {
+        ts_timeout.tv_sec += 1;
+        ts_timeout.tv_nsec -= 1000000000;
+    }
+
+    /* Wait. */
+    do {
+        retval = sem_timedwait(&sem->sem, &ts_timeout);
+    } while (retval < 0 && errno == EINTR);
+
+    if (retval < 0) {
+        if (errno == ETIMEDOUT) {
+            retval = SDL_MUTEX_TIMEDOUT;
+        } else {
+            SDL_SetError("sem_timedwait returned an error: %s", strerror(errno));
+        }
+    }
+#else
+    end = SDL_GetTicks() + timeout;
+    while ((retval = SDL_SemTryWait(sem)) == SDL_MUTEX_TIMEDOUT) {
+        if (SDL_TICKS_PASSED(SDL_GetTicks(), end)) {
+            break;
+        }
+        SDL_Delay(1);
+    }
+#endif /* HAVE_SEM_TIMEDWAIT */
+
+    return retval;
+}
+
+Uint32
+SDL_SemValue(SDL_sem * sem)
+{
+    int ret = 0;
+    if (sem) {
+        sem_getvalue(&sem->sem, &ret);
+        if (ret < 0) {
+            ret = 0;
+        }
+    }
+    return (Uint32) ret;
+}
+
+int
+SDL_SemPost(SDL_sem * sem)
+{
+    int retval;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL semaphore");
+    }
+
+    retval = sem_post(&sem->sem);
+    if (retval < 0) {
+        SDL_SetError("sem_post() failed");
+    }
+    return retval;
+}
+
+#endif /* __MACOSX__ */
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_systhread.c

@@ -0,0 +1,247 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#include "../../SDL_internal.h"
+#include "SDL_system.h"
+
+#include <pthread.h>
+
+#if HAVE_PTHREAD_NP_H
+#include <pthread_np.h>
+#endif
+
+#include <signal.h>
+
+#ifdef __LINUX__
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include "../../core/linux/SDL_dbus.h"
+#endif /* __LINUX__ */
+
+#if defined(__LINUX__) || defined(__MACOSX__) || defined(__IPHONEOS__)
+#include <dlfcn.h>
+#ifndef RTLD_DEFAULT
+#define RTLD_DEFAULT NULL
+#endif
+#endif
+
+#include "SDL_log.h"
+#include "SDL_platform.h"
+#include "SDL_thread.h"
+#include "../SDL_thread_c.h"
+#include "../SDL_systhread.h"
+#ifdef __ANDROID__
+#include "../../core/android/SDL_android.h"
+#endif
+
+#ifdef __HAIKU__
+#include <kernel/OS.h>
+#endif
+
+#include "SDL_assert.h"
+
+#ifndef __NACL__
+/* List of signals to mask in the subthreads */
+static const int sig_list[] = {
+    SIGHUP, SIGINT, SIGQUIT, SIGPIPE, SIGALRM, SIGTERM, SIGCHLD, SIGWINCH,
+    SIGVTALRM, SIGPROF, 0
+};
+#endif
+
+static void *
+RunThread(void *data)
+{
+#ifdef __ANDROID__
+    Android_JNI_SetupThread();
+#endif
+    SDL_RunThread(data);
+    return NULL;
+}
+
+#if defined(__MACOSX__) || defined(__IPHONEOS__)
+static SDL_bool checked_setname = SDL_FALSE;
+static int (*ppthread_setname_np)(const char*) = NULL;
+#elif defined(__LINUX__)
+static SDL_bool checked_setname = SDL_FALSE;
+static int (*ppthread_setname_np)(pthread_t, const char*) = NULL;
+#endif
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args)
+{
+    pthread_attr_t type;
+
+    /* do this here before any threads exist, so there's no race condition. */
+    #if defined(__MACOSX__) || defined(__IPHONEOS__) || defined(__LINUX__)
+    if (!checked_setname) {
+        void *fn = dlsym(RTLD_DEFAULT, "pthread_setname_np");
+        #if defined(__MACOSX__) || defined(__IPHONEOS__)
+        ppthread_setname_np = (int(*)(const char*)) fn;
+        #elif defined(__LINUX__)
+        ppthread_setname_np = (int(*)(pthread_t, const char*)) fn;
+        #endif
+        checked_setname = SDL_TRUE;
+    }
+    #endif
+
+    /* Set the thread attributes */
+    if (pthread_attr_init(&type) != 0) {
+        return SDL_SetError("Couldn't initialize pthread attributes");
+    }
+    pthread_attr_setdetachstate(&type, PTHREAD_CREATE_JOINABLE);
+    
+    /* Set caller-requested stack size. Otherwise: use the system default. */
+    if (thread->stacksize) {
+        pthread_attr_setstacksize(&type, thread->stacksize);
+    }
+
+    /* Create the thread and go! */
+    if (pthread_create(&thread->handle, &type, RunThread, args) != 0) {
+        return SDL_SetError("Not enough resources to create thread");
+    }
+
+    return 0;
+}
+
+void
+SDL_SYS_SetupThread(const char *name)
