hdkv/yuzu
1
Fork 0
Code Issues Pull Requests Releases 1 Activity

early-access version 1503

Browse Source
This commit is contained in:
pineappleEA
2021-03-06 01:41:47 +01:00
parent a37fdd48d5
commit 3fd627d0ba
558 changed files with 55823 additions and 15727 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
externals/mbedtls/include/CMakeLists.txt vendored
View File

@@ -11,6 +11,6 @@ if(INSTALL_MBEDTLS_HEADERS)
endif(INSTALL_MBEDTLS_HEADERS)
# Make config.h available in an out-of-source build. ssl-opt.sh requires it.
if (NOT ${CMAKE_CURRENT_BINARY_DIR} STREQUAL ${CMAKE_CURRENT_SOURCE_DIR})
if (ENABLE_TESTING AND NOT ${CMAKE_CURRENT_BINARY_DIR} STREQUAL ${CMAKE_CURRENT_SOURCE_DIR})
link_to_source(mbedtls)
endif()

110
externals/mbedtls/include/mbedtls/aes.h vendored
View File

@@ -20,8 +20,32 @@
* <https://ieeexplore.ieee.org/servlet/opac?punumber=4375278>.
*/
/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
* SPDX-License-Identifier: GPL-2.0
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,7 +61,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_AES_H
@@ -62,7 +86,11 @@
/* Error codes in range 0x0021-0x0025 */
#define MBEDTLS_ERR_AES_BAD_INPUT_DATA -0x0021 /**< Invalid input data. */
/* MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE is deprecated and should not be used. */
#define MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE -0x0023 /**< Feature not available. For example, an unsupported AES key size. */
/* MBEDTLS_ERR_AES_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_AES_HW_ACCEL_FAILED -0x0025 /**< AES hardware accelerator failed. */
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
@@ -81,7 +109,7 @@ extern "C" {
/**
* \brief The AES context-type definition.
*/
typedef struct
typedef struct mbedtls_aes_context
{
int nr; /*!< The number of rounds. */
uint32_t *rk; /*!< AES round keys. */
@@ -100,7 +128,7 @@ mbedtls_aes_context;
/**
* \brief The AES XTS context-type definition.
*/
typedef struct
typedef struct mbedtls_aes_xts_context
{
mbedtls_aes_context crypt; /*!< The AES context to use for AES block
encryption or decryption. */
@@ -119,7 +147,7 @@ typedef struct
* It must be the first API called before using
* the context.
*
* \param ctx The AES context to initialize.
* \param ctx The AES context to initialize. This must not be \c NULL.
*/
void mbedtls_aes_init( mbedtls_aes_context *ctx );
@@ -127,6 +155,8 @@ void mbedtls_aes_init( mbedtls_aes_context *ctx );
* \brief This function releases and clears the specified AES context.
*
* \param ctx The AES context to clear.
* If this is \c NULL, this function does nothing.
* Otherwise, the context must have been at least initialized.
*/
void mbedtls_aes_free( mbedtls_aes_context *ctx );
@@ -137,7 +167,7 @@ void mbedtls_aes_free( mbedtls_aes_context *ctx );
* It must be the first API called before using
* the context.
*
* \param ctx The AES XTS context to initialize.
* \param ctx The AES XTS context to initialize. This must not be \c NULL.
*/
void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx );
@@ -145,6 +175,8 @@ void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx );
* \brief This function releases and clears the specified AES XTS context.
*
* \param ctx The AES XTS context to clear.
* If this is \c NULL, this function does nothing.
* Otherwise, the context must have been at least initialized.
*/
void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx );
#endif /* MBEDTLS_CIPHER_MODE_XTS */
@@ -153,7 +185,9 @@ void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx );
* \brief This function sets the encryption key.
*
* \param ctx The AES context to which the key should be bound.
* It must be initialized.
* \param key The encryption key.
* This must be a readable buffer of size \p keybits bits.
* \param keybits The size of data passed in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
@@ -169,7 +203,9 @@ int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key,
* \brief This function sets the decryption key.
*
* \param ctx The AES context to which the key should be bound.
* It must be initialized.
* \param key The decryption key.
* This must be a readable buffer of size \p keybits bits.
* \param keybits The size of data passed. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
@@ -187,8 +223,10 @@ int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
* sets the encryption key.
*
* \param ctx The AES XTS context to which the key should be bound.
* It must be initialized.
* \param key The encryption key. This is comprised of the XTS key1
* concatenated with the XTS key2.
* This must be a readable buffer of size \p keybits bits.
* \param keybits The size of \p key passed in bits. Valid options are:
* <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
* <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
@@ -205,8 +243,10 @@ int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx,
* sets the decryption key.
*
* \param ctx The AES XTS context to which the key should be bound.
* It must be initialized.
* \param key The decryption key. This is comprised of the XTS key1
* concatenated with the XTS key2.
* This must be a readable buffer of size \p keybits bits.
* \param keybits The size of \p key passed in bits. Valid options are:
* <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
* <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
@@ -232,10 +272,13 @@ int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx,
* call to this API with the same context.
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
* \param input The 16-Byte buffer holding the input data.
* \param output The 16-Byte buffer holding the output data.
* \param input The buffer holding the input data.
* It must be readable and at least \c 16 Bytes long.
* \param output The buffer where the output data will be written.
* It must be writeable and at least \c 16 Bytes long.
* \return \c 0 on success.
*/
@@ -258,8 +301,8 @@ int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
* mbedtls_aes_setkey_enc() or mbedtls_aes_setkey_dec() must be called
* before the first call to this API with the same context.
*
* \note This function operates on aligned blocks, that is, the input size
* must be a multiple of the AES block size of 16 Bytes.
* \note This function operates on full blocks, that is, the input size
* must be a multiple of the AES block size of \c 16 Bytes.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the same function again on the next
@@ -270,13 +313,17 @@ int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
*
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
* \param length The length of the input data in Bytes. This must be a
* multiple of the block size (16 Bytes).
* multiple of the block size (\c 16 Bytes).
* \param iv Initialization vector (updated after use).
* It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
@@ -304,9 +351,10 @@ int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
* returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH.
*
* \param ctx The AES XTS context to use for AES XTS operations.
* It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
* \param length The length of a data unit in bytes. This can be any
* \param length The length of a data unit in Bytes. This can be any
* length between 16 bytes and 2^24 bytes inclusive
* (between 1 and 2^20 block cipher blocks).
* \param data_unit The address of the data unit encoded as an array of 16
@@ -314,15 +362,15 @@ int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
* is typically the index of the block device sector that
* contains the data.
* \param input The buffer holding the input data (which is an entire
* data unit). This function reads \p length bytes from \p
* data unit). This function reads \p length Bytes from \p
* input.
* \param output The buffer holding the output data (which is an entire
* data unit). This function writes \p length bytes to \p
* data unit). This function writes \p length Bytes to \p
* output.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is
* smaller than an AES block in size (16 bytes) or if \p
* smaller than an AES block in size (16 Bytes) or if \p
* length is larger than 2^20 blocks (16 MiB).
*/
int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
@@ -358,13 +406,18 @@ int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
*
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT.
* \param length The length of the input data.
* \param length The length of the input data in Bytes.
* \param iv_off The offset in IV (updated after use).
* It must point to a valid \c size_t.
* \param iv The initialization vector (updated after use).
* It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -399,12 +452,16 @@ int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx,
*
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or
* #MBEDTLS_AES_DECRYPT
* \param length The length of the input data.
* \param iv The initialization vector (updated after use).
* It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -449,11 +506,16 @@ int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
* will compromise security.
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param length The length of the input data.
* \param iv_off The offset in IV (updated after use).
* It must point to a valid \c size_t.
* \param iv The initialization vector (updated after use).
* It must be a readable and writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -525,15 +587,21 @@ int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx,
* securely discarded as soon as it's no longer needed.
*
* \param ctx The AES context to use for encryption or decryption.
* It must be initialized and bound to a key.
* \param length The length of the input data.
* \param nc_off The offset in the current \p stream_block, for
* resuming within the current cipher stream. The
* offset pointer should be 0 at the start of a stream.
* It must point to a valid \c size_t.
* \param nonce_counter The 128-bit nonce and counter.
* It must be a readable-writeable buffer of \c 16 Bytes.
* \param stream_block The saved stream block for resuming. This is
* overwritten by the function.
* It must be a readable-writeable buffer of \c 16 Bytes.
* \param input The buffer holding the input data.
* It must be readable and of size \p length Bytes.
* \param output The buffer holding the output data.
* It must be writeable and of size \p length Bytes.
*
* \return \c 0 on success.
*/
@@ -586,7 +654,7 @@ int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx,
* \brief Deprecated internal AES block encryption function
* without return value.
*
* \deprecated Superseded by mbedtls_aes_encrypt_ext() in 2.5.0.
* \deprecated Superseded by mbedtls_internal_aes_encrypt()
*
* \param ctx The AES context to use for encryption.
* \param input Plaintext block.
@@ -600,7 +668,7 @@ MBEDTLS_DEPRECATED void mbedtls_aes_encrypt( mbedtls_aes_context *ctx,
* \brief Deprecated internal AES block decryption function
* without return value.
*
* \deprecated Superseded by mbedtls_aes_decrypt_ext() in 2.5.0.
* \deprecated Superseded by mbedtls_internal_aes_decrypt()
*
* \param ctx The AES context to use for decryption.
* \param input Ciphertext block.
@@ -613,6 +681,8 @@ MBEDTLS_DEPRECATED void mbedtls_aes_decrypt( mbedtls_aes_context *ctx,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine.
*
@@ -621,6 +691,8 @@ MBEDTLS_DEPRECATED void mbedtls_aes_decrypt( mbedtls_aes_context *ctx,
*/
int mbedtls_aes_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

81
externals/mbedtls/include/mbedtls/aesni.h vendored
View File

@@ -2,10 +2,36 @@
* \file aesni.h
*
* \brief AES-NI for hardware AES acceleration on some Intel processors
*
* \warning These functions are only for internal use by other library
* functions; you must not call them directly.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +47,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_AESNI_H
#define MBEDTLS_AESNI_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "aes.h"
#define MBEDTLS_AESNI_AES 0x02000000u
@@ -44,7 +76,10 @@ extern "C" {
#endif
/**
* \brief AES-NI features detection routine
* \brief Internal function to detect the AES-NI feature in CPUs.
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param what The feature to detect
* (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL)
@@ -54,7 +89,10 @@ extern "C" {
int mbedtls_aesni_has_support( unsigned int what );
/**
* \brief AES-NI AES-ECB block en(de)cryption
* \brief Internal AES-NI AES-ECB block encryption and decryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -64,12 +102,15 @@ int mbedtls_aesni_has_support( unsigned int what );
* \return 0 on success (cannot fail)
*/
int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
int mode,
const unsigned char input[16],
unsigned char output[16] );
/**
* \brief GCM multiplication: c = a * b in GF(2^128)
* \brief Internal GCM multiplication: c = a * b in GF(2^128)
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param c Result
* \param a First operand
@@ -79,21 +120,29 @@ int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
* elements of GF(2^128) as per the GCM spec.
*/
void mbedtls_aesni_gcm_mult( unsigned char c[16],
const unsigned char a[16],
const unsigned char b[16] );
const unsigned char a[16],
const unsigned char b[16] );
/**
* \brief Compute decryption round keys from encryption round keys
* \brief Internal round key inversion. This function computes
* decryption round keys from the encryption round keys.
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param invkey Round keys for the equivalent inverse cipher
* \param fwdkey Original round keys (for encryption)
* \param nr Number of rounds (that is, number of round keys minus one)
*/
void mbedtls_aesni_inverse_key( unsigned char *invkey,
const unsigned char *fwdkey, int nr );
const unsigned char *fwdkey,
int nr );
/**
* \brief Perform key expansion (for encryption)
* \brief Internal key expansion for encryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param rk Destination buffer where the round keys are written
* \param key Encryption key
@@ -102,8 +151,8 @@ void mbedtls_aesni_inverse_key( unsigned char *invkey,
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aesni_setkey_enc( unsigned char *rk,
const unsigned char *key,
size_t bits );
const unsigned char *key,
size_t bits );
#ifdef __cplusplus
}

36
externals/mbedtls/include/mbedtls/arc4.h vendored
View File

@@ -7,8 +7,31 @@
* security risk. We recommend considering stronger ciphers instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,7 +47,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*
*/
#ifndef MBEDTLS_ARC4_H
@@ -38,6 +61,7 @@
#include <stddef.h>
/* MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED -0x0019 /**< ARC4 hardware accelerator failed. */
#ifdef __cplusplus
@@ -55,7 +79,7 @@ extern "C" {
* security risk. We recommend considering stronger ciphers instead.
*
*/
typedef struct
typedef struct mbedtls_arc4_context
{
int x; /*!< permutation index */
int y; /*!< permutation index */
@@ -124,6 +148,8 @@ void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key,
int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned char *input,
unsigned char *output );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -136,6 +162,8 @@ int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned
*/
int mbedtls_arc4_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

133
externals/mbedtls/include/mbedtls/aria.h vendored
View File

@@ -9,8 +9,32 @@
* Korean, but see http://210.104.33.10/ARIA/index-e.html in English)
* and also described by the IETF in <em>RFC 5794</em>.
*/
/* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,7 +50,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ARIA_H
@@ -41,6 +65,8 @@
#include <stddef.h>
#include <stdint.h>
#include "platform_util.h"
#define MBEDTLS_ARIA_ENCRYPT 1 /**< ARIA encryption. */
#define MBEDTLS_ARIA_DECRYPT 0 /**< ARIA decryption. */
@@ -48,9 +74,18 @@
#define MBEDTLS_ARIA_MAX_ROUNDS 16 /**< Maxiumum number of rounds in ARIA. */
#define MBEDTLS_ARIA_MAX_KEYSIZE 32 /**< Maximum size of an ARIA key in bytes. */
#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH -0x005C /**< Invalid key length. */
#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x005C )
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#define MBEDTLS_ERR_ARIA_BAD_INPUT_DATA -0x005C /**< Bad input data. */
#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */
/* MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE is deprecated and should not be used.
*/
#define MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE -0x005A /**< Feature not available. For example, an unsupported ARIA key size. */
/* MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED -0x0058 /**< ARIA hardware accelerator failed. */
#if !defined(MBEDTLS_ARIA_ALT)
@@ -64,7 +99,7 @@ extern "C" {
/**
* \brief The ARIA context-type definition.
*/
typedef struct
typedef struct mbedtls_aria_context
{
unsigned char nr; /*!< The number of rounds (12, 14 or 16) */
/*! The ARIA round keys. */
@@ -82,14 +117,16 @@ mbedtls_aria_context;
* It must be the first API called before using
* the context.
*
* \param ctx The ARIA context to initialize.
* \param ctx The ARIA context to initialize. This must not be \c NULL.
*/
void mbedtls_aria_init( mbedtls_aria_context *ctx );
/**
* \brief This function releases and clears the specified ARIA context.
*
* \param ctx The ARIA context to clear.
* \param ctx The ARIA context to clear. This may be \c NULL, in which
* case this function returns immediately. If it is not \c NULL,
* it must point to an initialized ARIA context.
*/
void mbedtls_aria_free( mbedtls_aria_context *ctx );
@@ -97,14 +134,16 @@ void mbedtls_aria_free( mbedtls_aria_context *ctx );
* \brief This function sets the encryption key.
*
* \param ctx The ARIA context to which the key should be bound.
* \param key The encryption key.
* \param keybits The size of data passed in bits. Valid options are:
* This must be initialized.
* \param key The encryption key. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The size of \p key in Bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
* \return \c 0 on success or #MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH
* on failure.
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_setkey_enc( mbedtls_aria_context *ctx,
const unsigned char *key,
@@ -114,13 +153,16 @@ int mbedtls_aria_setkey_enc( mbedtls_aria_context *ctx,
* \brief This function sets the decryption key.
*
* \param ctx The ARIA context to which the key should be bound.
* \param key The decryption key.
* This must be initialized.
* \param key The decryption key. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The size of data passed. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
* <li>256 bits</li></ul>
*
* \return \c 0 on success, or #MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH on failure.
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_setkey_dec( mbedtls_aria_context *ctx,
const unsigned char *key,
@@ -139,10 +181,12 @@ int mbedtls_aria_setkey_dec( mbedtls_aria_context *ctx,
* call to this API with the same context.
*
* \param ctx The ARIA context to use for encryption or decryption.
* This must be initialized and bound to a key.
* \param input The 16-Byte buffer holding the input data.
* \param output The 16-Byte buffer holding the output data.
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_crypt_ecb( mbedtls_aria_context *ctx,
const unsigned char input[MBEDTLS_ARIA_BLOCKSIZE],
@@ -174,16 +218,21 @@ int mbedtls_aria_crypt_ecb( mbedtls_aria_context *ctx,
*
*
* \param ctx The ARIA context to use for encryption or decryption.
* \param mode The ARIA operation: #MBEDTLS_ARIA_ENCRYPT or
* #MBEDTLS_ARIA_DECRYPT.
* This must be initialized and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_ARIA_ENCRYPT for encryption, or
* #MBEDTLS_ARIA_DECRYPT for decryption.
* \param length The length of the input data in Bytes. This must be a
* multiple of the block size (16 Bytes).
* \param iv Initialization vector (updated after use).
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* This must be a readable buffer of size 16 Bytes.
* \param input The buffer holding the input data. This must
* be a readable buffer of length \p length Bytes.
* \param output The buffer holding the output data. This must
* be a writable buffer of length \p length Bytes.
*
* \return \c 0 on success, or #MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH
* on failure.
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_crypt_cbc( mbedtls_aria_context *ctx,
int mode,
@@ -218,15 +267,22 @@ int mbedtls_aria_crypt_cbc( mbedtls_aria_context *ctx,
*
*
* \param ctx The ARIA context to use for encryption or decryption.
* \param mode The ARIA operation: #MBEDTLS_ARIA_ENCRYPT or
* #MBEDTLS_ARIA_DECRYPT.
* \param length The length of the input data.
* This must be initialized and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_ARIA_ENCRYPT for encryption, or
* #MBEDTLS_ARIA_DECRYPT for decryption.
* \param length The length of the input data \p input in Bytes.
* \param iv_off The offset in IV (updated after use).
* This must not be larger than 15.
* \param iv The initialization vector (updated after use).
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* This must be a readable buffer of size 16 Bytes.
* \param input The buffer holding the input data. This must
* be a readable buffer of length \p length Bytes.
* \param output The buffer holding the output data. This must
* be a writable buffer of length \p length Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_crypt_cfb128( mbedtls_aria_context *ctx,
int mode,
@@ -296,17 +352,24 @@ int mbedtls_aria_crypt_cfb128( mbedtls_aria_context *ctx,
* securely discarded as soon as it's no longer needed.
*
* \param ctx The ARIA context to use for encryption or decryption.
* \param length The length of the input data.
* \param nc_off The offset in the current \p stream_block, for
* resuming within the current cipher stream. The
* offset pointer should be 0 at the start of a stream.
* \param nonce_counter The 128-bit nonce and counter.
* \param stream_block The saved stream block for resuming. This is
* overwritten by the function.
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* This must be initialized and bound to a key.
* \param length The length of the input data \p input in Bytes.
* \param nc_off The offset in Bytes in the current \p stream_block,
* for resuming within the current cipher stream. The
* offset pointer should be \c 0 at the start of a
* stream. This must not be larger than \c 15 Bytes.
* \param nonce_counter The 128-bit nonce and counter. This must point to
* a read/write buffer of length \c 16 bytes.
* \param stream_block The saved stream block for resuming. This must
* point to a read/write buffer of length \c 16 bytes.
* This is overwritten by the function.
* \param input The buffer holding the input data. This must
* be a readable buffer of length \p length Bytes.
* \param output The buffer holding the output data. This must
* be a writable buffer of length \p length Bytes.
*
* \return \c 0 on success.
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_aria_crypt_ctr( mbedtls_aria_context *ctx,
size_t length,

29
externals/mbedtls/include/mbedtls/asn1.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Generic ASN.1 parsing
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ASN1_H
#define MBEDTLS_ASN1_H

346
externals/mbedtls/include/mbedtls/asn1write.h vendored
View File

@@ -4,8 +4,31 @@
* \brief ASN.1 buffer writing functionality
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,198 +44,286 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ASN1_WRITE_H
#define MBEDTLS_ASN1_WRITE_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "asn1.h"
#define MBEDTLS_ASN1_CHK_ADD(g, f) do { if( ( ret = f ) < 0 ) return( ret ); else \
g += ret; } while( 0 )
#define MBEDTLS_ASN1_CHK_ADD(g, f) \
do \
{ \
if( ( ret = (f) ) < 0 ) \
return( ret ); \
else \
(g) += ret; \
} while( 0 )
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Write a length field in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a length field in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param len the length to write
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param len The length value to write.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_len( unsigned char **p, unsigned char *start, size_t len );
int mbedtls_asn1_write_len( unsigned char **p, unsigned char *start,
size_t len );
/**
* \brief Write a ASN.1 tag in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write an ASN.1 tag in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param tag the tag to write
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param tag The tag to write.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_tag( unsigned char **p, unsigned char *start,
unsigned char tag );
unsigned char tag );
/**
* \brief Write raw buffer data
* Note: function works backwards in data buffer
* \brief Write raw buffer data.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf data buffer to write
* \param size length of the data buffer
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param buf The data buffer to write.
* \param size The length of the data buffer.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_raw_buffer( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t size );
const unsigned char *buf, size_t size );
#if defined(MBEDTLS_BIGNUM_C)
/**
* \brief Write a big number (MBEDTLS_ASN1_INTEGER) in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a arbitrary-precision number (#MBEDTLS_ASN1_INTEGER)
* in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param X the MPI to write
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param X The MPI to write.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_mpi( unsigned char **p, unsigned char *start, const mbedtls_mpi *X );
int mbedtls_asn1_write_mpi( unsigned char **p, unsigned char *start,
const mbedtls_mpi *X );
#endif /* MBEDTLS_BIGNUM_C */
/**
* \brief Write a NULL tag (MBEDTLS_ASN1_NULL) with zero data in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a NULL tag (#MBEDTLS_ASN1_NULL) with zero data
* in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_null( unsigned char **p, unsigned char *start );
/**
* \brief Write an OID tag (MBEDTLS_ASN1_OID) and data in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write an OID tag (#MBEDTLS_ASN1_OID) and data
* in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param oid the OID to write
* \param oid_len length of the OID
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param oid The OID to write.
* \param oid_len The length of the OID.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_oid( unsigned char **p, unsigned char *start,
const char *oid, size_t oid_len );
const char *oid, size_t oid_len );
/**
* \brief Write an AlgorithmIdentifier sequence in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write an AlgorithmIdentifier sequence in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param oid the OID of the algorithm
* \param oid_len length of the OID
* \param par_len length of parameters, which must be already written.
* \note This function works backwards in data buffer.
*
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param oid The OID of the algorithm to write.
* \param oid_len The length of the algorithm's OID.
* \param par_len The length of the parameters, which must be already written.
* If 0, NULL parameters are added
*
* \return the length written or a negative error code
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_algorithm_identifier( unsigned char **p, unsigned char *start,
const char *oid, size_t oid_len,
size_t par_len );
int mbedtls_asn1_write_algorithm_identifier( unsigned char **p,
unsigned char *start,
const char *oid, size_t oid_len,
size_t par_len );
/**
* \brief Write a boolean tag (MBEDTLS_ASN1_BOOLEAN) and value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a boolean tag (#MBEDTLS_ASN1_BOOLEAN) and value
* in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param boolean 0 or 1
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param boolean The boolean value to write, either \c 0 or \c 1.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_bool( unsigned char **p, unsigned char *start, int boolean );
int mbedtls_asn1_write_bool( unsigned char **p, unsigned char *start,
int boolean );
/**
* \brief Write an int tag (MBEDTLS_ASN1_INTEGER) and value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write an int tag (#MBEDTLS_ASN1_INTEGER) and value
* in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param val the integer value
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param val The integer value to write.
*
* \return The number of bytes written to \p p on success.
* \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_asn1_write_int( unsigned char **p, unsigned char *start, int val );
/**
* \brief Write a printable string tag (MBEDTLS_ASN1_PRINTABLE_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a string in ASN.1 format using a specific
* string encoding tag.
* \note This function works backwards in data buffer.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param text the text to write
* \param text_len length of the text
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param tag The string encoding tag to write, e.g.
* #MBEDTLS_ASN1_UTF8_STRING.
* \param text The string to write.
* \param text_len The length of \p text in bytes (which might
* be strictly larger than the number of characters).
*
* \return the length written or a negative error code
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_printable_string( unsigned char **p, unsigned char *start,
const char *text, size_t text_len );
int mbedtls_asn1_write_tagged_string( unsigned char **p, unsigned char *start,
int tag, const char *text,
size_t text_len );
/**
* \brief Write an IA5 string tag (MBEDTLS_ASN1_IA5_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a string in ASN.1 format using the PrintableString
* string encoding tag (#MBEDTLS_ASN1_PRINTABLE_STRING).
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param text the text to write
* \param text_len length of the text
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param text The string to write.
* \param text_len The length of \p text in bytes (which might
* be strictly larger than the number of characters).
*
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_printable_string( unsigned char **p,
unsigned char *start,
const char *text, size_t text_len );
/**
* \brief Write a UTF8 string in ASN.1 format using the UTF8String
* string encoding tag (#MBEDTLS_ASN1_PRINTABLE_STRING).
*
* \note This function works backwards in data buffer.
*
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param text The string to write.
* \param text_len The length of \p text in bytes (which might
* be strictly larger than the number of characters).
*
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_utf8_string( unsigned char **p, unsigned char *start,
const char *text, size_t text_len );
/**
* \brief Write a string in ASN.1 format using the IA5String
* string encoding tag (#MBEDTLS_ASN1_IA5_STRING).
*
* \note This function works backwards in data buffer.
*
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param text The string to write.
* \param text_len The length of \p text in bytes (which might
* be strictly larger than the number of characters).
*
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_ia5_string( unsigned char **p, unsigned char *start,
const char *text, size_t text_len );
const char *text, size_t text_len );
/**
* \brief Write a bitstring tag (MBEDTLS_ASN1_BIT_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write a bitstring tag (#MBEDTLS_ASN1_BIT_STRING) and
* value in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf the bitstring
* \param bits the total number of bits in the bitstring
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param buf The bitstring to write.
* \param bits The total number of bits in the bitstring.
*
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_bitstring( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t bits );
const unsigned char *buf, size_t bits );
/**
* \brief Write an octet string tag (MBEDTLS_ASN1_OCTET_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
* \brief Write an octet string tag (#MBEDTLS_ASN1_OCTET_STRING)
* and value in ASN.1 format.
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf data buffer to write
* \param size length of the data buffer
* \note This function works backwards in data buffer.
*
* \return the length written or a negative error code
* \param p The reference to the current position pointer.
* \param start The start of the buffer, for bounds-checking.
* \param buf The buffer holding the data to write.
* \param size The length of the data buffer \p buf.
*
* \return The number of bytes written to \p p on success.
* \return A negative error code on failure.
*/
int mbedtls_asn1_write_octet_string( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t size );
const unsigned char *buf, size_t size );
/**
* \brief Create or find a specific named_data entry for writing in a
@@ -220,15 +331,16 @@ int mbedtls_asn1_write_octet_string( unsigned char **p, unsigned char *start,
* a new entry is added to the head of the list.
* Warning: Destructive behaviour for the val data!
*
* \param list Pointer to the location of the head of the list to seek
* through (will be updated in case of a new entry)
* \param oid The OID to look for
* \param oid_len Size of the OID
* \param val Data to store (can be NULL if you want to fill it by hand)
* \param val_len Minimum length of the data buffer needed
* \param list The pointer to the location of the head of the list to seek
* through (will be updated in case of a new entry).
* \param oid The OID to look for.
* \param oid_len The size of the OID.
* \param val The data to store (can be \c NULL if you want to fill
* it by hand).
* \param val_len The minimum length of the data buffer needed.
*
* \return NULL if if there was a memory allocation error, or a pointer
* to the new / existing entry.
* \return A pointer to the new / existing entry on success.
* \return \c NULL if if there was a memory allocation error.
*/
mbedtls_asn1_named_data *mbedtls_asn1_store_named_data( mbedtls_asn1_named_data **list,
const char *oid, size_t oid_len,

38
externals/mbedtls/include/mbedtls/base64.h vendored
View File

@@ -4,8 +4,31 @@
* \brief RFC 1521 base64 encoding/decoding
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_BASE64_H
#define MBEDTLS_BASE64_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#define MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL -0x002A /**< Output buffer too small. */
@@ -77,6 +106,7 @@ int mbedtls_base64_encode( unsigned char *dst, size_t dlen, size_t *olen,
int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen,
const unsigned char *src, size_t slen );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -84,6 +114,8 @@ int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen,
*/
int mbedtls_base64_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

853
externals/mbedtls/include/mbedtls/bignum.h vendored
View File

File diff suppressed because it is too large Load Diff

170
externals/mbedtls/include/mbedtls/blowfish.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Blowfish block cipher
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_BLOWFISH_H
#define MBEDTLS_BLOWFISH_H
@@ -35,6 +58,8 @@
#include <stddef.h>
#include <stdint.h>
#include "platform_util.h"
#define MBEDTLS_BLOWFISH_ENCRYPT 1
#define MBEDTLS_BLOWFISH_DECRYPT 0
#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
@@ -42,9 +67,16 @@
#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */
#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 )
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 /**< Bad input data. */
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
/* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 /**< Blowfish hardware accelerator failed. */
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
#ifdef __cplusplus
extern "C" {
@@ -57,7 +89,7 @@ extern "C" {
/**
* \brief Blowfish context structure
*/
typedef struct
typedef struct mbedtls_blowfish_context
{
uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */
uint32_t S[4][256]; /*!< key dependent S-boxes */
@@ -69,40 +101,53 @@ mbedtls_blowfish_context;
#endif /* MBEDTLS_BLOWFISH_ALT */
/**
* \brief Initialize Blowfish context
* \brief Initialize a Blowfish context.
*
* \param ctx Blowfish context to be initialized
* \param ctx The Blowfish context to be initialized.
* This must not be \c NULL.
*/
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
/**
* \brief Clear Blowfish context
* \brief Clear a Blowfish context.
*
* \param ctx Blowfish context to be cleared
* \param ctx The Blowfish context to be cleared.
* This may be \c NULL, in which case this function
* returns immediately. If it is not \c NULL, it must
* point to an initialized Blowfish context.
*/
void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
/**
* \brief Blowfish key schedule
* \brief Perform a Blowfish key schedule operation.
*
* \param ctx Blowfish context to be initialized
* \param key encryption key
* \param keybits must be between 32 and 448 bits
* \param ctx The Blowfish context to perform the key schedule on.
* \param key The encryption key. This must be a readable buffer of
* length \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be between
* \c 32 and \c 448 and a multiple of \c 8.
*
* \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief Blowfish-ECB block encryption/decryption
* \brief Perform a Blowfish-ECB block encryption/decryption operation.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param input 8-byte input block
* \param output 8-byte output block
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param input The input block. This must be a readable buffer
* of size \c 8 Bytes.
* \param output The output block. This must be a writable buffer
* of size \c 8 Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
int mode,
@@ -111,9 +156,7 @@ int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief Blowfish-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (8 bytes)
* \brief Perform a Blowfish-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -123,15 +166,22 @@ int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param length The length of the input data in Bytes. This must be
* multiple of \c 8.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 8 Bytes. It is updated by this function.
* \param input The input data. This must be a readable buffer of length
* \p length Bytes.
* \param output The output data. This must be a writable buffer of length
* \p length Bytes.
*
* \return 0 if successful, or
* MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
int mode,
@@ -143,7 +193,7 @@ int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief Blowfish CFB buffer encryption/decryption.
* \brief Perform a Blowfish CFB buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -153,15 +203,25 @@ int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param length The length of the input data in Bytes.
* \param iv_off The offset in the initialiation vector.
* The value pointed to must be smaller than \c 8 Bytes.
* It is updated by this function to support the aforementioned
* streaming usage.
* \param iv The initialization vector. This must be a read/write buffer
* of size \c 8 Bytes. It is updated after use.
* \param input The input data. This must be a readable buffer of length
* \p length Bytes.
* \param output The output data. This must be a writable buffer of length
* \p length Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
int mode,
@@ -174,7 +234,7 @@ int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief Blowfish-CTR buffer encryption/decryption
* \brief Perform a Blowfish-CTR buffer encryption/decryption operation.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
@@ -217,18 +277,24 @@ int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
* \param ctx Blowfish context
* \param length The length of the data
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param length The length of the input data in Bytes.
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 64-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
* within current cipher stream). The offset pointer
* should be \c 0 at the start of a stream and must be
* smaller than \c 8. It is updated by this function.
* \param nonce_counter The 64-bit nonce and counter. This must point to a
* read/write buffer of length \c 8 Bytes.
* \param stream_block The saved stream-block for resuming. This must point to
* a read/write buffer of length \c 8 Bytes.
* \param input The input data. This must be a readable buffer of
* length \p length Bytes.
* \param output The output data. This must be a writable buffer of
* length \p length Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
size_t length,

82
externals/mbedtls/include/mbedtls/bn_mul.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Multi-precision integer library
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
/*
* Multiply source vector [s] with b, add result
@@ -40,6 +63,12 @@
#ifndef MBEDTLS_BN_MUL_H
#define MBEDTLS_BN_MUL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "bignum.h"
#if defined(MBEDTLS_HAVE_ASM)
@@ -172,19 +201,19 @@
#define MULADDC_INIT \
asm( \
"xorq %%r8, %%r8 \n\t"
"xorq %%r8, %%r8\n"
#define MULADDC_CORE \
"movq (%%rsi), %%rax \n\t" \
"mulq %%rbx \n\t" \
"addq $8, %%rsi \n\t" \
"addq %%rcx, %%rax \n\t" \
"movq %%r8, %%rcx \n\t" \
"adcq $0, %%rdx \n\t" \
"nop \n\t" \
"addq %%rax, (%%rdi) \n\t" \
"adcq %%rdx, %%rcx \n\t" \
"addq $8, %%rdi \n\t"
"movq (%%rsi), %%rax\n" \
"mulq %%rbx\n" \
"addq $8, %%rsi\n" \
"addq %%rcx, %%rax\n" \
"movq %%r8, %%rcx\n" \
"adcq $0, %%rdx\n" \
"nop \n" \
"addq %%rax, (%%rdi)\n" \
"adcq %%rdx, %%rcx\n" \
"addq $8, %%rdi\n"
#define MULADDC_STOP \
: "+c" (c), "+D" (d), "+S" (s) \
@@ -567,9 +596,8 @@
#endif /* TriCore */
/*
* gcc -O0 by default uses r7 for the frame pointer, so it complains about our
* use of r7 below, unless -fomit-frame-pointer is passed. Unfortunately,
* passing that option is not easy when building with yotta.
* Note, gcc -O0 by default uses r7 for the frame pointer, so it complains about
* our use of r7 below, unless -fomit-frame-pointer is passed.
*
* On the other hand, -fomit-frame-pointer is implied by any -Ox options with
* x !=0, which we can detect using __OPTIMIZE__ (which is also defined by
@@ -639,6 +667,24 @@
"r6", "r7", "r8", "r9", "cc" \
);
#elif (__ARM_ARCH >= 6) && \
defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)
#define MULADDC_INIT \
asm(
#define MULADDC_CORE \
"ldr r0, [%0], #4 \n\t" \
"ldr r1, [%1] \n\t" \
"umaal r1, %2, %3, r0 \n\t" \
"str r1, [%1], #4 \n\t"
#define MULADDC_STOP \
: "=r" (s), "=r" (d), "=r" (c) \
: "r" (b), "0" (s), "1" (d), "2" (c) \
: "r0", "r1", "memory" \
);
#else
#define MULADDC_INIT \
@@ -736,7 +782,7 @@
"sw $10, %2 \n\t" \
: "=m" (c), "=m" (d), "=m" (s) \
: "m" (s), "m" (d), "m" (c), "m" (b) \
: "$9", "$10", "$11", "$12", "$13", "$14", "$15" \
: "$9", "$10", "$11", "$12", "$13", "$14", "$15", "lo", "hi" \
);
#endif /* MIPS */