+{
+#if !defined(__NACL__)
+    int i;
+    sigset_t mask;
+#endif /* !__NACL__ */
+
+    if (name != NULL) {
+        #if defined(__MACOSX__) || defined(__IPHONEOS__) || defined(__LINUX__)
+        SDL_assert(checked_setname);
+        if (ppthread_setname_np != NULL) {
+            #if defined(__MACOSX__) || defined(__IPHONEOS__)
+            ppthread_setname_np(name);
+            #elif defined(__LINUX__)
+            ppthread_setname_np(pthread_self(), name);
+            #endif
+        }
+        #elif HAVE_PTHREAD_SETNAME_NP
+            #if defined(__NETBSD__)
+            pthread_setname_np(pthread_self(), "%s", name);
+            #else
+            pthread_setname_np(pthread_self(), name);
+            #endif
+        #elif HAVE_PTHREAD_SET_NAME_NP
+            pthread_set_name_np(pthread_self(), name);
+        #elif defined(__HAIKU__)
+            /* The docs say the thread name can't be longer than B_OS_NAME_LENGTH. */
+            char namebuf[B_OS_NAME_LENGTH];
+            SDL_snprintf(namebuf, sizeof (namebuf), "%s", name);
+            namebuf[sizeof (namebuf) - 1] = '\0';
+            rename_thread(find_thread(NULL), namebuf);
+        #endif
+    }
+
+   /* NativeClient does not yet support signals.*/
+#if !defined(__NACL__)
+    /* Mask asynchronous signals for this thread */
+    sigemptyset(&mask);
+    for (i = 0; sig_list[i]; ++i) {
+        sigaddset(&mask, sig_list[i]);
+    }
+    pthread_sigmask(SIG_BLOCK, &mask, 0);
+#endif /* !__NACL__ */
+
+
+#ifdef PTHREAD_CANCEL_ASYNCHRONOUS
+    /* Allow ourselves to be asynchronously cancelled */
+    {
+        int oldstate;
+        pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, &oldstate);
+    }
+#endif
+}
+
+SDL_threadID
+SDL_ThreadID(void)
+{
+    return ((SDL_threadID) pthread_self());
+}
+
+int
+SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority)
+{
+#if __NACL__ || __RISCOS__
+    /* FIXME: Setting thread priority does not seem to be supported in NACL */
+    return 0;
+#elif __LINUX__
+    int value;
+    pid_t thread = syscall(SYS_gettid);
+
+    if (priority == SDL_THREAD_PRIORITY_LOW) {
+        value = 19;
+    } else if (priority == SDL_THREAD_PRIORITY_HIGH) {
+        value = -10;
+    } else if (priority == SDL_THREAD_PRIORITY_TIME_CRITICAL) {
+        value = -20;
+    } else {
+        value = 0;
+    }
+    return SDL_LinuxSetThreadPriority(thread, value);
+#else
+    struct sched_param sched;
+    int policy;
+    pthread_t thread = pthread_self();
+
+    if (pthread_getschedparam(thread, &policy, &sched) != 0) {
+        return SDL_SetError("pthread_getschedparam() failed");
+    }
+    if (priority == SDL_THREAD_PRIORITY_LOW) {
+        sched.sched_priority = sched_get_priority_min(policy);
+    } else if (priority == SDL_THREAD_PRIORITY_TIME_CRITICAL) {
+        sched.sched_priority = sched_get_priority_max(policy);
+    } else {
+        int min_priority = sched_get_priority_min(policy);
+        int max_priority = sched_get_priority_max(policy);
+        sched.sched_priority = (min_priority + (max_priority - min_priority) / 2);
+        if (priority == SDL_THREAD_PRIORITY_HIGH) {
+            sched.sched_priority += ((max_priority - min_priority) / 4);
+        }
+    }
+    if (pthread_setschedparam(thread, policy, &sched) != 0) {
+        return SDL_SetError("pthread_setschedparam() failed");
+    }
+    return 0;
+#endif /* linux */
+}
+
+void
+SDL_SYS_WaitThread(SDL_Thread * thread)
+{
+    pthread_join(thread->handle, 0);
+}
+
+void
+SDL_SYS_DetachThread(SDL_Thread * thread)
+{
+    pthread_detach(thread->handle);
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_systhread_c.h

@@ -0,0 +1,27 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#include <pthread.h>
+
+typedef pthread_t SYS_ThreadHandle;
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/pthread/SDL_systls.c

@@ -0,0 +1,70 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+#include "SDL_thread.h"
+#include "../SDL_systhread.h"
+#include "../SDL_thread_c.h"
+
+#include <pthread.h>
+
+
+#define INVALID_PTHREAD_KEY ((pthread_key_t)-1)
+
+static pthread_key_t thread_local_storage = INVALID_PTHREAD_KEY;
+static SDL_bool generic_local_storage = SDL_FALSE;
+
+SDL_TLSData *
+SDL_SYS_GetTLSData(void)
+{
+    if (thread_local_storage == INVALID_PTHREAD_KEY && !generic_local_storage) {
+        static SDL_SpinLock lock;
+        SDL_AtomicLock(&lock);
+        if (thread_local_storage == INVALID_PTHREAD_KEY && !generic_local_storage) {
+            pthread_key_t storage;
+            if (pthread_key_create(&storage, NULL) == 0) {
+                SDL_MemoryBarrierRelease();
+                thread_local_storage = storage;
+            } else {
+                generic_local_storage = SDL_TRUE;
+            }
+        }
+        SDL_AtomicUnlock(&lock);
+    }
+    if (generic_local_storage) {
+        return SDL_Generic_GetTLSData();
+    }
+    SDL_MemoryBarrierAcquire();
+    return (SDL_TLSData *)pthread_getspecific(thread_local_storage);
+}
+
+int
+SDL_SYS_SetTLSData(SDL_TLSData *data)
+{
+    if (generic_local_storage) {
+        return SDL_Generic_SetTLSData(data);
+    }
+    if (pthread_setspecific(thread_local_storage, data) != 0) {
+        return SDL_SetError("pthread_setspecific() failed");
+    }
+    return 0;
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/stdcpp/SDL_syscond.cpp

@@ -0,0 +1,164 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+extern "C" {
+#include "SDL_thread.h"
+}
+
+#include <chrono>
+#include <condition_variable>
+#include <ratio>
+#include <system_error>
+
+#include "SDL_sysmutex_c.h"
+
+struct SDL_cond
+{
+    std::condition_variable_any cpp_cond;
+};
+
+/* Create a condition variable */
+extern "C"
+SDL_cond *
+SDL_CreateCond(void)
+{
+    /* Allocate and initialize the condition variable */
+    try {
+        SDL_cond * cond = new SDL_cond;
+        return cond;
+    } catch (std::system_error & ex) {
+        SDL_SetError("unable to create a C++ condition variable: code=%d; %s", ex.code(), ex.what());
+        return NULL;
+    } catch (std::bad_alloc &) {
+        SDL_OutOfMemory();
+        return NULL;
+    }
+}
+
+/* Destroy a condition variable */
+extern "C"
+void
+SDL_DestroyCond(SDL_cond * cond)
+{
+    if (cond) {
+        delete cond;
+    }
+}
+
+/* Restart one of the threads that are waiting on the condition variable */
+extern "C"
+int
+SDL_CondSignal(SDL_cond * cond)
+{
+    if (!cond) {
+        SDL_SetError("Passed a NULL condition variable");
+        return -1;
+    }
+
+    cond->cpp_cond.notify_one();
+    return 0;
+}
+
+/* Restart all threads that are waiting on the condition variable */
+extern "C"
+int
+SDL_CondBroadcast(SDL_cond * cond)
+{
+    if (!cond) {
+        SDL_SetError("Passed a NULL condition variable");
+        return -1;
+    }
+
+    cond->cpp_cond.notify_all();
+    return 0;
+}
+
+/* Wait on the condition variable for at most 'ms' milliseconds.
+   The mutex must be locked before entering this function!
+   The mutex is unlocked during the wait, and locked again after the wait.
+
+Typical use:
+
+Thread A:
+    SDL_LockMutex(lock);
+    while ( ! condition ) {
+        SDL_CondWait(cond, lock);
+    }
+    SDL_UnlockMutex(lock);
+
+Thread B:
+    SDL_LockMutex(lock);
+    ...
+    condition = true;
+    ...
+    SDL_CondSignal(cond);
+    SDL_UnlockMutex(lock);
+ */
+extern "C"
+int
+SDL_CondWaitTimeout(SDL_cond * cond, SDL_mutex * mutex, Uint32 ms)
+{
+    if (!cond) {
+        SDL_SetError("Passed a NULL condition variable");
+        return -1;
+    }
+
+    if (!mutex) {
+        SDL_SetError("Passed a NULL mutex variable");
+        return -1;
+    }
+
+    try {
+        std::unique_lock<std::recursive_mutex> cpp_lock(mutex->cpp_mutex, std::adopt_lock_t());
+        if (ms == SDL_MUTEX_MAXWAIT) {
+            cond->cpp_cond.wait(
+                cpp_lock
+                );
+            cpp_lock.release();
+            return 0;
+        } else {
+            auto wait_result = cond->cpp_cond.wait_for(
+                cpp_lock,