242
externals/mbedtls/include/mbedtls/camellia.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Camellia block cipher
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CAMELLIA_H
#define MBEDTLS_CAMELLIA_H
@@ -35,11 +58,20 @@
#include <stddef.h>
#include <stdint.h>
#include "platform_util.h"
#define MBEDTLS_CAMELLIA_ENCRYPT 1
#define MBEDTLS_CAMELLIA_DECRYPT 0
#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH -0x0024 /**< Invalid key length. */
#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 )
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */
#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
/* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED -0x0027 /**< Camellia hardware accelerator failed. */
#ifdef __cplusplus
@@ -53,7 +85,7 @@ extern "C" {
/**
* \brief CAMELLIA context structure
*/
typedef struct
typedef struct mbedtls_camellia_context
{
int nr; /*!< number of rounds */
uint32_t rk[68]; /*!< CAMELLIA round keys */
@@ -65,52 +97,68 @@ mbedtls_camellia_context;
#endif /* MBEDTLS_CAMELLIA_ALT */
/**
* \brief Initialize CAMELLIA context
* \brief Initialize a CAMELLIA context.
*
* \param ctx CAMELLIA context to be initialized
* \param ctx The CAMELLIA context to be initialized.
* This must not be \c NULL.
*/
void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
/**
* \brief Clear CAMELLIA context
* \brief Clear a CAMELLIA context.
*
* \param ctx CAMELLIA context to be cleared
* \param ctx The CAMELLIA context to be cleared. This may be \c NULL,
* in which case this function returns immediately. If it is not
* \c NULL, it must be initialized.
*/
void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
/**
* \brief CAMELLIA key schedule (encryption)
* \brief Perform a CAMELLIA key schedule operation for encryption.
*
* \param ctx CAMELLIA context to be initialized
* \param key encryption key
* \param keybits must be 128, 192 or 256
* \param ctx The CAMELLIA context to use. This must be initialized.
* \param key The encryption key to use. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be either \c 128,
* \c 192 or \c 256.
*
* \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
unsigned int keybits );
int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief CAMELLIA key schedule (decryption)
* \brief Perform a CAMELLIA key schedule operation for decryption.
*
* \param ctx CAMELLIA context to be initialized
* \param key decryption key
* \param keybits must be 128, 192 or 256
* \param ctx The CAMELLIA context to use. This must be initialized.
* \param key The decryption key. This must be a readable buffer
* of size \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be either \c 128,
* \c 192 or \c 256.
*
* \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
unsigned int keybits );
int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx,
const unsigned char *key,
unsigned int keybits );
/**
* \brief CAMELLIA-ECB block encryption/decryption
* \brief Perform a CAMELLIA-ECB block encryption/decryption operation.
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param input 16-byte input block
* \param output 16-byte output block
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param input The input block. This must be a readable buffer
* of size \c 16 Bytes.
* \param output The output block. This must be a writable buffer
* of size \c 16 Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
int mode,
@@ -119,9 +167,7 @@ int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief CAMELLIA-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (16 bytes)
* \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -131,15 +177,22 @@ int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param length The length in Bytes of the input data \p input.
* This must be a multiple of \c 16 Bytes.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 16 Bytes. It is updated to allow streaming
* use as explained above.
* \param input The buffer holding the input data. This must point to a
* readable buffer of length \p length Bytes.
* \param output The buffer holding the output data. This must point to a
* writable buffer of length \p length Bytes.
*
* \return 0 if successful, or
* MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
int mode,
@@ -151,11 +204,14 @@ int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief CAMELLIA-CFB128 buffer encryption/decryption
* \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption
* operation.
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
* \note Due to the nature of CFB mode, you should use the same
* key for both encryption and decryption. In particular, calls
* to this function should be preceded by a key-schedule via
* mbedtls_camellia_setkey_enc() regardless of whether \p mode
* is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -165,16 +221,24 @@ int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. This must be either
* #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
* \param length The length of the input data \p input. Any value is allowed.
* \param iv_off The current offset in the IV. This must be smaller
* than \c 16 Bytes. It is updated after this call to allow
* the aforementioned streaming usage.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 16 Bytes. It is updated after this call to
* allow the aforementioned streaming usage.
* \param input The buffer holding the input data. This must be a readable
* buffer of size \p length Bytes.
* \param output The buffer to hold the output data. This must be a writable
* buffer of length \p length Bytes.
*
* \return 0 if successful, or
* MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
int mode,
@@ -187,11 +251,13 @@ int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief CAMELLIA-CTR buffer encryption/decryption
* \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation.
*
* Note: Due to the nature of CTR you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
* *note Due to the nature of CTR mode, you should use the same
* key for both encryption and decryption. In particular, calls
* to this function should be preceded by a key-schedule via
* mbedtls_camellia_setkey_enc() regardless of whether \p mode
* is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
@@ -214,41 +280,49 @@ int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
* per-message nonce, handled by yourself, and the second one
* updated by this function internally.
*
* For example, you might reserve the first 12 bytes for the
* per-message nonce, and the last 4 bytes for internal use. In that
* case, before calling this function on a new message you need to
* set the first 12 bytes of \p nonce_counter to your chosen nonce
* value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
* stream_block to be ignored). That way, you can encrypt at most
* 2**96 messages of up to 2**32 blocks each with the same key.
* For example, you might reserve the first \c 12 Bytes for the
* per-message nonce, and the last \c 4 Bytes for internal use.
* In that case, before calling this function on a new message you
* need to set the first \c 12 Bytes of \p nonce_counter to your
* chosen nonce value, the last four to \c 0, and \p nc_off to \c 0
* (which will cause \p stream_block to be ignored). That way, you
* can encrypt at most \c 2**96 messages of up to \c 2**32 blocks
* each with the same key.
*
* The per-message nonce (or information sufficient to reconstruct
* it) needs to be communicated with the ciphertext and must be unique.
* The recommended way to ensure uniqueness is to use a message
* counter. An alternative is to generate random nonces, but this
* limits the number of messages that can be securely encrypted:
* for example, with 96-bit random nonces, you should not encrypt
* more than 2**32 messages with the same key.
* it) needs to be communicated with the ciphertext and must be
* unique. The recommended way to ensure uniqueness is to use a
* message counter. An alternative is to generate random nonces,
* but this limits the number of messages that can be securely
* encrypted: for example, with 96-bit random nonces, you should
* not encrypt more than 2**32 messages with the same key.
*
* Note that for both stategies, sizes are measured in blocks and
* that a CAMELLIA block is 16 bytes.
* that a CAMELLIA block is \c 16 Bytes.
*
* \warning Upon return, \p stream_block contains sensitive data. Its
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
* \param ctx CAMELLIA context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* \param ctx The CAMELLIA context to use. This must be initialized
* and bound to a key.
* \param length The length of the input data \p input in Bytes.
* Any value is allowed.
* \param nc_off The offset in the current \p stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 128-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
* should be \c 0 at the start of a stream. It is updated
* at the end of this call.
* \param nonce_counter The 128-bit nonce and counter. This must be a read/write
* buffer of length \c 16 Bytes.
* \param stream_block The saved stream-block for resuming. This must be a
* read/write buffer of length \c 16 Bytes.
* \param input The input data stream. This must be a readable buffer of
* size \p length Bytes.
* \param output The output data stream. This must be a writable buffer
* of size \p length Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
size_t length,
@@ -259,6 +333,8 @@ int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -266,6 +342,8 @@ int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
*/
int mbedtls_camellia_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

150
externals/mbedtls/include/mbedtls/ccm.h vendored
View File

@@ -28,8 +28,31 @@
* consistent with RFC 3610.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,18 +68,25 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CCM_H
#define MBEDTLS_CCM_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#define MBEDTLS_ERR_CCM_BAD_INPUT -0x000D /**< Bad input parameters to the function. */
#define MBEDTLS_ERR_CCM_AUTH_FAILED -0x000F /**< Authenticated decryption failed. */
#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */
/* MBEDTLS_ERR_CCM_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */
#ifdef __cplusplus
extern "C" {
@@ -70,7 +100,8 @@ extern "C" {
* \brief The CCM context-type definition. The CCM context is passed
* to the APIs called.
*/
typedef struct {
typedef struct mbedtls_ccm_context
{
mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */
}
mbedtls_ccm_context;
@@ -84,7 +115,7 @@ mbedtls_ccm_context;
* to make references valid, and prepare the context
* for mbedtls_ccm_setkey() or mbedtls_ccm_free().
*
* \param ctx The CCM context to initialize.
* \param ctx The CCM context to initialize. This must not be \c NULL.
*/
void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
@@ -92,9 +123,10 @@ void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
* \brief This function initializes the CCM context set in the
* \p ctx parameter and sets the encryption key.
*
* \param ctx The CCM context to initialize.
* \param ctx The CCM context to initialize. This must be an initialized
* context.
* \param cipher The 128-bit block cipher to use.
* \param key The encryption key.
* \param key The encryption key. This must not be \c NULL.
* \param keybits The key size in bits. This must be acceptable by the cipher.
*
* \return \c 0 on success.
@@ -109,7 +141,8 @@ int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx,
* \brief This function releases and clears the specified CCM context
* and underlying cipher sub-context.
*
* \param ctx The CCM context to clear.
* \param ctx The CCM context to clear. If this is \c NULL, the function
* has no effect. Otherwise, this must be initialized.
*/
void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
@@ -122,19 +155,27 @@ void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
* \p tag = \p output + \p length, and make sure that the
* output buffer is at least \p length + \p tag_len wide.
*
* \param ctx The CCM context to use for encryption.
* \param ctx The CCM context to use for encryption. This must be
* initialized and bound to a key.
* \param length The length of the input data in Bytes.
* \param iv Initialization vector (nonce).
* \param iv The initialization vector (nonce). This must be a readable
* buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
* \param add The additional data field.
* \param add The additional data field. If \p add_len is greater than
* zero, \p add must be a readable buffer of at least that
* length.
* \param add_len The length of additional data in Bytes.
* Must be less than 2^16 - 2^8.
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* Must be at least \p length Bytes wide.
* \param tag The buffer holding the authentication field.
* This must be less than `2^16 - 2^8`.
* \param input The buffer holding the input data. If \p length is greater
* than zero, \p input must be a readable buffer of at least
* that length.
* \param output The buffer holding the output data. If \p length is greater
* than zero, \p output must be a writable buffer of at least
* that length.
* \param tag The buffer holding the authentication field. This must be a
* writable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field to generate in Bytes:
* 4, 6, 8, 10, 12, 14 or 16.
*
@@ -160,23 +201,30 @@ int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
* the tag length has to be encoded into the \p iv passed to
* this function.
*
* \param ctx The CCM context to use for encryption.
* \param ctx The CCM context to use for encryption. This must be
* initialized and bound to a key.
* \param length The length of the input data in Bytes.
* \param iv Initialization vector (nonce).
* \param iv The initialization vector (nonce). This must be a readable
* buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
* \param add The additional data field.
* \param add The additional data field. This must be a readable buffer of
* at least \p add_len Bytes.
* \param add_len The length of additional data in Bytes.
* Must be less than 2^16 - 2^8.
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* Must be at least \p length Bytes wide.
* \param tag The buffer holding the authentication field.
* This must be less than 2^16 - 2^8.
* \param input The buffer holding the input data. If \p length is greater
* than zero, \p input must be a readable buffer of at least
* that length.
* \param output The buffer holding the output data. If \p length is greater
* than zero, \p output must be a writable buffer of at least
* that length.
* \param tag The buffer holding the authentication field. This must be a
* writable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field to generate in Bytes:
* 0, 4, 6, 8, 10, 12, 14 or 16.
*
* \warning Passing 0 as \p tag_len means that the message is no
* \warning Passing \c 0 as \p tag_len means that the message is no
* longer authenticated.
*
* \return \c 0 on success.
@@ -192,20 +240,27 @@ int mbedtls_ccm_star_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
* \brief This function performs a CCM authenticated decryption of a
* buffer.
*
* \param ctx The CCM context to use for decryption.
* \param ctx The CCM context to use for decryption. This must be
* initialized and bound to a key.
* \param length The length of the input data in Bytes.
* \param iv Initialization vector (nonce).
* \param iv The initialization vector (nonce). This must be a readable
* buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
* \param add The additional data field.
* \param add The additional data field. This must be a readable buffer
* of at least that \p add_len Bytes..
* \param add_len The length of additional data in Bytes.
* Must be less than 2^16 - 2^8.
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* Must be at least \p length Bytes wide.
* \param tag The buffer holding the authentication field.
* \param tag_len The length of the authentication field in Bytes.
* This must be less than 2^16 - 2^8.
* \param input The buffer holding the input data. If \p length is greater
* than zero, \p input must be a readable buffer of at least
* that length.
* \param output The buffer holding the output data. If \p length is greater
* than zero, \p output must be a writable buffer of at least
* that length.
* \param tag The buffer holding the authentication field. This must be a
* readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field to generate in Bytes:
* 4, 6, 8, 10, 12, 14 or 16.
*
* \return \c 0 on success. This indicates that the message is authentic.
@@ -227,23 +282,30 @@ int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
* this function as \p tag_len. (\p tag needs to be adjusted
* accordingly.)
*
* \param ctx The CCM context to use for decryption.
* \param ctx The CCM context to use for decryption. This must be
* initialized and bound to a key.
* \param length The length of the input data in Bytes.
* \param iv Initialization vector (nonce).
* \param iv The initialization vector (nonce). This must be a readable
* buffer of at least \p iv_len Bytes.
* \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12,
* or 13. The length L of the message length field is
* 15 - \p iv_len.
* \param add The additional data field.
* \param add The additional data field. This must be a readable buffer of
* at least that \p add_len Bytes.
* \param add_len The length of additional data in Bytes.
* Must be less than 2^16 - 2^8.
* \param input The buffer holding the input data.
* \param output The buffer holding the output data.
* Must be at least \p length Bytes wide.
* \param tag The buffer holding the authentication field.
* This must be less than 2^16 - 2^8.
* \param input The buffer holding the input data. If \p length is greater
* than zero, \p input must be a readable buffer of at least
* that length.
* \param output The buffer holding the output data. If \p length is greater
* than zero, \p output must be a writable buffer of at least
* that length.
* \param tag The buffer holding the authentication field. This must be a
* readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication field in Bytes.
* 0, 4, 6, 8, 10, 12, 14 or 16.
*
* \warning Passing 0 as \p tag_len means that the message is no
* \warning Passing \c 0 as \p tag_len means that the message is nos
* longer authenticated.
*
* \return \c 0 on success.

275
externals/mbedtls/include/mbedtls/certs.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Sample certificates and DHM parameters for testing
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,79 +44,231 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CERTS_H
#define MBEDTLS_CERTS_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
/* List of all PEM-encoded CA certificates, terminated by NULL;
* PEM encoded if MBEDTLS_PEM_PARSE_C is enabled, DER encoded
* otherwise. */
extern const char * mbedtls_test_cas[];
extern const size_t mbedtls_test_cas_len[];
/* List of all DER-encoded CA certificates, terminated by NULL */
extern const unsigned char * mbedtls_test_cas_der[];
extern const size_t mbedtls_test_cas_der_len[];
#if defined(MBEDTLS_PEM_PARSE_C)
/* Concatenation of all CA certificates in PEM format if available */
extern const char mbedtls_test_cas_pem[];
extern const size_t mbedtls_test_cas_pem_len;
#endif
/* List of all CA certificates, terminated by NULL */
extern const char * mbedtls_test_cas[];
extern const size_t mbedtls_test_cas_len[];
#endif /* MBEDTLS_PEM_PARSE_C */
/*
* Convenience for users who just want a certificate:
* RSA by default, or ECDSA if RSA is not available
* CA test certificates
*/
extern const char * mbedtls_test_ca_crt;
extern const size_t mbedtls_test_ca_crt_len;
extern const char * mbedtls_test_ca_key;
extern const size_t mbedtls_test_ca_key_len;
extern const char * mbedtls_test_ca_pwd;
extern const size_t mbedtls_test_ca_pwd_len;
extern const char * mbedtls_test_srv_crt;
extern const size_t mbedtls_test_srv_crt_len;
extern const char * mbedtls_test_srv_key;
extern const size_t mbedtls_test_srv_key_len;
extern const char * mbedtls_test_cli_crt;
extern const size_t mbedtls_test_cli_crt_len;
extern const char * mbedtls_test_cli_key;
extern const size_t mbedtls_test_cli_key_len;
#if defined(MBEDTLS_ECDSA_C)
extern const char mbedtls_test_ca_crt_ec[];
extern const char mbedtls_test_ca_crt_ec_pem[];
extern const char mbedtls_test_ca_key_ec_pem[];
extern const char mbedtls_test_ca_pwd_ec_pem[];
extern const char mbedtls_test_ca_key_rsa_pem[];
extern const char mbedtls_test_ca_pwd_rsa_pem[];
extern const char mbedtls_test_ca_crt_rsa_sha1_pem[];
extern const char mbedtls_test_ca_crt_rsa_sha256_pem[];
extern const unsigned char mbedtls_test_ca_crt_ec_der[];
extern const unsigned char mbedtls_test_ca_key_ec_der[];
extern const unsigned char mbedtls_test_ca_key_rsa_der[];
extern const unsigned char mbedtls_test_ca_crt_rsa_sha1_der[];
extern const unsigned char mbedtls_test_ca_crt_rsa_sha256_der[];
extern const size_t mbedtls_test_ca_crt_ec_pem_len;
extern const size_t mbedtls_test_ca_key_ec_pem_len;
extern const size_t mbedtls_test_ca_pwd_ec_pem_len;
extern const size_t mbedtls_test_ca_key_rsa_pem_len;
extern const size_t mbedtls_test_ca_pwd_rsa_pem_len;
extern const size_t mbedtls_test_ca_crt_rsa_sha1_pem_len;
extern const size_t mbedtls_test_ca_crt_rsa_sha256_pem_len;
extern const size_t mbedtls_test_ca_crt_ec_der_len;
extern const size_t mbedtls_test_ca_key_ec_der_len;
extern const size_t mbedtls_test_ca_pwd_ec_der_len;
extern const size_t mbedtls_test_ca_key_rsa_der_len;
extern const size_t mbedtls_test_ca_pwd_rsa_der_len;
extern const size_t mbedtls_test_ca_crt_rsa_sha1_der_len;
extern const size_t mbedtls_test_ca_crt_rsa_sha256_der_len;
/* Config-dependent dispatch between PEM and DER encoding
* (PEM if enabled, otherwise DER) */
extern const char mbedtls_test_ca_crt_ec[];
extern const char mbedtls_test_ca_key_ec[];
extern const char mbedtls_test_ca_pwd_ec[];
extern const char mbedtls_test_ca_key_rsa[];
extern const char mbedtls_test_ca_pwd_rsa[];
extern const char mbedtls_test_ca_crt_rsa_sha1[];
extern const char mbedtls_test_ca_crt_rsa_sha256[];
extern const size_t mbedtls_test_ca_crt_ec_len;
extern const char mbedtls_test_ca_key_ec[];
extern const size_t mbedtls_test_ca_key_ec_len;
extern const char mbedtls_test_ca_pwd_ec[];
extern const size_t mbedtls_test_ca_pwd_ec_len;
extern const char mbedtls_test_srv_crt_ec[];
extern const size_t mbedtls_test_srv_crt_ec_len;
extern const char mbedtls_test_srv_key_ec[];
extern const size_t mbedtls_test_srv_key_ec_len;
extern const char mbedtls_test_cli_crt_ec[];
extern const size_t mbedtls_test_cli_crt_ec_len;
extern const char mbedtls_test_cli_key_ec[];
extern const size_t mbedtls_test_cli_key_ec_len;
#endif
#if defined(MBEDTLS_RSA_C)
extern const char mbedtls_test_ca_crt_rsa[];
extern const size_t mbedtls_test_ca_crt_rsa_len;
extern const char mbedtls_test_ca_key_rsa[];
extern const size_t mbedtls_test_ca_key_rsa_len;
extern const char mbedtls_test_ca_pwd_rsa[];
extern const size_t mbedtls_test_ca_pwd_rsa_len;
extern const char mbedtls_test_srv_crt_rsa[];
extern const size_t mbedtls_test_srv_crt_rsa_len;
extern const char mbedtls_test_srv_key_rsa[];
extern const size_t mbedtls_test_ca_crt_rsa_sha1_len;
extern const size_t mbedtls_test_ca_crt_rsa_sha256_len;
/* Config-dependent dispatch between SHA-1 and SHA-256
* (SHA-256 if enabled, otherwise SHA-1) */
extern const char mbedtls_test_ca_crt_rsa[];
extern const size_t mbedtls_test_ca_crt_rsa_len;
/* Config-dependent dispatch between EC and RSA
* (RSA if enabled, otherwise EC) */
extern const char * mbedtls_test_ca_crt;
extern const char * mbedtls_test_ca_key;
extern const char * mbedtls_test_ca_pwd;
extern const size_t mbedtls_test_ca_crt_len;
extern const size_t mbedtls_test_ca_key_len;
extern const size_t mbedtls_test_ca_pwd_len;
/*
* Server test certificates
*/
extern const char mbedtls_test_srv_crt_ec_pem[];
extern const char mbedtls_test_srv_key_ec_pem[];
extern const char mbedtls_test_srv_pwd_ec_pem[];
extern const char mbedtls_test_srv_key_rsa_pem[];
extern const char mbedtls_test_srv_pwd_rsa_pem[];
extern const char mbedtls_test_srv_crt_rsa_sha1_pem[];
extern const char mbedtls_test_srv_crt_rsa_sha256_pem[];
extern const unsigned char mbedtls_test_srv_crt_ec_der[];
extern const unsigned char mbedtls_test_srv_key_ec_der[];
extern const unsigned char mbedtls_test_srv_key_rsa_der[];
extern const unsigned char mbedtls_test_srv_crt_rsa_sha1_der[];
extern const unsigned char mbedtls_test_srv_crt_rsa_sha256_der[];
extern const size_t mbedtls_test_srv_crt_ec_pem_len;
extern const size_t mbedtls_test_srv_key_ec_pem_len;
extern const size_t mbedtls_test_srv_pwd_ec_pem_len;
extern const size_t mbedtls_test_srv_key_rsa_pem_len;
extern const size_t mbedtls_test_srv_pwd_rsa_pem_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha1_pem_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha256_pem_len;
extern const size_t mbedtls_test_srv_crt_ec_der_len;
extern const size_t mbedtls_test_srv_key_ec_der_len;
extern const size_t mbedtls_test_srv_pwd_ec_der_len;
extern const size_t mbedtls_test_srv_key_rsa_der_len;
extern const size_t mbedtls_test_srv_pwd_rsa_der_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha1_der_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha256_der_len;
/* Config-dependent dispatch between PEM and DER encoding
* (PEM if enabled, otherwise DER) */
extern const char mbedtls_test_srv_crt_ec[];
extern const char mbedtls_test_srv_key_ec[];
extern const char mbedtls_test_srv_pwd_ec[];
extern const char mbedtls_test_srv_key_rsa[];
extern const char mbedtls_test_srv_pwd_rsa[];
extern const char mbedtls_test_srv_crt_rsa_sha1[];
extern const char mbedtls_test_srv_crt_rsa_sha256[];
extern const size_t mbedtls_test_srv_crt_ec_len;
extern const size_t mbedtls_test_srv_key_ec_len;
extern const size_t mbedtls_test_srv_pwd_ec_len;
extern const size_t mbedtls_test_srv_key_rsa_len;
extern const char mbedtls_test_cli_crt_rsa[];
extern const size_t mbedtls_test_cli_crt_rsa_len;
extern const char mbedtls_test_cli_key_rsa[];
extern const size_t mbedtls_test_srv_pwd_rsa_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha1_len;
extern const size_t mbedtls_test_srv_crt_rsa_sha256_len;
/* Config-dependent dispatch between SHA-1 and SHA-256
* (SHA-256 if enabled, otherwise SHA-1) */
extern const char mbedtls_test_srv_crt_rsa[];
extern const size_t mbedtls_test_srv_crt_rsa_len;
/* Config-dependent dispatch between EC and RSA
* (RSA if enabled, otherwise EC) */
extern const char * mbedtls_test_srv_crt;
extern const char * mbedtls_test_srv_key;
extern const char * mbedtls_test_srv_pwd;
extern const size_t mbedtls_test_srv_crt_len;
extern const size_t mbedtls_test_srv_key_len;
extern const size_t mbedtls_test_srv_pwd_len;
/*
* Client test certificates
*/
extern const char mbedtls_test_cli_crt_ec_pem[];
extern const char mbedtls_test_cli_key_ec_pem[];
extern const char mbedtls_test_cli_pwd_ec_pem[];
extern const char mbedtls_test_cli_key_rsa_pem[];
extern const char mbedtls_test_cli_pwd_rsa_pem[];
extern const char mbedtls_test_cli_crt_rsa_pem[];
extern const unsigned char mbedtls_test_cli_crt_ec_der[];
extern const unsigned char mbedtls_test_cli_key_ec_der[];
extern const unsigned char mbedtls_test_cli_key_rsa_der[];
extern const unsigned char mbedtls_test_cli_crt_rsa_der[];
extern const size_t mbedtls_test_cli_crt_ec_pem_len;
extern const size_t mbedtls_test_cli_key_ec_pem_len;
extern const size_t mbedtls_test_cli_pwd_ec_pem_len;
extern const size_t mbedtls_test_cli_key_rsa_pem_len;
extern const size_t mbedtls_test_cli_pwd_rsa_pem_len;
extern const size_t mbedtls_test_cli_crt_rsa_pem_len;
extern const size_t mbedtls_test_cli_crt_ec_der_len;
extern const size_t mbedtls_test_cli_key_ec_der_len;
extern const size_t mbedtls_test_cli_key_rsa_der_len;
extern const size_t mbedtls_test_cli_crt_rsa_der_len;
/* Config-dependent dispatch between PEM and DER encoding
* (PEM if enabled, otherwise DER) */
extern const char mbedtls_test_cli_crt_ec[];
extern const char mbedtls_test_cli_key_ec[];
extern const char mbedtls_test_cli_pwd_ec[];
extern const char mbedtls_test_cli_key_rsa[];
extern const char mbedtls_test_cli_pwd_rsa[];
extern const char mbedtls_test_cli_crt_rsa[];
extern const size_t mbedtls_test_cli_crt_ec_len;
extern const size_t mbedtls_test_cli_key_ec_len;
extern const size_t mbedtls_test_cli_pwd_ec_len;
extern const size_t mbedtls_test_cli_key_rsa_len;
#endif
extern const size_t mbedtls_test_cli_pwd_rsa_len;
extern const size_t mbedtls_test_cli_crt_rsa_len;
/* Config-dependent dispatch between EC and RSA
* (RSA if enabled, otherwise EC) */
extern const char * mbedtls_test_cli_crt;
extern const char * mbedtls_test_cli_key;
extern const char * mbedtls_test_cli_pwd;
extern const size_t mbedtls_test_cli_crt_len;
extern const size_t mbedtls_test_cli_key_len;
extern const size_t mbedtls_test_cli_pwd_len;
#ifdef __cplusplus
}