+                std::chrono::duration<Uint32, std::milli>(ms)
+                );
+            cpp_lock.release();
+            if (wait_result == std::cv_status::timeout) {
+                return SDL_MUTEX_TIMEDOUT;
+            } else {
+                return 0;
+            }
+        }
+    } catch (std::system_error & ex) {
+        SDL_SetError("unable to wait on a C++ condition variable: code=%d; %s", ex.code(), ex.what());
+        return -1;
+    }
+}
+
+/* Wait on the condition variable forever */
+extern "C"
+int
+SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex)
+{
+    return SDL_CondWaitTimeout(cond, mutex, SDL_MUTEX_MAXWAIT);
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/stdcpp/SDL_sysmutex.cpp

@@ -0,0 +1,111 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+extern "C" {
+#include "SDL_thread.h"
+#include "SDL_systhread_c.h"
+#include "SDL_log.h"
+}
+
+#include <system_error>
+
+#include "SDL_sysmutex_c.h"
+#include <Windows.h>
+
+
+/* Create a mutex */
+extern "C"
+SDL_mutex *
+SDL_CreateMutex(void)
+{
+    /* Allocate and initialize the mutex */
+    try {
+        SDL_mutex * mutex = new SDL_mutex;
+        return mutex;
+    } catch (std::system_error & ex) {
+        SDL_SetError("unable to create a C++ mutex: code=%d; %s", ex.code(), ex.what());
+        return NULL;
+    } catch (std::bad_alloc &) {
+        SDL_OutOfMemory();
+        return NULL;
+    }
+}
+
+/* Free the mutex */
+extern "C"
+void
+SDL_DestroyMutex(SDL_mutex * mutex)
+{
+    if (mutex) {
+        delete mutex;
+    }
+}
+
+/* Lock the semaphore */
+extern "C"
+int
+SDL_mutexP(SDL_mutex * mutex)
+{
+    if (mutex == NULL) {
+        SDL_SetError("Passed a NULL mutex");
+        return -1;
+    }
+
+    try {
+        mutex->cpp_mutex.lock();
+        return 0;
+    } catch (std::system_error & ex) {
+        SDL_SetError("unable to lock a C++ mutex: code=%d; %s", ex.code(), ex.what());
+        return -1;
+    }
+}
+
+/* TryLock the mutex */
+int
+SDL_TryLockMutex(SDL_mutex * mutex)
+{
+    int retval = 0;
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    if (mutex->cpp_mutex.try_lock() == false) {
+        retval = SDL_MUTEX_TIMEDOUT;
+    }
+    return retval;
+}
+
+/* Unlock the mutex */
+extern "C"
+int
+SDL_mutexV(SDL_mutex * mutex)
+{
+    if (mutex == NULL) {
+        SDL_SetError("Passed a NULL mutex");
+        return -1;
+    }
+
+    mutex->cpp_mutex.unlock();
+    return 0;
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/stdcpp/SDL_sysmutex_c.h

@@ -0,0 +1,30 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "SDL_config.h"
+
+#include <mutex>
+
+struct SDL_mutex
+{
+    std::recursive_mutex cpp_mutex;
+};
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/stdcpp/SDL_systhread.cpp

@@ -0,0 +1,179 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+/* Thread management routines for SDL */
+
+extern "C" {
+#include "SDL_thread.h"
+#include "../SDL_thread_c.h"
+#include "../SDL_systhread.h"
+#include "SDL_log.h"
+}
+
+#include <mutex>
+#include <thread>
+#include <system_error>
+
+#ifdef __WINRT__
+#include <Windows.h>
+#endif
+
+static void
+RunThread(void *args)
+{
+    SDL_RunThread(args);
+}
+
+extern "C"
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args)
+{
+    try {
+        // !!! FIXME: no way to set a thread stack size here.
+        std::thread cpp_thread(RunThread, args);
+        thread->handle = (void *) new std::thread(std::move(cpp_thread));
+        return 0;
+    } catch (std::system_error & ex) {
+        SDL_SetError("unable to start a C++ thread: code=%d; %s", ex.code(), ex.what());
+        return -1;
+    } catch (std::bad_alloc &) {
+        SDL_OutOfMemory();
+        return -1;
+    }
+}
+
+extern "C"
+void
+SDL_SYS_SetupThread(const char *name)
+{
+    // Make sure a thread ID gets assigned ASAP, for debugging purposes:
+    SDL_ThreadID();
+    return;
+}
+
+extern "C"
+SDL_threadID
+SDL_ThreadID(void)
+{
+#ifdef __WINRT__
+    return GetCurrentThreadId();
+#else
+    // HACK: Mimick a thread ID, if one isn't otherwise available.
+    static thread_local SDL_threadID current_thread_id = 0;
+    static SDL_threadID next_thread_id = 1;
+    static std::mutex next_thread_id_mutex;
+
+    if (current_thread_id == 0) {
+        std::lock_guard<std::mutex> lock(next_thread_id_mutex);
+        current_thread_id = next_thread_id;
+        ++next_thread_id;
+    }
+
+    return current_thread_id;
+#endif
+}
+
+extern "C"
+int
+SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority)
+{
+#ifdef __WINRT__
+    int value;
+
+    if (priority == SDL_THREAD_PRIORITY_LOW) {
+        value = THREAD_PRIORITY_LOWEST;
+    }
+    else if (priority == SDL_THREAD_PRIORITY_HIGH) {
+        value = THREAD_PRIORITY_HIGHEST;
+    }
+    else if (priority == SDL_THREAD_PRIORITY_TIME_CRITICAL) {
+        // FIXME: WinRT does not support TIME_CRITICAL! -flibit
+        SDL_LogWarn(SDL_LOG_CATEGORY_SYSTEM, "TIME_CRITICAL unsupported, falling back to HIGHEST");
+        value = THREAD_PRIORITY_HIGHEST;
+    }
+    else {
+        value = THREAD_PRIORITY_NORMAL;
+    }
+    if (!SetThreadPriority(GetCurrentThread(), value)) {
+        return WIN_SetError("SetThreadPriority()");
+    }
+    return 0;
+#else
+    return SDL_Unsupported();
+#endif
+}
+
+extern "C"
+void
+SDL_SYS_WaitThread(SDL_Thread * thread)
+{
+    if ( ! thread) {
+        return;
+    }
+
+    try {
+        std::thread * cpp_thread = (std::thread *) thread->handle;
+        if (cpp_thread->joinable()) {
+            cpp_thread->join();
+        }
+    } catch (std::system_error &) {
+        // An error occurred when joining the thread.  SDL_WaitThread does not,
+        // however, seem to provide a means to report errors to its callers
+        // though!
+    }
+}
+
+extern "C"
+void
+SDL_SYS_DetachThread(SDL_Thread * thread)
+{
+    if ( ! thread) {
+        return;
+    }
+
+    try {
+        std::thread * cpp_thread = (std::thread *) thread->handle;
+        if (cpp_thread->joinable()) {
+            cpp_thread->detach();
+        }
+    } catch (std::system_error &) {
+        // An error occurred when detaching the thread.  SDL_DetachThread does not,
+        // however, seem to provide a means to report errors to its callers
+        // though!
+    }
+}
+
+extern "C"
+SDL_TLSData *
+SDL_SYS_GetTLSData(void)
+{
+    return SDL_Generic_GetTLSData();
+}
+
+extern "C"
+int
+SDL_SYS_SetTLSData(SDL_TLSData *data)
+{
+    return SDL_Generic_SetTLSData(data);
+}
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/stdcpp/SDL_systhread_c.h

@@ -0,0 +1,26 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "SDL_config.h"
+
+/* For a thread handle, use a void pointer to a std::thread */
+typedef void * SYS_ThreadHandle;
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/windows/SDL_sysmutex.c

@@ -0,0 +1,110 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_WINDOWS
+
+/* Mutex functions using the Win32 API */
+
+#include "../../core/windows/SDL_windows.h"
+
+#include "SDL_mutex.h"
+
+
+struct SDL_mutex
+{
+    CRITICAL_SECTION cs;
+};
+
+/* Create a mutex */
+SDL_mutex *
+SDL_CreateMutex(void)
+{
+    SDL_mutex *mutex;
+
+    /* Allocate mutex memory */
+    mutex = (SDL_mutex *) SDL_malloc(sizeof(*mutex));
+    if (mutex) {
+        /* Initialize */
+        /* On SMP systems, a non-zero spin count generally helps performance */
+#if __WINRT__
+        InitializeCriticalSectionEx(&mutex->cs, 2000, 0);
+#else
+        InitializeCriticalSectionAndSpinCount(&mutex->cs, 2000);
+#endif
+    } else {
+        SDL_OutOfMemory();
+    }
+    return (mutex);
+}
+
+/* Free the mutex */
+void
+SDL_DestroyMutex(SDL_mutex * mutex)
+{
+    if (mutex) {
+        DeleteCriticalSection(&mutex->cs);
+        SDL_free(mutex);
+    }
+}
+
+/* Lock the mutex */
+int
+SDL_LockMutex(SDL_mutex * mutex)
+{
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    EnterCriticalSection(&mutex->cs);
+    return (0);
+}
+
+/* TryLock the mutex */
+int
+SDL_TryLockMutex(SDL_mutex * mutex)
+{
+    int retval = 0;
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    if (TryEnterCriticalSection(&mutex->cs) == 0) {
+        retval = SDL_MUTEX_TIMEDOUT;
+    }
+    return retval;
+}
+
+/* Unlock the mutex */
+int
+SDL_UnlockMutex(SDL_mutex * mutex)
+{
+    if (mutex == NULL) {
+        return SDL_SetError("Passed a NULL mutex");
+    }
+
+    LeaveCriticalSection(&mutex->cs);
+    return (0);
+}
+
+#endif /* SDL_THREAD_WINDOWS */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/windows/SDL_syssem.c