86
externals/mbedtls/include/mbedtls/chacha20.h vendored
View File

@@ -12,8 +12,32 @@
* \author Daniel King <damaki.gh@gmail.com>
*/
/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
* SPDX-License-Identifier: GPL-2.0
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,7 +53,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CHACHA20_H
@@ -45,7 +69,13 @@
#include <stddef.h>
#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /**< Invalid input parameter(s). */
/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
* used. */
#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */
/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED -0x0055 /**< Chacha20 hardware accelerator failed. */
#ifdef __cplusplus
@@ -54,7 +84,7 @@ extern "C" {
#if !defined(MBEDTLS_CHACHA20_ALT)
typedef struct
typedef struct mbedtls_chacha20_context
{
uint32_t state[16]; /*! The state (before round operations). */
uint8_t keystream8[64]; /*! Leftover keystream bytes. */
@@ -79,13 +109,18 @@ mbedtls_chacha20_context;
* \c mbedtls_chacha20_free().
*
* \param ctx The ChaCha20 context to initialize.
* This must not be \c NULL.
*/
void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );
/**
* \brief This function releases and clears the specified ChaCha20 context.
* \brief This function releases and clears the specified
* ChaCha20 context.
*
* \param ctx The ChaCha20 context to clear. This may be \c NULL,
* in which case this function is a no-op. If it is not
* \c NULL, it must point to an initialized context.
*
* \param ctx The ChaCha20 context to clear.
*/
void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );
@@ -98,7 +133,9 @@ void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );
* \c mbedtls_chacha_update().
*
* \param ctx The ChaCha20 context to which the key should be bound.
* \param key The encryption/decryption key. Must be 32 bytes in length.
* It must be initialized.
* \param key The encryption/decryption key. This must be \c 32 Bytes
* in length.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
@@ -117,8 +154,9 @@ int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
* messages encrypted with the same nonce and key.
*
* \param ctx The ChaCha20 context to which the nonce should be bound.
* \param nonce The nonce. Must be 12 bytes in size.
* \param counter The initial counter value. This is usually 0.
* It must be initialized and bound to a key.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
@@ -146,16 +184,16 @@ int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
* key and nonce.
*
* \param ctx The ChaCha20 context to use for encryption or decryption.
* \param size The length of the input data in bytes.
* It must be initialized and bound to a key and nonce.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be NULL if size == 0.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* Must be able to hold \p size bytes.
* This pointer can be NULL if size == 0.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if the ctx, input, or
* output pointers are NULL.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
size_t size,
@@ -176,19 +214,19 @@ int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \param key The encryption/decryption key. Must be 32 bytes in length.
* \param nonce The nonce. Must be 12 bytes in size.
* \param counter The initial counter value. This is usually 0.
* \param size The length of the input data in bytes.
* \param key The encryption/decryption key.
* This must be \c 32 Bytes in length.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be NULL if size == 0.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* Must be able to hold \p size bytes.
* This pointer can be NULL if size == 0.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if key, nonce, input,
* or output is NULL.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_crypt( const unsigned char key[32],
const unsigned char nonce[12],

115
externals/mbedtls/include/mbedtls/chachapoly.h vendored
View File

@@ -12,8 +12,32 @@
* \author Daniel King <damaki.gh@gmail.com>
*/
/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
* SPDX-License-Identifier: GPL-2.0
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,7 +53,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CHACHAPOLY_H
@@ -62,7 +86,7 @@ mbedtls_chachapoly_mode_t;
#include "chacha20.h"
typedef struct
typedef struct mbedtls_chachapoly_context
{
mbedtls_chacha20_context chacha20_ctx; /**< The ChaCha20 context. */
mbedtls_poly1305_context poly1305_ctx; /**< The Poly1305 context. */
@@ -117,27 +141,29 @@ mbedtls_chachapoly_context;
* all previous outputs of \c mbedtls_chachapoly_update(),
* otherwise you can now safely use the plaintext.
*
* \param ctx The ChachaPoly context to initialize.
* \param ctx The ChachaPoly context to initialize. Must not be \c NULL.
*/
void mbedtls_chachapoly_init( mbedtls_chachapoly_context *ctx );
/**
* \brief This function releases and clears the specified ChaCha20-Poly1305 context.
* \brief This function releases and clears the specified
* ChaCha20-Poly1305 context.
*
* \param ctx The ChachaPoly context to clear.
* \param ctx The ChachaPoly context to clear. This may be \c NULL, in which
* case this function is a no-op.
*/
void mbedtls_chachapoly_free( mbedtls_chachapoly_context *ctx );
/**
* \brief This function sets the ChaCha20-Poly1305 symmetric encryption key.
* \brief This function sets the ChaCha20-Poly1305
* symmetric encryption key.
*
* \param ctx The ChaCha20-Poly1305 context to which the key should be
* bound.
* \param key The 256-bit (32 bytes) key.
* bound. This must be initialized.
* \param key The \c 256 Bit (\c 32 Bytes) key.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if \p ctx or \p key are NULL.
* \return A negative error code on failure.
*/
int mbedtls_chachapoly_setkey( mbedtls_chachapoly_context *ctx,
const unsigned char key[32] );
@@ -157,14 +183,15 @@ int mbedtls_chachapoly_setkey( mbedtls_chachapoly_context *ctx,
* \warning Decryption with the piecewise API is discouraged, see the
* warning on \c mbedtls_chachapoly_init().
*
* \param ctx The ChaCha20-Poly1305 context.
* \param nonce The nonce/IV to use for the message. Must be 12 bytes.
* \param ctx The ChaCha20-Poly1305 context. This must be initialized
* and bound to a key.
* \param nonce The nonce/IV to use for the message.
* This must be a redable buffer of length \c 12 Bytes.
* \param mode The operation to perform: #MBEDTLS_CHACHAPOLY_ENCRYPT or
* #MBEDTLS_CHACHAPOLY_DECRYPT (discouraged, see warning).
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if \p ctx or \p mac are NULL.
* \return A negative error code on failure.
*/
int mbedtls_chachapoly_starts( mbedtls_chachapoly_context *ctx,
const unsigned char nonce[12],
@@ -195,11 +222,12 @@ int mbedtls_chachapoly_starts( mbedtls_chachapoly_context *ctx,
* \warning Decryption with the piecewise API is discouraged, see the
* warning on \c mbedtls_chachapoly_init().
*
* \param ctx The ChaCha20-Poly1305 context to use.
* \param aad_len The length (in bytes) of the AAD. The length has no
* \param ctx The ChaCha20-Poly1305 context. This must be initialized
* and bound to a key.
* \param aad_len The length in Bytes of the AAD. The length has no
* restrictions.
* \param aad Buffer containing the AAD.
* This pointer can be NULL if aad_len == 0.
* This pointer can be \c NULL if `aad_len == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
@@ -229,20 +257,19 @@ int mbedtls_chachapoly_update_aad( mbedtls_chachapoly_context *ctx,
* \warning Decryption with the piecewise API is discouraged, see the
* warning on \c mbedtls_chachapoly_init().
*
* \param ctx The ChaCha20-Poly1305 context to use.
* \param ctx The ChaCha20-Poly1305 context to use. This must be initialized.
* \param len The length (in bytes) of the data to encrypt or decrypt.
* \param input The buffer containing the data to encrypt or decrypt.
* This pointer can be NULL if len == 0.
* \param output The buffer to where the encrypted or decrypted data is written.
* Must be able to hold \p len bytes.
* This pointer can be NULL if len == 0.
* This pointer can be \c NULL if `len == 0`.
* \param output The buffer to where the encrypted or decrypted data is
* written. This must be able to hold \p len bytes.
* This pointer can be \c NULL if `len == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if \p ctx, \p input, or \p output are NULL.
* \return #MBEDTLS_ERR_CHACHAPOLY_BAD_STATE
* if the operation has not been started or has been
* finished.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_chachapoly_update( mbedtls_chachapoly_context *ctx,
size_t len,
@@ -253,18 +280,17 @@ int mbedtls_chachapoly_update( mbedtls_chachapoly_context *ctx,
* \brief This function finished the ChaCha20-Poly1305 operation and
* generates the MAC (authentication tag).
*
* \param ctx The ChaCha20-Poly1305 context to use.
* \param ctx The ChaCha20-Poly1305 context to use. This must be initialized.
* \param mac The buffer to where the 128-bit (16 bytes) MAC is written.
*
* \warning Decryption with the piecewise API is discouraged, see the
* warning on \c mbedtls_chachapoly_init().
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if \p ctx or \p mac are NULL.
* \return #MBEDTLS_ERR_CHACHAPOLY_BAD_STATE
* if the operation has not been started or has been
* finished.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_chachapoly_finish( mbedtls_chachapoly_context *ctx,
unsigned char mac[16] );
@@ -282,20 +308,21 @@ int mbedtls_chachapoly_finish( mbedtls_chachapoly_context *ctx,
* and key.
*
* \param ctx The ChaCha20-Poly1305 context to use (holds the key).
* This must be initialized.
* \param length The length (in bytes) of the data to encrypt or decrypt.
* \param nonce The 96-bit (12 bytes) nonce/IV to use.
* \param aad The buffer containing the additional authenticated data (AAD).
* This pointer can be NULL if aad_len == 0.
* \param aad The buffer containing the additional authenticated
* data (AAD). This pointer can be \c NULL if `aad_len == 0`.
* \param aad_len The length (in bytes) of the AAD data to process.
* \param input The buffer containing the data to encrypt or decrypt.
* This pointer can be NULL if ilen == 0.
* \param output The buffer to where the encrypted or decrypted data is written.
* This pointer can be NULL if ilen == 0.
* \param tag The buffer to where the computed 128-bit (16 bytes) MAC is written.
* This pointer can be \c NULL if `ilen == 0`.
* \param output The buffer to where the encrypted or decrypted data
* is written. This pointer can be \c NULL if `ilen == 0`.
* \param tag The buffer to where the computed 128-bit (16 bytes) MAC
* is written. This must not be \c NULL.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if one or more of the required parameters are NULL.
* \return A negative error code on failure.
*/
int mbedtls_chachapoly_encrypt_and_tag( mbedtls_chachapoly_context *ctx,
size_t length,
@@ -314,22 +341,22 @@ int mbedtls_chachapoly_encrypt_and_tag( mbedtls_chachapoly_context *ctx,
* \c mbedtls_chachapoly_setkey().
*
* \param ctx The ChaCha20-Poly1305 context to use (holds the key).
* \param length The length (in bytes) of the data to decrypt.
* \param nonce The 96-bit (12 bytes) nonce/IV to use.
* \param length The length (in Bytes) of the data to decrypt.
* \param nonce The \c 96 Bit (\c 12 bytes) nonce/IV to use.
* \param aad The buffer containing the additional authenticated data (AAD).
* This pointer can be NULL if aad_len == 0.
* This pointer can be \c NULL if `aad_len == 0`.
* \param aad_len The length (in bytes) of the AAD data to process.
* \param tag The buffer holding the authentication tag.
* This must be a readable buffer of length \c 16 Bytes.
* \param input The buffer containing the data to decrypt.
* This pointer can be NULL if ilen == 0.
* This pointer can be \c NULL if `ilen == 0`.
* \param output The buffer to where the decrypted data is written.
* This pointer can be NULL if ilen == 0.
* This pointer can be \c NULL if `ilen == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if one or more of the required parameters are NULL.
* \return #MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED
* if the data was not authentic.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_chachapoly_auth_decrypt( mbedtls_chachapoly_context *ctx,
size_t length,

101
externals/mbedtls/include/mbedtls/check_config.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Consistency checks for configuration options
*/
/*
* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
/*
@@ -110,11 +133,22 @@
#error "MBEDTLS_ECJPAKE_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_ECP_RESTARTABLE) && \
( defined(MBEDTLS_ECDH_COMPUTE_SHARED_ALT) || \
defined(MBEDTLS_ECDH_GEN_PUBLIC_ALT) || \
defined(MBEDTLS_ECDSA_SIGN_ALT) || \
defined(MBEDTLS_ECDSA_VERIFY_ALT) || \
defined(MBEDTLS_ECDSA_GENKEY_ALT) || \
defined(MBEDTLS_ECP_INTERNAL_ALT) || \
defined(MBEDTLS_ECP_ALT) )
#error "MBEDTLS_ECP_RESTARTABLE defined, but it cannot coexist with an alternative ECP implementation"
#endif
#if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C)
#error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_ECP_C) && ( !defined(MBEDTLS_BIGNUM_C) || ( \
#if defined(MBEDTLS_ECP_C) && ( !defined(MBEDTLS_BIGNUM_C) || ( \
!defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) && \
@@ -125,10 +159,26 @@
!defined(MBEDTLS_ECP_DP_BP512R1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED) ) )
!defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED) && \
!defined(MBEDTLS_ECP_DP_CURVE25519_ENABLED) && \
!defined(MBEDTLS_ECP_DP_CURVE448_ENABLED) ) )
#error "MBEDTLS_ECP_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_ECP_C) && !( \
defined(MBEDTLS_ECP_ALT) || \
defined(MBEDTLS_CTR_DRBG_C) || \
defined(MBEDTLS_HMAC_DRBG_C) || \
defined(MBEDTLS_SHA512_C) || \
defined(MBEDTLS_SHA256_C) || \
defined(MBEDTLS_ECP_NO_INTERNAL_RNG))
#error "MBEDTLS_ECP_C requires a DRBG or SHA-2 module unless MBEDTLS_ECP_NO_INTERNAL_RNG is defined or an alternative implementation is used"
#endif
#if defined(MBEDTLS_PK_PARSE_C) && !defined(MBEDTLS_ASN1_PARSE_C)
#error "MBEDTLS_PK_PARSE_C defined, but not all prerequesites"
#endif
#if defined(MBEDTLS_ENTROPY_C) && (!defined(MBEDTLS_SHA512_C) && \
!defined(MBEDTLS_SHA256_C))
#error "MBEDTLS_ENTROPY_C defined, but not all prerequisites"
@@ -147,6 +197,16 @@
#error "MBEDTLS_ENTROPY_FORCE_SHA256 defined, but not all prerequisites"
#endif
#if defined(__has_feature)
#if __has_feature(memory_sanitizer)
#define MBEDTLS_HAS_MEMSAN
#endif
#endif
#if defined(MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN) && !defined(MBEDTLS_HAS_MEMSAN)
#error "MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN requires building with MemorySanitizer"
#endif
#undef MBEDTLS_HAS_MEMSAN
#if defined(MBEDTLS_TEST_NULL_ENTROPY) && \
( !defined(MBEDTLS_ENTROPY_C) || !defined(MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES) )
#error "MBEDTLS_TEST_NULL_ENTROPY defined, but not all prerequisites"
@@ -266,6 +326,14 @@
#error "MBEDTLS_MEMORY_BUFFER_ALLOC_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_MEMORY_BACKTRACE) && !defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
#error "MBEDTLS_MEMORY_BACKTRACE defined, but not all prerequesites"
#endif
#if defined(MBEDTLS_MEMORY_DEBUG) && !defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C)
#error "MBEDTLS_MEMORY_DEBUG defined, but not all prerequesites"
#endif
#if defined(MBEDTLS_PADLOCK_C) && !defined(MBEDTLS_HAVE_ASM)
#error "MBEDTLS_PADLOCK_C defined, but not all prerequisites"
#endif
@@ -523,6 +591,23 @@
#error "MBEDTLS_SSL_PROTO_TLS1_2 defined, but not all prerequisites"
#endif
#if (defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_1) || defined(MBEDTLS_SSL_PROTO_TLS1_2)) && \
!(defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) )
#error "One or more versions of the TLS protocol are enabled " \
"but no key exchange methods defined with MBEDTLS_KEY_EXCHANGE_xxxx"
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS) && \
!defined(MBEDTLS_SSL_PROTO_TLS1_1) && \
!defined(MBEDTLS_SSL_PROTO_TLS1_2)
@@ -646,6 +731,10 @@
#error "MBEDTLS_X509_CREATE_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_CERTS_C) && !defined(MBEDTLS_X509_USE_C)
#error "MBEDTLS_CERTS_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C) && ( !defined(MBEDTLS_X509_USE_C) )
#error "MBEDTLS_X509_CRT_PARSE_C defined, but not all prerequisites"
#endif
@@ -678,7 +767,7 @@
/*
* Avoid warning from -pedantic. This is a convenient place for this
* workaround since this is included by every single file before the
* #if defined(MBEDTLS_xxx_C) that results in emtpy translation units.
* #if defined(MBEDTLS_xxx_C) that results in empty translation units.
*/
typedef int mbedtls_iso_c_forbids_empty_translation_units;