@@ -0,0 +1,152 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_WINDOWS
+
+/* Semaphore functions using the Win32 API */
+
+#include "../../core/windows/SDL_windows.h"
+
+#include "SDL_thread.h"
+
+struct SDL_semaphore
+{
+    HANDLE id;
+    LONG count;
+};
+
+
+/* Create a semaphore */
+SDL_sem *
+SDL_CreateSemaphore(Uint32 initial_value)
+{
+    SDL_sem *sem;
+
+    /* Allocate sem memory */
+    sem = (SDL_sem *) SDL_malloc(sizeof(*sem));
+    if (sem) {
+        /* Create the semaphore, with max value 32K */
+#if __WINRT__
+        sem->id = CreateSemaphoreEx(NULL, initial_value, 32 * 1024, NULL, 0, SEMAPHORE_ALL_ACCESS);
+#else
+        sem->id = CreateSemaphore(NULL, initial_value, 32 * 1024, NULL);
+#endif
+        sem->count = initial_value;
+        if (!sem->id) {
+            SDL_SetError("Couldn't create semaphore");
+            SDL_free(sem);
+            sem = NULL;
+        }
+    } else {
+        SDL_OutOfMemory();
+    }
+    return (sem);
+}
+
+/* Free the semaphore */
+void
+SDL_DestroySemaphore(SDL_sem * sem)
+{
+    if (sem) {
+        if (sem->id) {
+            CloseHandle(sem->id);
+            sem->id = 0;
+        }
+        SDL_free(sem);
+    }
+}
+
+int
+SDL_SemWaitTimeout(SDL_sem * sem, Uint32 timeout)
+{
+    int retval;
+    DWORD dwMilliseconds;
+
+    if (!sem) {
+        return SDL_SetError("Passed a NULL sem");
+    }
+
+    if (timeout == SDL_MUTEX_MAXWAIT) {
+        dwMilliseconds = INFINITE;
+    } else {
+        dwMilliseconds = (DWORD) timeout;
+    }
+    switch (WaitForSingleObjectEx(sem->id, dwMilliseconds, FALSE)) {
+    case WAIT_OBJECT_0:
+        InterlockedDecrement(&sem->count);
+        retval = 0;
+        break;
+    case WAIT_TIMEOUT:
+        retval = SDL_MUTEX_TIMEDOUT;
+        break;
+    default:
+        retval = SDL_SetError("WaitForSingleObject() failed");
+        break;
+    }
+    return retval;
+}
+
+int
+SDL_SemTryWait(SDL_sem * sem)
+{
+    return SDL_SemWaitTimeout(sem, 0);
+}
+
+int
+SDL_SemWait(SDL_sem * sem)
+{
+    return SDL_SemWaitTimeout(sem, SDL_MUTEX_MAXWAIT);
+}
+
+/* Returns the current count of the semaphore */
+Uint32
+SDL_SemValue(SDL_sem * sem)
+{
+    if (!sem) {
+        SDL_SetError("Passed a NULL sem");
+        return 0;
+    }
+    return (Uint32)sem->count;
+}
+
+int
+SDL_SemPost(SDL_sem * sem)
+{
+    if (!sem) {
+        return SDL_SetError("Passed a NULL sem");
+    }
+    /* Increase the counter in the first place, because
+     * after a successful release the semaphore may
+     * immediately get destroyed by another thread which
+     * is waiting for this semaphore.
+     */
+    InterlockedIncrement(&sem->count);
+    if (ReleaseSemaphore(sem->id, 1, NULL) == FALSE) {
+        InterlockedDecrement(&sem->count);      /* restore */
+        return SDL_SetError("ReleaseSemaphore() failed");
+    }
+    return 0;
+}
+
+#endif /* SDL_THREAD_WINDOWS */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/windows/SDL_systhread.c

@@ -0,0 +1,260 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_WINDOWS
+
+/* Win32 thread management routines for SDL */
+
+#include "SDL_hints.h"
+#include "SDL_thread.h"
+#include "../SDL_thread_c.h"
+#include "../SDL_systhread.h"
+#include "SDL_systhread_c.h"
+
+#ifndef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+/* We'll use the C library from this DLL */
+#include <process.h>
+
+#ifndef STACK_SIZE_PARAM_IS_A_RESERVATION
+#define STACK_SIZE_PARAM_IS_A_RESERVATION 0x00010000
+#endif
+
+/* Cygwin gcc-3 ... MingW64 (even with a i386 host) does this like MSVC. */
+#if (defined(__MINGW32__) && (__GNUC__ < 4))
+typedef unsigned long (__cdecl *pfnSDL_CurrentBeginThread) (void *, unsigned,
+        unsigned (__stdcall *func)(void *), void *arg,
+        unsigned, unsigned *threadID);
+typedef void (__cdecl *pfnSDL_CurrentEndThread)(unsigned code);
+
+#elif defined(__WATCOMC__)
+/* This is for Watcom targets except OS2 */
+#if __WATCOMC__ < 1240
+#define __watcall
+#endif
+typedef unsigned long (__watcall * pfnSDL_CurrentBeginThread) (void *,
+                                                               unsigned,
+                                                               unsigned
+                                                               (__stdcall *
+                                                                func) (void
+                                                                       *),
+                                                               void *arg,
+                                                               unsigned,
+                                                               unsigned
+                                                               *threadID);
+typedef void (__watcall * pfnSDL_CurrentEndThread) (unsigned code);
+
+#else
+typedef uintptr_t(__cdecl * pfnSDL_CurrentBeginThread) (void *, unsigned,
+                                                        unsigned (__stdcall *
+                                                                  func) (void
+                                                                         *),
+                                                        void *arg, unsigned,
+                                                        unsigned *threadID);
+typedef void (__cdecl * pfnSDL_CurrentEndThread) (unsigned code);
+#endif
+#endif /* !SDL_PASSED_BEGINTHREAD_ENDTHREAD */
+
+
+typedef struct ThreadStartParms
+{
+    void *args;
+    pfnSDL_CurrentEndThread pfnCurrentEndThread;
+} tThreadStartParms, *pThreadStartParms;
+
+static DWORD
+RunThread(void *data)
+{
+    pThreadStartParms pThreadParms = (pThreadStartParms) data;
+    pfnSDL_CurrentEndThread pfnEndThread = pThreadParms->pfnCurrentEndThread;
+    void *args = pThreadParms->args;
+    SDL_free(pThreadParms);
+    SDL_RunThread(args);
+    if (pfnEndThread != NULL)
+        pfnEndThread(0);
+    return (0);
+}
+
+static DWORD WINAPI
+RunThreadViaCreateThread(LPVOID data)
+{
+  return RunThread(data);
+}
+
+static unsigned __stdcall
+RunThreadViaBeginThreadEx(void *data)
+{
+  return (unsigned) RunThread(data);
+}
+
+#ifdef SDL_PASSED_BEGINTHREAD_ENDTHREAD
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args,
+                     pfnSDL_CurrentBeginThread pfnBeginThread,
+                     pfnSDL_CurrentEndThread pfnEndThread)
+{
+#elif defined(__CYGWIN__) || defined(__WINRT__)
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args)
+{
+    pfnSDL_CurrentBeginThread pfnBeginThread = NULL;
+    pfnSDL_CurrentEndThread pfnEndThread = NULL;
+#else
+int
+SDL_SYS_CreateThread(SDL_Thread * thread, void *args)
+{
+    pfnSDL_CurrentBeginThread pfnBeginThread = (pfnSDL_CurrentBeginThread)_beginthreadex;
+    pfnSDL_CurrentEndThread pfnEndThread = (pfnSDL_CurrentEndThread)_endthreadex;
+#endif /* SDL_PASSED_BEGINTHREAD_ENDTHREAD */
+    pThreadStartParms pThreadParms =
+        (pThreadStartParms) SDL_malloc(sizeof(tThreadStartParms));
+    const DWORD flags = thread->stacksize ? STACK_SIZE_PARAM_IS_A_RESERVATION : 0;
+    if (!pThreadParms) {
+        return SDL_OutOfMemory();
+    }
+    /* Save the function which we will have to call to clear the RTL of calling app! */
+    pThreadParms->pfnCurrentEndThread = pfnEndThread;
+    /* Also save the real parameters we have to pass to thread function */
+    pThreadParms->args = args;
+
+    /* thread->stacksize == 0 means "system default", same as win32 expects */
+    if (pfnBeginThread) {
+        unsigned threadid = 0;
+        thread->handle = (SYS_ThreadHandle)
+            ((size_t) pfnBeginThread(NULL, (unsigned int) thread->stacksize,
+                                     RunThreadViaBeginThreadEx,
+                                     pThreadParms, flags, &threadid));
+    } else {
+        DWORD threadid = 0;
+        thread->handle = CreateThread(NULL, thread->stacksize,
+                                      RunThreadViaCreateThread,
+                                      pThreadParms, flags, &threadid);
+    }
+    if (thread->handle == NULL) {
+        return SDL_SetError("Not enough resources to create thread");
+    }
+    return 0;
+}
+
+#pragma pack(push,8)
+typedef struct tagTHREADNAME_INFO
+{
+    DWORD dwType; /* must be 0x1000 */
+    LPCSTR szName; /* pointer to name (in user addr space) */
+    DWORD dwThreadID; /* thread ID (-1=caller thread) */
+    DWORD dwFlags; /* reserved for future use, must be zero */
+} THREADNAME_INFO;
+#pragma pack(pop)
+
+
+typedef HRESULT (WINAPI *pfnSetThreadDescription)(HANDLE, PCWSTR);
+
+void
+SDL_SYS_SetupThread(const char *name)
+{
+    if (name != NULL) {
+        #ifndef __WINRT__   /* !!! FIXME: There's no LoadLibrary() in WinRT; don't know if SetThreadDescription is available there at all at the moment. */
+        static pfnSetThreadDescription pSetThreadDescription = NULL;
+        static HMODULE kernel32 = 0;
+
+        if (!kernel32) {
+            kernel32 = LoadLibraryW(L"kernel32.dll");
+            if (kernel32) {