264
externals/mbedtls/include/mbedtls/cipher.h vendored
View File

@@ -8,8 +8,31 @@
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CIPHER_H
@@ -38,6 +61,7 @@
#endif
#include <stddef.h>
#include "platform_util.h"
#if defined(MBEDTLS_GCM_C) || defined(MBEDTLS_CCM_C) || defined(MBEDTLS_CHACHAPOLY_C)
#define MBEDTLS_CIPHER_MODE_AEAD
@@ -47,7 +71,8 @@
#define MBEDTLS_CIPHER_MODE_WITH_PADDING
#endif
#if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER)
#if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER) || \
defined(MBEDTLS_CHACHA20_C)
#define MBEDTLS_CIPHER_MODE_STREAM
#endif
@@ -63,6 +88,8 @@
#define MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED -0x6280 /**< Decryption of block requires a full block. */
#define MBEDTLS_ERR_CIPHER_AUTH_FAILED -0x6300 /**< Authentication failed (for AEAD modes). */
#define MBEDTLS_ERR_CIPHER_INVALID_CONTEXT -0x6380 /**< The context is invalid. For example, because it was freed. */
/* MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED -0x6400 /**< Cipher hardware accelerator failed. */
#define MBEDTLS_CIPHER_VARIABLE_IV_LEN 0x01 /**< Cipher accepts IVs of variable length. */
@@ -237,7 +264,8 @@ typedef struct mbedtls_cmac_context_t mbedtls_cmac_context_t;
* Cipher information. Allows calling cipher functions
* in a generic way.
*/
typedef struct {
typedef struct mbedtls_cipher_info_t
{
/** Full cipher identifier. For example,
* MBEDTLS_CIPHER_AES_256_CBC.
*/
@@ -278,7 +306,8 @@ typedef struct {
/**
* Generic cipher context.
*/
typedef struct {
typedef struct mbedtls_cipher_context_t
{
/** Information about the associated cipher. */
const mbedtls_cipher_info_t *cipher_info;
@@ -333,11 +362,12 @@ const int *mbedtls_cipher_list( void );
* \brief This function retrieves the cipher-information
* structure associated with the given cipher name.
*
* \param cipher_name Name of the cipher to search for.
* \param cipher_name Name of the cipher to search for. This must not be
* \c NULL.
*
* \return The cipher information structure associated with the
* given \p cipher_name.
* \return NULL if the associated cipher information is not found.
* \return \c NULL if the associated cipher information is not found.
*/
const mbedtls_cipher_info_t *mbedtls_cipher_info_from_string( const char *cipher_name );
@@ -349,7 +379,7 @@ const mbedtls_cipher_info_t *mbedtls_cipher_info_from_string( const char *cipher
*
* \return The cipher information structure associated with the
* given \p cipher_type.
* \return NULL if the associated cipher information is not found.
* \return \c NULL if the associated cipher information is not found.
*/
const mbedtls_cipher_info_t *mbedtls_cipher_info_from_type( const mbedtls_cipher_type_t cipher_type );
@@ -365,7 +395,7 @@ const mbedtls_cipher_info_t *mbedtls_cipher_info_from_type( const mbedtls_cipher
*
* \return The cipher information structure associated with the
* given \p cipher_id.
* \return NULL if the associated cipher information is not found.
* \return \c NULL if the associated cipher information is not found.
*/
const mbedtls_cipher_info_t *mbedtls_cipher_info_from_values( const mbedtls_cipher_id_t cipher_id,
int key_bitlen,
@@ -373,6 +403,8 @@ const mbedtls_cipher_info_t *mbedtls_cipher_info_from_values( const mbedtls_ciph
/**
* \brief This function initializes a \p cipher_context as NONE.
*
* \param ctx The context to be initialized. This must not be \c NULL.
*/
void mbedtls_cipher_init( mbedtls_cipher_context_t *ctx );
@@ -380,6 +412,10 @@ void mbedtls_cipher_init( mbedtls_cipher_context_t *ctx );
* \brief This function frees and clears the cipher-specific
* context of \p ctx. Freeing \p ctx itself remains the
* responsibility of the caller.
*
* \param ctx The context to be freed. If this is \c NULL, the
* function has no effect, otherwise this must point to an
* initialized context.
*/
void mbedtls_cipher_free( mbedtls_cipher_context_t *ctx );
@@ -389,7 +425,7 @@ void mbedtls_cipher_free( mbedtls_cipher_context_t *ctx );
* structure with the appropriate values. It also clears
* the structure.
*
* \param ctx The context to initialize. May not be NULL.
* \param ctx The context to initialize. This must be initialized.
* \param cipher_info The cipher to use.
*
* \return \c 0 on success.
@@ -402,19 +438,22 @@ void mbedtls_cipher_free( mbedtls_cipher_context_t *ctx );
* In future versions, the caller will be required to call
* mbedtls_cipher_init() on the structure first.
*/
int mbedtls_cipher_setup( mbedtls_cipher_context_t *ctx, const mbedtls_cipher_info_t *cipher_info );
int mbedtls_cipher_setup( mbedtls_cipher_context_t *ctx,
const mbedtls_cipher_info_t *cipher_info );
/**
* \brief This function returns the block size of the given cipher.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The size of the blocks of the cipher.
* \return 0 if \p ctx has not been initialized.
* \return The block size of the underlying cipher.
* \return \c 0 if \p ctx has not been initialized.
*/
static inline unsigned int mbedtls_cipher_get_block_size( const mbedtls_cipher_context_t *ctx )
static inline unsigned int mbedtls_cipher_get_block_size(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 );
if( ctx->cipher_info == NULL )
return 0;
return ctx->cipher_info->block_size;
@@ -424,14 +463,16 @@ static inline unsigned int mbedtls_cipher_get_block_size( const mbedtls_cipher_c
* \brief This function returns the mode of operation for
* the cipher. For example, MBEDTLS_MODE_CBC.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The mode of operation.
* \return #MBEDTLS_MODE_NONE if \p ctx has not been initialized.
*/
static inline mbedtls_cipher_mode_t mbedtls_cipher_get_cipher_mode( const mbedtls_cipher_context_t *ctx )
static inline mbedtls_cipher_mode_t mbedtls_cipher_get_cipher_mode(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, MBEDTLS_MODE_NONE );
if( ctx->cipher_info == NULL )
return MBEDTLS_MODE_NONE;
return ctx->cipher_info->mode;
@@ -441,15 +482,17 @@ static inline mbedtls_cipher_mode_t mbedtls_cipher_get_cipher_mode( const mbedtl
* \brief This function returns the size of the IV or nonce
* of the cipher, in Bytes.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The recommended IV size if no IV has been set.
* \return \c 0 for ciphers not using an IV or a nonce.
* \return The actual size if an IV has been set.
*/
static inline int mbedtls_cipher_get_iv_size( const mbedtls_cipher_context_t *ctx )
static inline int mbedtls_cipher_get_iv_size(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 );
if( ctx->cipher_info == NULL )
return 0;
if( ctx->iv_size != 0 )
@@ -461,14 +504,17 @@ static inline int mbedtls_cipher_get_iv_size( const mbedtls_cipher_context_t *ct
/**
* \brief This function returns the type of the given cipher.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The type of the cipher.
* \return #MBEDTLS_CIPHER_NONE if \p ctx has not been initialized.
*/
static inline mbedtls_cipher_type_t mbedtls_cipher_get_type( const mbedtls_cipher_context_t *ctx )
static inline mbedtls_cipher_type_t mbedtls_cipher_get_type(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET(
ctx != NULL, MBEDTLS_CIPHER_NONE );
if( ctx->cipher_info == NULL )
return MBEDTLS_CIPHER_NONE;
return ctx->cipher_info->type;
@@ -478,14 +524,16 @@ static inline mbedtls_cipher_type_t mbedtls_cipher_get_type( const mbedtls_ciphe
* \brief This function returns the name of the given cipher
* as a string.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The name of the cipher.
* \return NULL if \p ctx has not been not initialized.
*/
static inline const char *mbedtls_cipher_get_name( const mbedtls_cipher_context_t *ctx )
static inline const char *mbedtls_cipher_get_name(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 );
if( ctx->cipher_info == NULL )
return 0;
return ctx->cipher_info->name;
@@ -494,15 +542,18 @@ static inline const char *mbedtls_cipher_get_name( const mbedtls_cipher_context_
/**
* \brief This function returns the key length of the cipher.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The key length of the cipher in bits.
* \return #MBEDTLS_KEY_LENGTH_NONE if ctx \p has not been
* initialized.
*/
static inline int mbedtls_cipher_get_key_bitlen( const mbedtls_cipher_context_t *ctx )
static inline int mbedtls_cipher_get_key_bitlen(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET(
ctx != NULL, MBEDTLS_KEY_LENGTH_NONE );
if( ctx->cipher_info == NULL )
return MBEDTLS_KEY_LENGTH_NONE;
return (int) ctx->cipher_info->key_bitlen;
@@ -511,14 +562,17 @@ static inline int mbedtls_cipher_get_key_bitlen( const mbedtls_cipher_context_t
/**
* \brief This function returns the operation of the given cipher.
*
* \param ctx The context of the cipher. Must be initialized.
* \param ctx The context of the cipher. This must be initialized.
*
* \return The type of operation: #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT.
* \return #MBEDTLS_OPERATION_NONE if \p ctx has not been initialized.
*/
static inline mbedtls_operation_t mbedtls_cipher_get_operation( const mbedtls_cipher_context_t *ctx )
static inline mbedtls_operation_t mbedtls_cipher_get_operation(
const mbedtls_cipher_context_t *ctx )
{
if( NULL == ctx || NULL == ctx->cipher_info )
MBEDTLS_INTERNAL_VALIDATE_RET(
ctx != NULL, MBEDTLS_OPERATION_NONE );
if( ctx->cipher_info == NULL )
return MBEDTLS_OPERATION_NONE;
return ctx->operation;
@@ -527,11 +581,11 @@ static inline mbedtls_operation_t mbedtls_cipher_get_operation( const mbedtls_ci
/**
* \brief This function sets the key to use with the given context.
*
* \param ctx The generic cipher context. May not be NULL. Must have
* been initialized using mbedtls_cipher_info_from_type()
* or mbedtls_cipher_info_from_string().
* \param key The key to use.
* \param key_bitlen The key length to use, in bits.
* \param ctx The generic cipher context. This must be initialized and
* bound to a cipher information structure.
* \param key The key to use. This must be a readable buffer of at
* least \p key_bitlen Bits.
* \param key_bitlen The key length to use, in Bits.
* \param operation The operation that the key will be used for:
* #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT.
*
@@ -540,8 +594,10 @@ static inline mbedtls_operation_t mbedtls_cipher_get_operation( const mbedtls_ci
* parameter-verification failure.
* \return A cipher-specific error code on failure.
*/
int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx, const unsigned char *key,
int key_bitlen, const mbedtls_operation_t operation );
int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx,
const unsigned char *key,
int key_bitlen,
const mbedtls_operation_t operation );
#if defined(MBEDTLS_CIPHER_MODE_WITH_PADDING)
/**
@@ -550,7 +606,8 @@ int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx, const unsigned char *k
*
* The default passing mode is PKCS7 padding.
*
* \param ctx The generic cipher context.
* \param ctx The generic cipher context. This must be initialized and
* bound to a cipher information structure.
* \param mode The padding mode.
*
* \return \c 0 on success.
@@ -559,7 +616,8 @@ int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx, const unsigned char *k
* \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if the cipher mode
* does not support padding.
*/
int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx, mbedtls_cipher_padding_t mode );
int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx,
mbedtls_cipher_padding_t mode );
#endif /* MBEDTLS_CIPHER_MODE_WITH_PADDING */
/**
@@ -569,8 +627,10 @@ int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx, mbedtls_ciph
* \note Some ciphers do not use IVs nor nonce. For these
* ciphers, this function has no effect.
*
* \param ctx The generic cipher context.
* \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
* \param ctx The generic cipher context. This must be initialized and
* bound to a cipher information structure.
* \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers. This
* must be a readable buffer of at least \p iv_len Bytes.
* \param iv_len The IV length for ciphers with variable-size IV.
* This parameter is discarded by ciphers with fixed-size IV.
*
@@ -579,12 +639,13 @@ int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx, mbedtls_ciph
* parameter-verification failure.
*/
int mbedtls_cipher_set_iv( mbedtls_cipher_context_t *ctx,
const unsigned char *iv, size_t iv_len );
const unsigned char *iv,
size_t iv_len );
/**
* \brief This function resets the cipher state.
*
* \param ctx The generic cipher context.
* \param ctx The generic cipher context. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
@@ -596,11 +657,13 @@ int mbedtls_cipher_reset( mbedtls_cipher_context_t *ctx );
/**
* \brief This function adds additional data for AEAD ciphers.
* Currently supported with GCM and ChaCha20+Poly1305.
* Must be called exactly once, after mbedtls_cipher_reset().
* This must be called exactly once, after
* mbedtls_cipher_reset().
*
* \param ctx The generic cipher context.
* \param ad The additional data to use.
* \param ad_len the Length of \p ad.
* \param ctx The generic cipher context. This must be initialized.
* \param ad The additional data to use. This must be a readable
* buffer of at least \p ad_len Bytes.
* \param ad_len the Length of \p ad Bytes.
*
* \return \c 0 on success.
* \return A specific error code on failure.
@@ -624,14 +687,17 @@ int mbedtls_cipher_update_ad( mbedtls_cipher_context_t *ctx,
* mbedtls_cipher_finish(), must have \p ilen as a
* multiple of the block size of the cipher.
*
* \param ctx The generic cipher context.
* \param input The buffer holding the input data.
* \param ctx The generic cipher context. This must be initialized and
* bound to a key.
* \param input The buffer holding the input data. This must be a
* readable buffer of at least \p ilen Bytes.
* \param ilen The length of the input data.
* \param output The buffer for the output data. Must be able to hold at
* least \p ilen + block_size. Must not be the same buffer
* as input.
* \param output The buffer for the output data. This must be able to
* hold at least `ilen + block_size`. This must not be the
* same buffer as \p input.
* \param olen The length of the output data, to be updated with the
* actual number of Bytes written.
* actual number of Bytes written. This must not be
* \c NULL.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
@@ -649,9 +715,12 @@ int mbedtls_cipher_update( mbedtls_cipher_context_t *ctx, const unsigned char *i
* contained in it is padded to the size of
* the last block, and written to the \p output buffer.
*
* \param ctx The generic cipher context.
* \param output The buffer to write data to. Needs block_size available.
* \param ctx The generic cipher context. This must be initialized and
* bound to a key.
* \param output The buffer to write data to. This needs to be a writable
* buffer of at least \p block_size Bytes.
* \param olen The length of the data written to the \p output buffer.
* This may not be \c NULL.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on
@@ -669,10 +738,14 @@ int mbedtls_cipher_finish( mbedtls_cipher_context_t *ctx,
/**
* \brief This function writes a tag for AEAD ciphers.
* Currently supported with GCM and ChaCha20+Poly1305.
* Must be called after mbedtls_cipher_finish().
* This must be called after mbedtls_cipher_finish().
*
* \param ctx The generic cipher context.
* \param tag The buffer to write the tag to.
* \param ctx The generic cipher context. This must be initialized,
* bound to a key, and have just completed a cipher
* operation through mbedtls_cipher_finish() the tag for
* which should be written.
* \param tag The buffer to write the tag to. This must be a writable
* buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to write.
*
* \return \c 0 on success.
@@ -684,10 +757,11 @@ int mbedtls_cipher_write_tag( mbedtls_cipher_context_t *ctx,
/**
* \brief This function checks the tag for AEAD ciphers.
* Currently supported with GCM and ChaCha20+Poly1305.
* Must be called after mbedtls_cipher_finish().
* This must be called after mbedtls_cipher_finish().
*
* \param ctx The generic cipher context.
* \param tag The buffer holding the tag.
* \param ctx The generic cipher context. This must be initialized.
* \param tag The buffer holding the tag. This must be a readable
* buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to check.
*
* \return \c 0 on success.
@@ -701,18 +775,22 @@ int mbedtls_cipher_check_tag( mbedtls_cipher_context_t *ctx,
* \brief The generic all-in-one encryption/decryption function,
* for all ciphers except AEAD constructs.
*
* \param ctx The generic cipher context.
* \param ctx The generic cipher context. This must be initialized.
* \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
* This must be a readable buffer of at least \p iv_len
* Bytes.
* \param iv_len The IV length for ciphers with variable-size IV.
* This parameter is discarded by ciphers with fixed-size
* IV.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param output The buffer for the output data. Must be able to hold at
* least \p ilen + block_size. Must not be the same buffer
* as input.
* \param input The buffer holding the input data. This must be a
* readable buffer of at least \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The buffer for the output data. This must be able to
* hold at least `ilen + block_size`. This must not be the
* same buffer as \p input.
* \param olen The length of the output data, to be updated with the
* actual number of Bytes written.
* actual number of Bytes written. This must not be
* \c NULL.
*
* \note Some ciphers do not use IVs nor nonce. For these
* ciphers, use \p iv = NULL and \p iv_len = 0.
@@ -735,19 +813,26 @@ int mbedtls_cipher_crypt( mbedtls_cipher_context_t *ctx,
/**
* \brief The generic autenticated encryption (AEAD) function.
*
* \param ctx The generic cipher context.
* \param ctx The generic cipher context. This must be initialized and
* bound to a key.
* \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
* This must be a readable buffer of at least \p iv_len
* Bytes.
* \param iv_len The IV length for ciphers with variable-size IV.
* This parameter is discarded by ciphers with fixed-size IV.
* \param ad The additional data to authenticate.
* \param ad The additional data to authenticate. This must be a
* readable buffer of at least \p ad_len Bytes.
* \param ad_len The length of \p ad.
* \param input The buffer holding the input data.
* \param input The buffer holding the input data. This must be a
* readable buffer of at least \p ilen Bytes.
* \param ilen The length of the input data.
* \param output The buffer for the output data.
* Must be able to hold at least \p ilen.
* \param output The buffer for the output data. This must be able to
* hold at least \p ilen Bytes.
* \param olen The length of the output data, to be updated with the
* actual number of Bytes written.
* \param tag The buffer for the authentication tag.
* actual number of Bytes written. This must not be
* \c NULL.
* \param tag The buffer for the authentication tag. This must be a
* writable buffer of at least \p tag_len Bytes.
* \param tag_len The desired length of the authentication tag.
*
* \return \c 0 on success.
@@ -769,19 +854,26 @@ int mbedtls_cipher_auth_encrypt( mbedtls_cipher_context_t *ctx,
* is zeroed out to prevent the unauthentic plaintext being
* used, making this interface safer.
*
* \param ctx The generic cipher context.
* \param ctx The generic cipher context. This must be initialized and
* and bound to a key.
* \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers.
* This must be a readable buffer of at least \p iv_len
* Bytes.
* \param iv_len The IV length for ciphers with variable-size IV.
* This parameter is discarded by ciphers with fixed-size IV.
* \param ad The additional data to be authenticated.
* \param ad The additional data to be authenticated. This must be a
* readable buffer of at least \p ad_len Bytes.
* \param ad_len The length of \p ad.
* \param input The buffer holding the input data.
* \param input The buffer holding the input data. This must be a
* readable buffer of at least \p ilen Bytes.
* \param ilen The length of the input data.
* \param output The buffer for the output data.
* Must be able to hold at least \p ilen.
* This must be able to hold at least \p ilen Bytes.
* \param olen The length of the output data, to be updated with the
* actual number of Bytes written.
* \param tag The buffer holding the authentication tag.
* actual number of Bytes written. This must not be
* \c NULL.
* \param tag The buffer holding the authentication tag. This must be
* a readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the authentication tag.
*
* \return \c 0 on success.

29
externals/mbedtls/include/mbedtls/cipher_internal.h vendored
View File

@@ -6,8 +6,31 @@
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,7 +46,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CIPHER_WRAP_H
#define MBEDTLS_CIPHER_WRAP_H

36
externals/mbedtls/include/mbedtls/cmac.h vendored
View File

@@ -7,8 +7,31 @@
* Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>.
*/
/*
* Copyright (C) 2015-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,18 +47,25 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CMAC_H
#define MBEDTLS_CMAC_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#ifdef __cplusplus
extern "C" {
#endif
/* MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED -0x007A /**< CMAC hardware accelerator failed. */
#define MBEDTLS_AES_BLOCK_SIZE 16

35
externals/mbedtls/include/mbedtls/compat-1.3.h vendored
View File

@@ -7,8 +7,31 @@
* \deprecated Use the new names directly instead
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,9 +47,15 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)

424
externals/mbedtls/include/mbedtls/config.h vendored
View File

@@ -8,8 +8,31 @@
* memory footprint.
*/
/*
* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CONFIG_H
@@ -139,12 +162,21 @@
/**
* \def MBEDTLS_HAVE_TIME_DATE
*
* System has time.h and time(), gmtime() and the clock is correct.
* The time needs to be correct (not necesarily very accurate, but at least
* System has time.h, time(), and an implementation for
* mbedtls_platform_gmtime_r() (see below).
* The time needs to be correct (not necessarily very accurate, but at least
* the date should be correct). This is used to verify the validity period of
* X.509 certificates.
*
* Comment if your system does not have a correct clock.
*
* \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that
* behaves similarly to the gmtime_r() function from the C standard. Refer to
* the documentation for mbedtls_platform_gmtime_r() for more information.
*
* \note It is possible to configure an implementation for
* mbedtls_platform_gmtime_r() at compile-time by using the macro
* MBEDTLS_PLATFORM_GMTIME_R_ALT.
*/
#define MBEDTLS_HAVE_TIME_DATE
@@ -249,6 +281,72 @@
*/
//#define MBEDTLS_DEPRECATED_REMOVED
/**
* \def MBEDTLS_CHECK_PARAMS
*
* This configuration option controls whether the library validates more of
* the parameters passed to it.
*
* When this flag is not defined, the library only attempts to validate an
* input parameter if: (1) they may come from the outside world (such as the
* network, the filesystem, etc.) or (2) not validating them could result in
* internal memory errors such as overflowing a buffer controlled by the
* library. On the other hand, it doesn't attempt to validate parameters whose
* values are fully controlled by the application (such as pointers).
*
* When this flag is defined, the library additionally attempts to validate
* parameters that are fully controlled by the application, and should always
* be valid if the application code is fully correct and trusted.
*
* For example, when a function accepts as input a pointer to a buffer that may
* contain untrusted data, and its documentation mentions that this pointer
* must not be NULL:
* - The pointer is checked to be non-NULL only if this option is enabled.
* - The content of the buffer is always validated.
*
* When this flag is defined, if a library function receives a parameter that
* is invalid:
* 1. The function will invoke the macro MBEDTLS_PARAM_FAILED().
* 2. If MBEDTLS_PARAM_FAILED() did not terminate the program, the function
* will immediately return. If the function returns an Mbed TLS error code,
* the error code in this case is MBEDTLS_ERR_xxx_BAD_INPUT_DATA.
*
* When defining this flag, you also need to arrange a definition for
* MBEDTLS_PARAM_FAILED(). You can do this by any of the following methods:
* - By default, the library defines MBEDTLS_PARAM_FAILED() to call a
* function mbedtls_param_failed(), but the library does not define this
* function. If you do not make any other arrangements, you must provide
* the function mbedtls_param_failed() in your application.
* See `platform_util.h` for its prototype.
* - If you enable the macro #MBEDTLS_CHECK_PARAMS_ASSERT, then the
* library defines #MBEDTLS_PARAM_FAILED(\c cond) to be `assert(cond)`.
* You can still supply an alternative definition of
* MBEDTLS_PARAM_FAILED(), which may call `assert`.
* - If you define a macro MBEDTLS_PARAM_FAILED() before including `config.h`
* or you uncomment the definition of MBEDTLS_PARAM_FAILED() in `config.h`,
* the library will call the macro that you defined and will not supply
* its own version. Note that if MBEDTLS_PARAM_FAILED() calls `assert`,
* you need to enable #MBEDTLS_CHECK_PARAMS_ASSERT so that library source
* files include `<assert.h>`.
*
* Uncomment to enable validation of application-controlled parameters.
*/
//#define MBEDTLS_CHECK_PARAMS
/**
* \def MBEDTLS_CHECK_PARAMS_ASSERT
*
* Allow MBEDTLS_PARAM_FAILED() to call `assert`, and make it default to
* `assert`. This macro is only used if #MBEDTLS_CHECK_PARAMS is defined.
*
* If this macro is not defined, then MBEDTLS_PARAM_FAILED() defaults to
* calling a function mbedtls_param_failed(). See the documentation of
* #MBEDTLS_CHECK_PARAMS for details.
*
* Uncomment to allow MBEDTLS_PARAM_FAILED() to call `assert`.
*/
//#define MBEDTLS_CHECK_PARAMS_ASSERT
/* \} name SECTION: System support */
/**
@@ -352,7 +450,7 @@
* \note Because of a signature change, the core AES encryption and decryption routines are
* currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt,
* respectively. When setting up alternative implementations, these functions should
* be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt
* be overridden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt
* must stay untouched.
*
* \note If you use the AES_xxx_ALT macros, then is is recommended to also set
@@ -367,6 +465,16 @@
* dependencies on them, and considering stronger message digests
* and ciphers instead.
*
* \warning If both MBEDTLS_ECDSA_SIGN_ALT and MBEDTLS_ECDSA_DETERMINISTIC are
* enabled, then the deterministic ECDH signature functions pass the
* the static HMAC-DRBG as RNG to mbedtls_ecdsa_sign(). Therefore
* alternative implementations should use the RNG only for generating
* the ephemeral key and nothing else. If this is not possible, then
* MBEDTLS_ECDSA_DETERMINISTIC should be disabled and an alternative
* implementation should be provided for mbedtls_ecdsa_sign_det_ext()
* (and for mbedtls_ecdsa_sign_det() too if backward compatibility is
* desirable).
*
*/
//#define MBEDTLS_MD2_PROCESS_ALT
//#define MBEDTLS_MD4_PROCESS_ALT
@@ -407,11 +515,11 @@
* unsigned char mbedtls_internal_ecp_grp_capable(
* const mbedtls_ecp_group *grp )
* int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp )
* void mbedtls_internal_ecp_deinit( const mbedtls_ecp_group *grp )
* void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp )
* The mbedtls_internal_ecp_grp_capable function should return 1 if the
* replacement functions implement arithmetic for the given group and 0
* otherwise.
* The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_deinit are
* The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are
* called before and after each point operation and provide an opportunity to
* implement optimized set up and tear down instructions.
*
@@ -441,6 +549,42 @@
//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT
//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
/**
* \def MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
*
* Enable testing of the constant-flow nature of some sensitive functions with
* clang's MemorySanitizer. This causes some existing tests to also test
* this non-functional property of the code under test.
*
* This setting requires compiling with clang -fsanitize=memory. The test
* suites can then be run normally.
*
* \warning This macro is only used for extended testing; it is not considered
* part of the library's API, so it may change or disappear at any time.
*
* Uncomment to enable testing of the constant-flow nature of selected code.
*/
//#define MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
/**
* \def MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
*
* Enable testing of the constant-flow nature of some sensitive functions with
* valgrind's memcheck tool. This causes some existing tests to also test
* this non-functional property of the code under test.
*
* This setting requires valgrind headers for building, and is only useful for
* testing if the tests suites are run with valgrind's memcheck. This can be
* done for an individual test suite with 'valgrind ./test_suite_xxx', or when
* using CMake, this can be done for all test suites with 'make memcheck'.
*
* \warning This macro is only used for extended testing; it is not considered
* part of the library's API, so it may change or disappear at any time.
*
* Uncomment to enable testing of the constant-flow nature of selected code.
*/
//#define MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
/**
* \def MBEDTLS_TEST_NULL_ENTROPY
*
@@ -606,6 +750,13 @@
#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
#define MBEDTLS_CIPHER_PADDING_ZEROS
/** \def MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
*
* Uncomment this macro to use a 128-bit key in the CTR_DRBG module.
* By default, CTR_DRBG uses a 256-bit key.
*/
//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
/**
* \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES
*
@@ -637,6 +788,26 @@
*/
#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES
/**
* \def MBEDTLS_REMOVE_3DES_CIPHERSUITES
*
* Remove 3DES ciphersuites by default in SSL / TLS.
* This flag removes the ciphersuites based on 3DES from the default list as
* returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible
* to enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including
* them explicitly.
*
* A man-in-the-browser attacker can recover authentication tokens sent through
* a TLS connection using a 3DES based cipher suite (see "On the Practical
* (In-)Security of 64-bit Block Ciphers" by Karthikeyan Bhargavan and Gaëtan
* Leurent, see https://sweet32.info/SWEET32_CCS16.pdf). If this attack falls
* in your threat model or you are unsure, then you should keep this option
* enabled to remove 3DES based cipher suites.
*
* Comment this macro to keep 3DES in the default ciphersuite list.
*/
#define MBEDTLS_REMOVE_3DES_CIPHERSUITES
/**
* \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
*
@@ -670,6 +841,52 @@
*/
#define MBEDTLS_ECP_NIST_OPTIM
/**
* \def MBEDTLS_ECP_NO_INTERNAL_RNG
*
* When this option is disabled, mbedtls_ecp_mul() will make use of an
* internal RNG when called with a NULL \c f_rng argument, in order to protect
* against some side-channel attacks.
*
* This protection introduces a dependency of the ECP module on one of the
* DRBG or SHA modules (HMAC-DRBG, CTR-DRBG, SHA-512 or SHA-256.) For very
* constrained applications that don't require this protection (for example,
* because you're only doing signature verification, so not manipulating any
* secret, or because local/physical side-channel attacks are outside your
* threat model), it might be desirable to get rid of that dependency.
*
* \warning Enabling this option makes some uses of ECP vulnerable to some
* side-channel attacks. Only enable it if you know that's not a problem for
* your use case.
*
* Uncomment this macro to disable some counter-measures in ECP.
*/
//#define MBEDTLS_ECP_NO_INTERNAL_RNG
/**
* \def MBEDTLS_ECP_RESTARTABLE
*
* Enable "non-blocking" ECC operations that can return early and be resumed.
*
* This allows various functions to pause by returning
* #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module,
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in
* order to further progress and eventually complete their operation. This is
* controlled through mbedtls_ecp_set_max_ops() which limits the maximum
* number of ECC operations a function may perform before pausing; see
* mbedtls_ecp_set_max_ops() for more information.
*
* This is useful in non-threaded environments if you want to avoid blocking
* for too long on ECC (and, hence, X.509 or SSL/TLS) operations.
*
* Uncomment this macro to enable restartable ECC computations.
*
* \note This option only works with the default software implementation of
* elliptic curve functionality. It is incompatible with
* MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT and MBEDTLS_ECDSA_XXX_ALT.
*/
//#define MBEDTLS_ECP_RESTARTABLE
/**
* \def MBEDTLS_ECDSA_DETERMINISTIC
*
@@ -1281,7 +1498,7 @@
/**
* \def MBEDTLS_SSL_RENEGOTIATION
*
* Disable support for TLS renegotiation.
* Enable support for TLS renegotiation.
*
* The two main uses of renegotiation are (1) refresh keys on long-lived
* connections and (2) client authentication after the initial handshake.
@@ -1465,7 +1682,7 @@
* \def MBEDTLS_SSL_SESSION_TICKETS
*
* Enable support for RFC 5077 session tickets in SSL.
* Client-side, provides full support for session tickets (maintainance of a
* Client-side, provides full support for session tickets (maintenance of a
* session store remains the responsibility of the application, though).
* Server-side, you also need to provide callbacks for writing and parsing
* tickets, including authenticated encryption and key management. Example
@@ -1529,6 +1746,23 @@
*/
//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
/**
* \def MBEDTLS_TEST_HOOKS
*
* Enable features for invasive testing such as introspection functions and
* hooks for fault injection. This enables additional unit tests.
*
* Merely enabling this feature should not change the behavior of the product.
* It only adds new code, and new branching points where the default behavior
* is the same as when this feature is disabled.
* However, this feature increases the attack surface: there is an added
* risk of vulnerabilities, and more gadgets that can make exploits easier.
* Therefore this feature must never be enabled in production.
*
* Uncomment to enable invasive tests.
*/
//#define MBEDTLS_TEST_HOOKS
/**
* \def MBEDTLS_THREADING_ALT
*
@@ -1631,7 +1865,7 @@
*
* \warning TLS-level compression MAY REDUCE SECURITY! See for example the
* CRIME attack. Before enabling this option, you should examine with care if
* CRIME or similar exploits may be a applicable to your use case.
* CRIME or similar exploits may be applicable to your use case.
*
* \note Currently compression can't be used with DTLS.
*
@@ -2020,14 +2254,20 @@
/**
* \def MBEDTLS_CTR_DRBG_C
*
* Enable the CTR_DRBG AES-256-based random generator.
* Enable the CTR_DRBG AES-based random generator.
* The CTR_DRBG generator uses AES-256 by default.
* To use AES-128 instead, enable \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY above.
*
* \note To achieve a 256-bit security strength with CTR_DRBG,
* you must use AES-256 *and* use sufficient entropy.
* See ctr_drbg.h for more details.
*
* Module: library/ctr_drbg.c
* Caller:
*
* Requires: MBEDTLS_AES_C
*
* This module provides the CTR_DRBG AES-256 random number generator.
* This module provides the CTR_DRBG AES random number generator.
*/
#define MBEDTLS_CTR_DRBG_C
@@ -2903,7 +3143,7 @@
*/
/* MPI / BIGNUM options */
//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum window size used. */
//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
/* CTR_DRBG options */
@@ -2940,7 +3180,7 @@
//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
/* Note: your snprintf must correclty zero-terminate the buffer! */
/* Note: your snprintf must correctly zero-terminate the buffer! */
//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */
@@ -2957,11 +3197,47 @@
//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */
/* Note: your snprintf must correclty zero-terminate the buffer! */
/* Note: your snprintf must correctly zero-terminate the buffer! */
//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
/**
* \brief This macro is invoked by the library when an invalid parameter
* is detected that is only checked with #MBEDTLS_CHECK_PARAMS
* (see the documentation of that option for context).
*
* When you leave this undefined here, the library provides
* a default definition. If the macro #MBEDTLS_CHECK_PARAMS_ASSERT
* is defined, the default definition is `assert(cond)`,
* otherwise the default definition calls a function
* mbedtls_param_failed(). This function is declared in
* `platform_util.h` for the benefit of the library, but
* you need to define in your application.
*
* When you define this here, this replaces the default
* definition in platform_util.h (which no longer declares the
* function mbedtls_param_failed()) and it is your responsibility
* to make sure this macro expands to something suitable (in
* particular, that all the necessary declarations are visible
* from within the library - you can ensure that by providing
* them in this file next to the macro definition).
* If you define this macro to call `assert`, also define
* #MBEDTLS_CHECK_PARAMS_ASSERT so that library source files
* include `<assert.h>`.
*
* Note that you may define this macro to expand to nothing, in
* which case you don't have to worry about declarations or
* definitions. However, you will then be notified about invalid
* parameters only in non-void functions, and void function will
* just silently return early on invalid parameters, which
* partially negates the benefits of enabling
* #MBEDTLS_CHECK_PARAMS in the first place, so is discouraged.
*
* \param cond The expression that should evaluate to true, but doesn't.
*/
//#define MBEDTLS_PARAM_FAILED( cond ) assert( cond )
/* SSL Cache options */
//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
@@ -2970,31 +3246,65 @@
/** \def MBEDTLS_SSL_MAX_CONTENT_LEN
*
* Maximum fragment length in bytes.
* Maximum length (in bytes) of incoming and outgoing plaintext fragments.
*
* Determines the size of both the incoming and outgoing TLS I/O buffers.
* This determines the size of both the incoming and outgoing TLS I/O buffers
* in such a way that both are capable of holding the specified amount of
* plaintext data, regardless of the protection mechanism used.
*
* Uncommenting MBEDTLS_SSL_IN_CONTENT_LEN and/or MBEDTLS_SSL_OUT_CONTENT_LEN
* will override this length by setting maximum incoming and/or outgoing
* fragment length, respectively.
* To configure incoming and outgoing I/O buffers separately, use
* #MBEDTLS_SSL_IN_CONTENT_LEN and #MBEDTLS_SSL_OUT_CONTENT_LEN,
* which overwrite the value set by this option.
*
* \note When using a value less than the default of 16KB on the client, it is
* recommended to use the Maximum Fragment Length (MFL) extension to
* inform the server about this limitation. On the server, there
* is no supported, standardized way of informing the client about
* restriction on the maximum size of incoming messages, and unless
* the limitation has been communicated by other means, it is recommended
* to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN
* while keeping the default value of 16KB for the incoming buffer.
*
* Uncomment to set the maximum plaintext size of both
* incoming and outgoing I/O buffers.
*/
//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384
/** \def MBEDTLS_SSL_IN_CONTENT_LEN
*
* Maximum incoming fragment length in bytes.
* Maximum length (in bytes) of incoming plaintext fragments.
*
* Uncomment to set the size of the inward TLS buffer independently of the
* outward buffer.
* This determines the size of the incoming TLS I/O buffer in such a way
* that it is capable of holding the specified amount of plaintext data,
* regardless of the protection mechanism used.
*
* If this option is undefined, it inherits its value from
* #MBEDTLS_SSL_MAX_CONTENT_LEN.
*
* \note When using a value less than the default of 16KB on the client, it is
* recommended to use the Maximum Fragment Length (MFL) extension to
* inform the server about this limitation. On the server, there
* is no supported, standardized way of informing the client about
* restriction on the maximum size of incoming messages, and unless
* the limitation has been communicated by other means, it is recommended
* to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN
* while keeping the default value of 16KB for the incoming buffer.
*
* Uncomment to set the maximum plaintext size of the incoming I/O buffer
* independently of the outgoing I/O buffer.
*/
//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384
/** \def MBEDTLS_SSL_OUT_CONTENT_LEN
*
* Maximum outgoing fragment length in bytes.
* Maximum length (in bytes) of outgoing plaintext fragments.
*
* Uncomment to set the size of the outward TLS buffer independently of the
* inward buffer.
* This determines the size of the outgoing TLS I/O buffer in such a way
* that it is capable of holding the specified amount of plaintext data,
* regardless of the protection mechanism used.
*
* If this option undefined, it inherits its value from
* #MBEDTLS_SSL_MAX_CONTENT_LEN.
*
* It is possible to save RAM by setting a smaller outward buffer, while keeping
* the default inward 16384 byte buffer to conform to the TLS specification.
@@ -3004,14 +3314,28 @@
* The specific size requirement depends on the configured ciphers and any
* certificate data which is sent during the handshake.
*
* For absolute minimum RAM usage, it's best to enable
* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH and reduce MBEDTLS_SSL_MAX_CONTENT_LEN. This
* reduces both incoming and outgoing buffer sizes. However this is only
* guaranteed if the other end of the connection also supports the TLS
* max_fragment_len extension. Otherwise the connection may fail.
* Uncomment to set the maximum plaintext size of the outgoing I/O buffer
* independently of the incoming I/O buffer.
*/
//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384
/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING
*
* Maximum number of heap-allocated bytes for the purpose of
* DTLS handshake message reassembly and future message buffering.
*
* This should be at least 9/8 * MBEDTLSSL_IN_CONTENT_LEN
* to account for a reassembled handshake message of maximum size,
* together with its reassembly bitmap.
*
* A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default)
* should be sufficient for all practical situations as it allows
* to reassembly a large handshake message (such as a certificate)
* while buffering multiple smaller handshake messages.
*
*/
//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768
//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
@@ -3085,25 +3409,33 @@
*/
//#define MBEDTLS_PLATFORM_ZEROIZE_ALT
/**
* Uncomment the macro to let Mbed TLS use your alternate implementation of
* mbedtls_platform_gmtime_r(). This replaces the default implementation in
* platform_util.c.
*
* gmtime() is not a thread-safe function as defined in the C standard. The
* library will try to use safer implementations of this function, such as
* gmtime_r() when available. However, if Mbed TLS cannot identify the target
* system, the implementation of mbedtls_platform_gmtime_r() will default to
* using the standard gmtime(). In this case, calls from the library to
* gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex
* if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the
* library are also guarded with this mutex to avoid race conditions. However,
* if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will
* unconditionally use the implementation for mbedtls_platform_gmtime_r()
* supplied at compile time.
*/
//#define MBEDTLS_PLATFORM_GMTIME_R_ALT
/* \} name SECTION: Customisation configuration options */
/* Target and application specific configurations */
//#define YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE "target_config.h"
#if defined(TARGET_LIKE_MBED) && defined(YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE)
#include YOTTA_CFG_MBEDTLS_TARGET_CONFIG_FILE
#endif
/*
/* Target and application specific configurations
*
* Allow user to override any previous default.
*
* Use two macro names for that, as:
* - with yotta the prefix YOTTA_CFG_ is forced
* - without yotta is looks weird to have a YOTTA prefix.
*/
#if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE)
#include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE
#elif defined(MBEDTLS_USER_CONFIG_FILE)
#if defined(MBEDTLS_USER_CONFIG_FILE)
#include MBEDTLS_USER_CONFIG_FILE
#endif