+                pSetThreadDescription = (pfnSetThreadDescription) GetProcAddress(kernel32, "SetThreadDescription");
+            }
+        }
+
+        if (pSetThreadDescription != NULL) {
+            WCHAR *strw = WIN_UTF8ToString(name);
+            if (strw) {
+                pSetThreadDescription(GetCurrentThread(), strw);
+                SDL_free(strw);
+            }
+        }
+        #endif
+
+        /* Presumably some version of Visual Studio will understand SetThreadDescription(),
+           but we still need to deal with older OSes and debuggers. Set it with the arcane
+           exception magic, too. */
+
+        if (IsDebuggerPresent()) {
+            THREADNAME_INFO inf;
+
+            /* C# and friends will try to catch this Exception, let's avoid it. */
+            if (SDL_GetHintBoolean(SDL_HINT_WINDOWS_DISABLE_THREAD_NAMING, SDL_TRUE)) {
+                return;
+            }
+
+            /* This magic tells the debugger to name a thread if it's listening. */
+            SDL_zero(inf);
+            inf.dwType = 0x1000;
+            inf.szName = name;
+            inf.dwThreadID = (DWORD) -1;
+            inf.dwFlags = 0;
+
+            /* The debugger catches this, renames the thread, continues on. */
+            RaiseException(0x406D1388, 0, sizeof(inf) / sizeof(ULONG), (const ULONG_PTR*) &inf);
+        }
+    }
+}
+
+SDL_threadID
+SDL_ThreadID(void)
+{
+    return ((SDL_threadID) GetCurrentThreadId());
+}
+
+int
+SDL_SYS_SetThreadPriority(SDL_ThreadPriority priority)
+{
+    int value;
+
+    if (priority == SDL_THREAD_PRIORITY_LOW) {
+        value = THREAD_PRIORITY_LOWEST;
+    } else if (priority == SDL_THREAD_PRIORITY_HIGH) {
+        value = THREAD_PRIORITY_HIGHEST;
+    } else if (priority == SDL_THREAD_PRIORITY_TIME_CRITICAL) {
+        value = THREAD_PRIORITY_TIME_CRITICAL;
+    } else {
+        value = THREAD_PRIORITY_NORMAL;
+    }
+    if (!SetThreadPriority(GetCurrentThread(), value)) {
+        return WIN_SetError("SetThreadPriority()");
+    }
+    return 0;
+}
+
+void
+SDL_SYS_WaitThread(SDL_Thread * thread)
+{
+    WaitForSingleObjectEx(thread->handle, INFINITE, FALSE);
+    CloseHandle(thread->handle);
+}
+
+void
+SDL_SYS_DetachThread(SDL_Thread * thread)
+{
+    CloseHandle(thread->handle);
+}
+
+#endif /* SDL_THREAD_WINDOWS */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/windows/SDL_systhread_c.h

@@ -0,0 +1,32 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+#include "../../SDL_internal.h"
+
+#ifndef SDL_systhread_c_h_
+#define SDL_systhread_c_h_
+
+#include "../../core/windows/SDL_windows.h"
+
+typedef HANDLE SYS_ThreadHandle;
+
+#endif /* SDL_systhread_c_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

externals/SDL/src/thread/windows/SDL_systls.c

@@ -0,0 +1,84 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#include "../../SDL_internal.h"
+
+#if SDL_THREAD_WINDOWS
+
+#include "../../core/windows/SDL_windows.h"
+
+#include "SDL_thread.h"
+#include "../SDL_thread_c.h"
+
+#if WINAPI_FAMILY_WINRT
+#include <fibersapi.h>
+
+#ifndef TLS_OUT_OF_INDEXES
+#define TLS_OUT_OF_INDEXES  FLS_OUT_OF_INDEXES
+#endif
+
+#define TlsAlloc()  FlsAlloc(NULL)
+#define TlsSetValue FlsSetValue
+#define TlsGetValue FlsGetValue
+#endif
+
+static DWORD thread_local_storage = TLS_OUT_OF_INDEXES;
+static SDL_bool generic_local_storage = SDL_FALSE;
+
+SDL_TLSData *
+SDL_SYS_GetTLSData(void)
+{
+    if (thread_local_storage == TLS_OUT_OF_INDEXES && !generic_local_storage) {
+        static SDL_SpinLock lock;
+        SDL_AtomicLock(&lock);
+        if (thread_local_storage == TLS_OUT_OF_INDEXES && !generic_local_storage) {
+            DWORD storage = TlsAlloc();
+            if (storage != TLS_OUT_OF_INDEXES) {
+                SDL_MemoryBarrierRelease();
+                thread_local_storage = storage;
+            } else {
+                generic_local_storage = SDL_TRUE;
+            }
+        }
+        SDL_AtomicUnlock(&lock);
+    }
+    if (generic_local_storage) {
+        return SDL_Generic_GetTLSData();
+    }
+    SDL_MemoryBarrierAcquire();
+    return (SDL_TLSData *)TlsGetValue(thread_local_storage);
+}
+
+int
+SDL_SYS_SetTLSData(SDL_TLSData *data)
+{
+    if (generic_local_storage) {
+        return SDL_Generic_SetTLSData(data);
+    }
+    if (!TlsSetValue(thread_local_storage, data)) {
+        return SDL_SetError("TlsSetValue() failed");
+    }
+    return 0;
+}
+
+#endif /* SDL_THREAD_WINDOWS */
+
+/* vi: set ts=4 sw=4 expandtab: */