354
externals/mbedtls/include/mbedtls/ctr_drbg.h vendored
View File

@@ -1,19 +1,68 @@
/**
* \file ctr_drbg.h
*
* \brief This file contains CTR_DRBG definitions and functions.
* \brief This file contains definitions and functions for the
* CTR_DRBG pseudorandom generator.
*
* CTR_DRBG is a standardized way of building a PRNG from a block-cipher
* in counter mode operation, as defined in <em>NIST SP 800-90A:
* Recommendation for Random Number Generation Using Deterministic Random
* Bit Generators</em>.
*
* The Mbed TLS implementation of CTR_DRBG uses AES-256 as the underlying
* block cipher.
* The Mbed TLS implementation of CTR_DRBG uses AES-256 (default) or AES-128
* (if \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled at compile time)
* as the underlying block cipher, with a derivation function.
* The initial seeding grabs #MBEDTLS_CTR_DRBG_ENTROPY_LEN bytes of entropy.
* See the documentation of mbedtls_ctr_drbg_seed() for more details.
*
* Based on NIST SP 800-90A §10.2.1 table 3 and NIST SP 800-57 part 1 table 2,
* here are the security strengths achieved in typical configuration:
* - 256 bits under the default configuration of the library, with AES-256
* and with #MBEDTLS_CTR_DRBG_ENTROPY_LEN set to 48 or more.
* - 256 bits if AES-256 is used, #MBEDTLS_CTR_DRBG_ENTROPY_LEN is set
* to 32 or more, and the DRBG is initialized with an explicit
* nonce in the \c custom parameter to mbedtls_ctr_drbg_seed().
* - 128 bits if AES-256 is used but #MBEDTLS_CTR_DRBG_ENTROPY_LEN is
* between 24 and 47 and the DRBG is not initialized with an explicit
* nonce (see mbedtls_ctr_drbg_seed()).
* - 128 bits if AES-128 is used (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY enabled)
* and #MBEDTLS_CTR_DRBG_ENTROPY_LEN is set to 24 or more (which is
* always the case unless it is explicitly set to a different value
* in config.h).
*
* Note that the value of #MBEDTLS_CTR_DRBG_ENTROPY_LEN defaults to:
* - \c 48 if the module \c MBEDTLS_SHA512_C is enabled and the symbol
* \c MBEDTLS_ENTROPY_FORCE_SHA256 is disabled at compile time.
* This is the default configuration of the library.
* - \c 32 if the module \c MBEDTLS_SHA512_C is disabled at compile time.
* - \c 32 if \c MBEDTLS_ENTROPY_FORCE_SHA256 is enabled at compile time.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,12 +78,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_CTR_DRBG_H
#define MBEDTLS_CTR_DRBG_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "aes.h"
#if defined(MBEDTLS_THREADING_C)
@@ -47,7 +102,23 @@
#define MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR -0x003A /**< Read or write error in file. */
#define MBEDTLS_CTR_DRBG_BLOCKSIZE 16 /**< The block size used by the cipher. */
#define MBEDTLS_CTR_DRBG_KEYSIZE 32 /**< The key size used by the cipher. */
#if defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
#define MBEDTLS_CTR_DRBG_KEYSIZE 16
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 16 bytes (128 bits)
* because #MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
*/
#else
#define MBEDTLS_CTR_DRBG_KEYSIZE 32
/**< The key size in bytes used by the cipher.
*
* Compile-time choice: 32 bytes (256 bits)
* because \c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled.
*/
#endif
#define MBEDTLS_CTR_DRBG_KEYBITS ( MBEDTLS_CTR_DRBG_KEYSIZE * 8 ) /**< The key size for the DRBG operation, in bits. */
#define MBEDTLS_CTR_DRBG_SEEDLEN ( MBEDTLS_CTR_DRBG_KEYSIZE + MBEDTLS_CTR_DRBG_BLOCKSIZE ) /**< The seed length, calculated as (counter + AES key). */
@@ -60,21 +131,31 @@
* \{
*/
/** \def MBEDTLS_CTR_DRBG_ENTROPY_LEN
*
* \brief The amount of entropy used per seed by default, in bytes.
*/
#if !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN)
#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
/** This is 48 bytes because the entropy module uses SHA-512
* (\c MBEDTLS_ENTROPY_FORCE_SHA256 is disabled).
*/
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48
/**< The amount of entropy used per seed by default:
* <ul><li>48 with SHA-512.</li>
* <li>32 with SHA-256.</li></ul>
#else /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
/** This is 32 bytes because the entropy module uses SHA-256
* (the SHA512 module is disabled or
* \c MBEDTLS_ENTROPY_FORCE_SHA256 is enabled).
*/
#else
#if !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY)
/** \warning To achieve a 256-bit security strength, you must pass a nonce
* to mbedtls_ctr_drbg_seed().
*/
#endif /* !defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) */
#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 32
/**< Amount of entropy used per seed by default:
* <ul><li>48 with SHA-512.</li>
* <li>32 with SHA-256.</li></ul>
*/
#endif
#endif
#endif /* defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) */
#endif /* !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) */
#if !defined(MBEDTLS_CTR_DRBG_RESEED_INTERVAL)
#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000
@@ -93,7 +174,7 @@
#if !defined(MBEDTLS_CTR_DRBG_MAX_SEED_INPUT)
#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384
/**< The maximum size of seed or reseed buffer. */
/**< The maximum size of seed or reseed buffer in bytes. */
#endif
/* \} name SECTION: Module settings */
@@ -110,7 +191,7 @@ extern "C" {
/**
* \brief The CTR_DRBG context structure.
*/
typedef struct
typedef struct mbedtls_ctr_drbg_context
{
unsigned char counter[16]; /*!< The counter (V). */
int reseed_counter; /*!< The reseed counter. */
@@ -133,6 +214,13 @@ typedef struct
void *p_entropy; /*!< The context for the entropy function. */
#if defined(MBEDTLS_THREADING_C)
/* Invariant: the mutex is initialized if and only if f_entropy != NULL.
* This means that the mutex is initialized during the initial seeding
* in mbedtls_ctr_drbg_seed() and freed in mbedtls_ctr_drbg_free().
*
* Note that this invariant may change without notice. Do not rely on it
* and do not access the mutex directly in application code.
*/
mbedtls_threading_mutex_t mutex;
#endif
}
@@ -143,6 +231,11 @@ mbedtls_ctr_drbg_context;
* and prepares it for mbedtls_ctr_drbg_seed()
* or mbedtls_ctr_drbg_free().
*
* \note The reseed interval is
* #MBEDTLS_CTR_DRBG_RESEED_INTERVAL by default.
* You can override it by calling
* mbedtls_ctr_drbg_set_reseed_interval().
*
* \param ctx The CTR_DRBG context to initialize.
*/
void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx );
@@ -151,17 +244,79 @@ void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx );
* \brief This function seeds and sets up the CTR_DRBG
* entropy source for future reseeds.
*
* \note Personalization data can be provided in addition to the more generic
* entropy source, to make this instantiation as unique as possible.
* A typical choice for the \p f_entropy and \p p_entropy parameters is
* to use the entropy module:
* - \p f_entropy is mbedtls_entropy_func();
* - \p p_entropy is an instance of ::mbedtls_entropy_context initialized
* with mbedtls_entropy_init() (which registers the platform's default
* entropy sources).
*
* The entropy length is #MBEDTLS_CTR_DRBG_ENTROPY_LEN by default.
* You can override it by calling mbedtls_ctr_drbg_set_entropy_len().
*
* You can provide a personalization string in addition to the
* entropy source, to make this instantiation as unique as possible.
*
* \note The _seed_material_ value passed to the derivation
* function in the CTR_DRBG Instantiate Process
* described in NIST SP 800-90A §10.2.1.3.2
* is the concatenation of the string obtained from
* calling \p f_entropy and the \p custom string.
* The origin of the nonce depends on the value of
* the entropy length relative to the security strength.
* - If the entropy length is at least 1.5 times the
* security strength then the nonce is taken from the
* string obtained with \p f_entropy.
* - If the entropy length is less than the security
* strength, then the nonce is taken from \p custom.
* In this case, for compliance with SP 800-90A,
* you must pass a unique value of \p custom at
* each invocation. See SP 800-90A §8.6.7 for more
* details.
*/
#if MBEDTLS_CTR_DRBG_ENTROPY_LEN < MBEDTLS_CTR_DRBG_KEYSIZE * 3 / 2
/** \warning When #MBEDTLS_CTR_DRBG_ENTROPY_LEN is less than
* #MBEDTLS_CTR_DRBG_KEYSIZE * 3 / 2, to achieve the
* maximum security strength permitted by CTR_DRBG,
* you must pass a value of \p custom that is a nonce:
* this value must never be repeated in subsequent
* runs of the same application or on a different
* device.
*/
#endif
#if defined(MBEDTLS_THREADING_C)
/**
* \note When Mbed TLS is built with threading support,
* after this function returns successfully,
* it is safe to call mbedtls_ctr_drbg_random()
* from multiple threads. Other operations, including
* reseeding, are not thread-safe.
*/
#endif /* MBEDTLS_THREADING_C */
/**
* \param ctx The CTR_DRBG context to seed.
* It must have been initialized with
* mbedtls_ctr_drbg_init().
* After a successful call to mbedtls_ctr_drbg_seed(),
* you may not call mbedtls_ctr_drbg_seed() again on
* the same context unless you call
* mbedtls_ctr_drbg_free() and mbedtls_ctr_drbg_init()
* again first.
* After a failed call to mbedtls_ctr_drbg_seed(),
* you must call mbedtls_ctr_drbg_free().
* \param f_entropy The entropy callback, taking as arguments the
* \p p_entropy context, the buffer to fill, and the
length of the buffer.
* \param p_entropy The entropy context.
* \param custom Personalization data, that is device-specific
identifiers. Can be NULL.
* \param len The length of the personalization data.
* length of the buffer.
* \p f_entropy is always called with a buffer size
* equal to the entropy length.
* \param p_entropy The entropy context to pass to \p f_entropy.
* \param custom The personalization string.
* This can be \c NULL, in which case the personalization
* string is empty regardless of the value of \p len.
* \param len The length of the personalization string.
* This must be at most
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT
* - #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
@@ -173,7 +328,8 @@ int mbedtls_ctr_drbg_seed( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief This function clears CTR_CRBG context data.
* \brief This function resets CTR_DRBG context to the state immediately
* after initial call of mbedtls_ctr_drbg_init().
*
* \param ctx The CTR_DRBG context to clear.
*/
@@ -184,7 +340,8 @@ void mbedtls_ctr_drbg_free( mbedtls_ctr_drbg_context *ctx );
* The default value is off.
*
* \note If enabled, entropy is gathered at the beginning of
* every call to mbedtls_ctr_drbg_random_with_add().
* every call to mbedtls_ctr_drbg_random_with_add()
* or mbedtls_ctr_drbg_random().
* Only use this if your entropy source has sufficient
* throughput.
*
@@ -196,18 +353,37 @@ void mbedtls_ctr_drbg_set_prediction_resistance( mbedtls_ctr_drbg_context *ctx,
/**
* \brief This function sets the amount of entropy grabbed on each
* seed or reseed. The default value is
* #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
* seed or reseed.
*
* The default value is #MBEDTLS_CTR_DRBG_ENTROPY_LEN.
*
* \note The security strength of CTR_DRBG is bounded by the
* entropy length. Thus:
* - When using AES-256
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled,
* which is the default),
* \p len must be at least 32 (in bytes)
* to achieve a 256-bit strength.
* - When using AES-128
* (\c MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled)
* \p len must be at least 16 (in bytes)
* to achieve a 128-bit strength.
*
* \param ctx The CTR_DRBG context.
* \param len The amount of entropy to grab.
* \param len The amount of entropy to grab, in bytes.
* This must be at most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
*/
void mbedtls_ctr_drbg_set_entropy_len( mbedtls_ctr_drbg_context *ctx,
size_t len );
/**
* \brief This function sets the reseed interval.
* The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
*
* The reseed interval is the number of calls to mbedtls_ctr_drbg_random()
* or mbedtls_ctr_drbg_random_with_add() after which the entropy function
* is called again.
*
* The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
*
* \param ctx The CTR_DRBG context.
* \param interval The reseed interval.
@@ -219,9 +395,18 @@ void mbedtls_ctr_drbg_set_reseed_interval( mbedtls_ctr_drbg_context *ctx,
* \brief This function reseeds the CTR_DRBG context, that is
* extracts data from the entropy source.
*
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \param ctx The CTR_DRBG context.
* \param additional Additional data to add to the state. Can be NULL.
* \param additional Additional data to add to the state. Can be \c NULL.
* \param len The length of the additional data.
* This must be less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure.
@@ -232,31 +417,53 @@ int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx,
/**
* \brief This function updates the state of the CTR_DRBG context.
*
* \note If \p add_len is greater than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT, only the first
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT Bytes are used.
* The remaining Bytes are silently discarded.
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \param ctx The CTR_DRBG context.
* \param additional The data to update the state with.
* \param add_len Length of \p additional data.
* \param additional The data to update the state with. This must not be
* \c NULL unless \p add_len is \c 0.
* \param add_len Length of \p additional in bytes. This must be at
* most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if
* \p add_len is more than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT.
* \return An error from the underlying AES cipher on failure.
*/
void mbedtls_ctr_drbg_update( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional, size_t add_len );
int mbedtls_ctr_drbg_update_ret( mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional,
size_t add_len );
/**
* \brief This function updates a CTR_DRBG instance with additional
* data and uses it to generate random data.
*
* \note The function automatically reseeds if the reseed counter is exceeded.
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer.
* \param additional Additional data to update. Can be NULL.
* \param add_len The length of the additional data.
* \param output_len The length of the buffer in bytes.
* \param additional Additional data to update. Can be \c NULL, in which
* case the additional data is empty regardless of
* the value of \p add_len.
* \param add_len The length of the additional data
* if \p additional is not \c NULL.
* This must be less than #MBEDTLS_CTR_DRBG_MAX_INPUT
* and less than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT - \c entropy_len
* where \c entropy_len is the entropy length
* configured for the context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
@@ -269,12 +476,22 @@ int mbedtls_ctr_drbg_random_with_add( void *p_rng,
/**
* \brief This function uses CTR_DRBG to generate random data.
*
* \note The function automatically reseeds if the reseed counter is exceeded.
*
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*/
#if defined(MBEDTLS_THREADING_C)
/**
* \note When Mbed TLS is built with threading support,
* it is safe to call mbedtls_ctr_drbg_random()
* from multiple threads. Other operations, including
* reseeding, are not thread-safe.
*/
#endif /* MBEDTLS_THREADING_C */
/**
* \param p_rng The CTR_DRBG context. This must be a pointer to a
* #mbedtls_ctr_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer.
* \param output_len The length of the buffer in bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
@@ -283,6 +500,35 @@ int mbedtls_ctr_drbg_random_with_add( void *p_rng,
int mbedtls_ctr_drbg_random( void *p_rng,
unsigned char *output, size_t output_len );
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function updates the state of the CTR_DRBG context.
*
* \deprecated Superseded by mbedtls_ctr_drbg_update_ret()
* in 2.16.0.
*
* \note If \p add_len is greater than
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT, only the first
* #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT Bytes are used.
* The remaining Bytes are silently discarded.
*
* \param ctx The CTR_DRBG context.
* \param additional The data to update the state with.
* \param add_len Length of \p additional data.
*/
MBEDTLS_DEPRECATED void mbedtls_ctr_drbg_update(
mbedtls_ctr_drbg_context *ctx,
const unsigned char *additional,
size_t add_len );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_FS_IO)
/**
* \brief This function writes a seed file.
@@ -292,7 +538,7 @@ int mbedtls_ctr_drbg_random( void *p_rng,
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on reseed
* failure.
*/
int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
@@ -306,12 +552,16 @@ int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or
* #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG on failure.
* \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on
* reseed failure.
* \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if the existing
* seed file is too large.
*/
int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The CTR_DRBG checkup routine.
*
@@ -320,6 +570,8 @@ int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char
*/
int mbedtls_ctr_drbg_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
/* Internal functions (do not call directly) */
int mbedtls_ctr_drbg_seed_entropy_len( mbedtls_ctr_drbg_context *,
int (*)(void *, unsigned char *, size_t), void *,

65
externals/mbedtls/include/mbedtls/debug.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Functions for controlling and providing debug output from the library.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_DEBUG_H
#define MBEDTLS_DEBUG_H
@@ -67,6 +90,11 @@
mbedtls_debug_print_crt( ssl, level, __FILE__, __LINE__, text, crt )
#endif
#if defined(MBEDTLS_ECDH_C)
#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) \
mbedtls_debug_printf_ecdh( ssl, level, __FILE__, __LINE__, ecdh, attr )
#endif
#else /* MBEDTLS_DEBUG_C */
#define MBEDTLS_SSL_DEBUG_MSG( level, args ) do { } while( 0 )
@@ -75,6 +103,7 @@
#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) do { } while( 0 )
#endif /* MBEDTLS_DEBUG_C */
@@ -223,6 +252,36 @@ void mbedtls_debug_print_crt( const mbedtls_ssl_context *ssl, int level,
const char *text, const mbedtls_x509_crt *crt );
#endif
#if defined(MBEDTLS_ECDH_C)
typedef enum
{
MBEDTLS_DEBUG_ECDH_Q,
MBEDTLS_DEBUG_ECDH_QP,
MBEDTLS_DEBUG_ECDH_Z,
} mbedtls_debug_ecdh_attr;
/**
* \brief Print a field of the ECDH structure in the SSL context to the debug
* output. This function is always used through the
* MBEDTLS_SSL_DEBUG_ECDH() macro, which supplies the ssl context, file
* and line number parameters.
*
* \param ssl SSL context
* \param level error level of the debug message
* \param file file the error has occurred in
* \param line line number the error has occurred in
* \param ecdh the ECDH context
* \param attr the identifier of the attribute being output
*
* \attention This function is intended for INTERNAL usage within the
* library only.
*/
void mbedtls_debug_printf_ecdh( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const mbedtls_ecdh_context *ecdh,
mbedtls_debug_ecdh_attr attr );
#endif
#ifdef __cplusplus
}
#endif

39
externals/mbedtls/include/mbedtls/des.h vendored
View File

@@ -8,8 +8,31 @@
* instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*
*/
#ifndef MBEDTLS_DES_H
@@ -44,6 +67,8 @@
#define MBEDTLS_DES_DECRYPT 0
#define MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH -0x0032 /**< The data input has an invalid length. */
/* MBEDTLS_ERR_DES_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_DES_HW_ACCEL_FAILED -0x0033 /**< DES hardware accelerator failed. */
#define MBEDTLS_DES_KEY_SIZE 8
@@ -63,7 +88,7 @@ extern "C" {
* security risk. We recommend considering stronger ciphers
* instead.
*/
typedef struct
typedef struct mbedtls_des_context
{
uint32_t sk[32]; /*!< DES subkeys */
}
@@ -72,7 +97,7 @@ mbedtls_des_context;
/**
* \brief Triple-DES context structure
*/
typedef struct
typedef struct mbedtls_des3_context
{
uint32_t sk[96]; /*!< 3DES subkeys */
}
@@ -338,6 +363,8 @@ int mbedtls_des3_crypt_cbc( mbedtls_des3_context *ctx,
void mbedtls_des_setkey( uint32_t SK[32],
const unsigned char key[MBEDTLS_DES_KEY_SIZE] );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -345,6 +372,8 @@ void mbedtls_des_setkey( uint32_t SK[32],
*/
int mbedtls_des_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

204
externals/mbedtls/include/mbedtls/dhm.h vendored
View File

@@ -44,8 +44,31 @@
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -61,7 +84,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_DHM_H
@@ -86,7 +109,10 @@
#define MBEDTLS_ERR_DHM_INVALID_FORMAT -0x3380 /**< The ASN.1 data is not formatted correctly. */
#define MBEDTLS_ERR_DHM_ALLOC_FAILED -0x3400 /**< Allocation of memory failed. */
#define MBEDTLS_ERR_DHM_FILE_IO_ERROR -0x3480 /**< Read or write of file failed. */
/* MBEDTLS_ERR_DHM_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_DHM_HW_ACCEL_FAILED -0x3500 /**< DHM hardware accelerator failed. */
#define MBEDTLS_ERR_DHM_SET_GROUP_FAILED -0x3580 /**< Setting the modulus and generator failed. */
#ifdef __cplusplus
@@ -98,7 +124,7 @@ extern "C" {
/**
* \brief The DHM context structure.
*/
typedef struct
typedef struct mbedtls_dhm_context
{
size_t len; /*!< The size of \p P in Bytes. */
mbedtls_mpi P; /*!< The prime modulus. */
@@ -126,9 +152,15 @@ mbedtls_dhm_context;
void mbedtls_dhm_init( mbedtls_dhm_context *ctx );
/**
* \brief This function parses the ServerKeyExchange parameters.
* \brief This function parses the DHM parameters in a
* TLS ServerKeyExchange handshake message
* (DHM modulus, generator, and public key).
*
* \param ctx The DHM context.
* \note In a TLS handshake, this is the how the client
* sets up its DHM context from the server's public
* DHM key material.
*
* \param ctx The DHM context to use. This must be initialized.
* \param p On input, *p must be the start of the input buffer.
* On output, *p is updated to point to the end of the data
* that has been read. On success, this is the first byte
@@ -142,31 +174,37 @@ void mbedtls_dhm_init( mbedtls_dhm_context *ctx );
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
*/
int mbedtls_dhm_read_params( mbedtls_dhm_context *ctx,
unsigned char **p,
const unsigned char *end );
unsigned char **p,
const unsigned char *end );
/**
* \brief This function sets up and writes the ServerKeyExchange
* parameters.
* \brief This function generates a DHM key pair and exports its
* public part together with the DHM parameters in the format
* used in a TLS ServerKeyExchange handshake message.
*
* \note The destination buffer must be large enough to hold
* the reduced binary presentation of the modulus, the generator
* and the public key, each wrapped with a 2-byte length field.
* It is the responsibility of the caller to ensure that enough
* space is available. Refer to \c mbedtls_mpi_size to computing
* the byte-size of an MPI.
*
* \note This function assumes that \c ctx->P and \c ctx->G
* have already been properly set. For that, use
* \note This function assumes that the DHM parameters \c ctx->P
* and \c ctx->G have already been properly set. For that, use
* mbedtls_dhm_set_group() below in conjunction with
* mbedtls_mpi_read_binary() and mbedtls_mpi_read_string().
*
* \param ctx The DHM context.
* \note In a TLS handshake, this is the how the server generates
* and exports its DHM key material.
*
* \param ctx The DHM context to use. This must be initialized
* and have the DHM parameters set. It may or may not
* already have imported the peer's public key.
* \param x_size The private key size in Bytes.
* \param olen The number of characters written.
* \param output The destination buffer.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param olen The address at which to store the number of Bytes
* written on success. This must not be \c NULL.
* \param output The destination buffer. This must be a writable buffer of
* sufficient size to hold the reduced binary presentation of
* the modulus, the generator and the public key, each wrapped
* with a 2-byte length field. It is the responsibility of the
* caller to ensure that enough space is available. Refer to
* mbedtls_mpi_size() to computing the byte-size of an MPI.
* \param f_rng The RNG function. Must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng doesn't need a context parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -179,12 +217,14 @@ int mbedtls_dhm_make_params( mbedtls_dhm_context *ctx, int x_size,
/**
* \brief This function sets the prime modulus and generator.
*
* \note This function can be used to set \p P, \p G
* \note This function can be used to set \c ctx->P, \c ctx->G
* in preparation for mbedtls_dhm_make_params().
*
* \param ctx The DHM context.
* \param P The MPI holding the DHM prime modulus.
* \param G The MPI holding the DHM generator.
* \param ctx The DHM context to configure. This must be initialized.
* \param P The MPI holding the DHM prime modulus. This must be
* an initialized MPI.
* \param G The MPI holding the DHM generator. This must be an
* initialized MPI.
*
* \return \c 0 if successful.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -194,11 +234,17 @@ int mbedtls_dhm_set_group( mbedtls_dhm_context *ctx,
const mbedtls_mpi *G );
/**
* \brief This function imports the public value of the peer, G^Y.
* \brief This function imports the raw public value of the peer.
*
* \param ctx The DHM context.
* \param input The input buffer containing the G^Y value of the peer.
* \param ilen The size of the input buffer.
* \note In a TLS handshake, this is the how the server imports
* the Client's public DHM key.
*
* \param ctx The DHM context to use. This must be initialized and have
* its DHM parameters set, e.g. via mbedtls_dhm_set_group().
* It may or may not already have generated its own private key.
* \param input The input buffer containing the \c G^Y value of the peer.
* This must be a readable buffer of size \p ilen Bytes.
* \param ilen The size of the input buffer \p input in Bytes.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -207,21 +253,25 @@ int mbedtls_dhm_read_public( mbedtls_dhm_context *ctx,
const unsigned char *input, size_t ilen );
/**
* \brief This function creates its own private key, \c X, and
* exports \c G^X.
* \brief This function creates a DHM key pair and exports
* the raw public key in big-endian format.
*
* \note The destination buffer is always fully written
* so as to contain a big-endian representation of G^X mod P.
* If it is larger than ctx->len, it is padded accordingly
* If it is larger than \c ctx->len, it is padded accordingly
* with zero-bytes at the beginning.
*
* \param ctx The DHM context.
* \param ctx The DHM context to use. This must be initialized and
* have the DHM parameters set. It may or may not already
* have imported the peer's public key.
* \param x_size The private key size in Bytes.
* \param output The destination buffer.
* \param olen The length of the destination buffer. Must be at least
* equal to ctx->len (the size of \c P).
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param output The destination buffer. This must be a writable buffer of
* size \p olen Bytes.
* \param olen The length of the destination buffer. This must be at least
* equal to `ctx->len` (the size of \c P).
* \param f_rng The RNG function. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL
* if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -232,22 +282,27 @@ int mbedtls_dhm_make_public( mbedtls_dhm_context *ctx, int x_size,
void *p_rng );
/**
* \brief This function derives and exports the shared secret
* \c (G^Y)^X mod \c P.
* \brief This function derives and exports the shared secret
* \c (G^Y)^X mod \c P.
*
* \note If \p f_rng is not NULL, it is used to blind the input as
* a countermeasure against timing attacks. Blinding is used
* only if our private key \c X is re-used, and not used
* otherwise. We recommend always passing a non-NULL
* \p f_rng argument.
* \note If \p f_rng is not \c NULL, it is used to blind the input as
* a countermeasure against timing attacks. Blinding is used
* only if our private key \c X is re-used, and not used
* otherwise. We recommend always passing a non-NULL
* \p f_rng argument.
*
* \param ctx The DHM context.
* \param output The destination buffer.
* \param output_size The size of the destination buffer. Must be at least
* the size of ctx->len (the size of \c P).
* \param ctx The DHM context to use. This must be initialized
* and have its own private key generated and the peer's
* public key imported.
* \param output The buffer to write the generated shared key to. This
* must be a writable buffer of size \p output_size Bytes.
* \param output_size The size of the destination buffer. This must be at
* least the size of \c ctx->len (the size of \c P).
* \param olen On exit, holds the actual number of Bytes written.
* \param f_rng The RNG function, for blinding purposes.
* \param p_rng The RNG context.
* \param f_rng The RNG function, for blinding purposes. This may
* b \c NULL if blinding isn't needed.
* \param p_rng The RNG context. This may be \c NULL if \p f_rng
* doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX error code on failure.
@@ -258,9 +313,12 @@ int mbedtls_dhm_calc_secret( mbedtls_dhm_context *ctx,
void *p_rng );
/**
* \brief This function frees and clears the components of a DHM context.
* \brief This function frees and clears the components
* of a DHM context.
*
* \param ctx The DHM context to free and clear.
* \param ctx The DHM context to free and clear. This may be \c NULL,
* in which case this function is a no-op. If it is not \c NULL,
* it must point to an initialized DHM context.
*/
void mbedtls_dhm_free( mbedtls_dhm_context *ctx );
@@ -269,17 +327,19 @@ void mbedtls_dhm_free( mbedtls_dhm_context *ctx );
/**
* \brief This function parses DHM parameters in PEM or DER format.
*
* \param dhm The DHM context to initialize.
* \param dhmin The input buffer.
* \param dhminlen The size of the buffer, including the terminating null
* Byte for PEM data.
* \param dhm The DHM context to import the DHM parameters into.
* This must be initialized.
* \param dhmin The input buffer. This must be a readable buffer of
* length \p dhminlen Bytes.
* \param dhminlen The size of the input buffer \p dhmin, including the
* terminating \c NULL Byte for PEM data.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
* error code on failure.
* \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error
* code on failure.
*/
int mbedtls_dhm_parse_dhm( mbedtls_dhm_context *dhm, const unsigned char *dhmin,
size_t dhminlen );
size_t dhminlen );
#if defined(MBEDTLS_FS_IO)
/** \ingroup x509_module */
@@ -287,16 +347,20 @@ int mbedtls_dhm_parse_dhm( mbedtls_dhm_context *dhm, const unsigned char *dhmin,
* \brief This function loads and parses DHM parameters from a file.
*
* \param dhm The DHM context to load the parameters to.
* This must be initialized.
* \param path The filename to read the DHM parameters from.
* This must not be \c NULL.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error code
* error code on failure.
* \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX
* error code on failure.
*/
int mbedtls_dhm_parse_dhmfile( mbedtls_dhm_context *dhm, const char *path );
#endif /* MBEDTLS_FS_IO */
#endif /* MBEDTLS_ASN1_PARSE_C */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The DMH checkup routine.
*
@@ -305,6 +369,7 @@ int mbedtls_dhm_parse_dhmfile( mbedtls_dhm_context *dhm, const char *path );
*/
int mbedtls_dhm_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif
@@ -352,15 +417,6 @@ int mbedtls_dhm_self_test( int verbose );
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
MBEDTLS_DEPRECATED typedef char const * mbedtls_deprecated_constant_t;
#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) \
( (mbedtls_deprecated_constant_t) ( VAL ) )
#else
#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) VAL
#endif /* ! MBEDTLS_DEPRECATED_WARNING */
/**
* \warning The origin of the primes in RFC 5114 is not documented and
* their use therefore constitutes a security risk!

327
externals/mbedtls/include/mbedtls/ecdh.h vendored
View File

@@ -13,8 +13,31 @@
* Cryptography</em>.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -30,14 +53,32 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ECDH_H
#define MBEDTLS_ECDH_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ecp.h"
/*
* Use a backward compatible ECDH context.
*
* This flag is always enabled for now and future versions might add a
* configuration option that conditionally undefines this flag.
* The configuration option in question may have a different name.
*
* Features undefining this flag, must have a warning in their description in
* config.h stating that the feature breaks backward compatibility.
*/
#define MBEDTLS_ECDH_LEGACY_CONTEXT
#ifdef __cplusplus
extern "C" {
#endif
@@ -51,11 +92,49 @@ typedef enum
MBEDTLS_ECDH_THEIRS, /**< The key of the peer. */
} mbedtls_ecdh_side;
#if !defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
/**
* Defines the ECDH implementation used.
*
* Later versions of the library may add new variants, therefore users should
* not make any assumptions about them.
*/
typedef enum
{
MBEDTLS_ECDH_VARIANT_NONE = 0, /*!< Implementation not defined. */
MBEDTLS_ECDH_VARIANT_MBEDTLS_2_0,/*!< The default Mbed TLS implementation */
} mbedtls_ecdh_variant;
/**
* The context used by the default ECDH implementation.
*
* Later versions might change the structure of this context, therefore users
* should not make any assumptions about the structure of
* mbedtls_ecdh_context_mbed.
*/
typedef struct mbedtls_ecdh_context_mbed
{
mbedtls_ecp_group grp; /*!< The elliptic curve used. */
mbedtls_mpi d; /*!< The private key. */
mbedtls_ecp_point Q; /*!< The public key. */
mbedtls_ecp_point Qp; /*!< The value of the public key of the peer. */
mbedtls_mpi z; /*!< The shared secret. */
#if defined(MBEDTLS_ECP_RESTARTABLE)
mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */
#endif
} mbedtls_ecdh_context_mbed;
#endif
/**
*
* \warning Performing multiple operations concurrently on the same
* ECDSA context is not supported; objects of this type
* should not be shared between multiple threads.
* \brief The ECDH context structure.
*/
typedef struct
typedef struct mbedtls_ecdh_context
{
#if defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
mbedtls_ecp_group grp; /*!< The elliptic curve used. */
mbedtls_mpi d; /*!< The private key. */
mbedtls_ecp_point Q; /*!< The public key. */
@@ -65,6 +144,29 @@ typedef struct
mbedtls_ecp_point Vi; /*!< The blinding value. */
mbedtls_ecp_point Vf; /*!< The unblinding value. */
mbedtls_mpi _d; /*!< The previous \p d. */
#if defined(MBEDTLS_ECP_RESTARTABLE)
int restart_enabled; /*!< The flag for restartable mode. */
mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */
#endif /* MBEDTLS_ECP_RESTARTABLE */
#else
uint8_t point_format; /*!< The format of point export in TLS messages
as defined in RFC 4492. */
mbedtls_ecp_group_id grp_id;/*!< The elliptic curve used. */
mbedtls_ecdh_variant var; /*!< The ECDH implementation/structure used. */
union
{
mbedtls_ecdh_context_mbed mbed_ecdh;
} ctx; /*!< Implementation-specific context. The
context in use is specified by the \c var
field. */
#if defined(MBEDTLS_ECP_RESTARTABLE)
uint8_t restart_enabled; /*!< The flag for restartable mode. Functions of
an alternative implementation not supporting
restartable mode must return
MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED error
if this flag is set. */
#endif /* MBEDTLS_ECP_RESTARTABLE */
#endif /* MBEDTLS_ECDH_LEGACY_CONTEXT */
}
mbedtls_ecdh_context;
@@ -78,16 +180,20 @@ mbedtls_ecdh_context;
*
* \see ecp.h
*
* \param grp The ECP group.
* \param grp The ECP group to use. This must be initialized and have
* domain parameters loaded, for example through
* mbedtls_ecp_load() or mbedtls_ecp_tls_read_group().
* \param d The destination MPI (private key).
* This must be initialized.
* \param Q The destination point (public key).
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* This must be initialized.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL in case \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or
* \return Another \c MBEDTLS_ERR_ECP_XXX or
* \c MBEDTLS_MPI_XXX error code on failure.
*
*/
int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
@@ -106,15 +212,25 @@ int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp
* countermeasures against side-channel attacks.
* For more information, see mbedtls_ecp_mul().
*
* \param grp The ECP group.
* \param grp The ECP group to use. This must be initialized and have
* domain parameters loaded, for example through
* mbedtls_ecp_load() or mbedtls_ecp_tls_read_group().
* \param z The destination MPI (shared secret).
* This must be initialized.
* \param Q The public key from another party.
* This must be initialized.
* \param d Our secret exponent (private key).
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* This must be initialized.
* \param f_rng The RNG function. This may be \c NULL if randomization
* of intermediate results during the ECP computations is
* not needed (discouraged). See the documentation of
* mbedtls_ecp_mul() for more.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a
* context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or
* \return Another \c MBEDTLS_ERR_ECP_XXX or
* \c MBEDTLS_MPI_XXX error code on failure.
*/
int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z,
@@ -125,39 +241,62 @@ int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z,
/**
* \brief This function initializes an ECDH context.
*
* \param ctx The ECDH context to initialize.
* \param ctx The ECDH context to initialize. This must not be \c NULL.
*/
void mbedtls_ecdh_init( mbedtls_ecdh_context *ctx );
/**
* \brief This function frees a context.
* \brief This function sets up the ECDH context with the information
* given.
*
* \param ctx The context to free.
*/
void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx );
/**
* \brief This function generates a public key and a TLS
* ServerKeyExchange payload.
* This function should be called after mbedtls_ecdh_init() but
* before mbedtls_ecdh_make_params(). There is no need to call
* this function before mbedtls_ecdh_read_params().
*
* This is the first function used by a TLS server for ECDHE
* ciphersuites.
*
* \note This function assumes that the ECP group (grp) of the
* \p ctx context has already been properly set,
* for example, using mbedtls_ecp_group_load().
* \param ctx The ECDH context to set up. This must be initialized.
* \param grp_id The group id of the group to set up the context for.
*
* \return \c 0 on success.
*/
int mbedtls_ecdh_setup( mbedtls_ecdh_context *ctx,
mbedtls_ecp_group_id grp_id );
/**
* \brief This function frees a context.
*
* \param ctx The context to free. This may be \c NULL, in which
* case this function does nothing. If it is not \c NULL,
* it must point to an initialized ECDH context.
*/
void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx );
/**
* \brief This function generates an EC key pair and exports its
* in the format used in a TLS ServerKeyExchange handshake
* message.
*
* This is the second function used by a TLS server for ECDHE
* ciphersuites. (It is called after mbedtls_ecdh_setup().)
*
* \see ecp.h
*
* \param ctx The ECDH context.
* \param olen The number of characters written.
* \param buf The destination buffer.
* \param blen The length of the destination buffer.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param ctx The ECDH context to use. This must be initialized
* and bound to a group, for example via mbedtls_ecdh_setup().
* \param olen The address at which to store the number of Bytes written.
* \param buf The destination buffer. This must be a writable buffer of
* length \p blen Bytes.
* \param blen The length of the destination buffer \p buf in Bytes.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL in case \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
*/
int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen,
unsigned char *buf, size_t blen,
@@ -165,24 +304,32 @@ int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen,
void *p_rng );
/**
* \brief This function parses and processes a TLS ServerKeyExhange
* payload.
* \brief This function parses the ECDHE parameters in a
* TLS ServerKeyExchange handshake message.
*
* This is the first function used by a TLS client for ECDHE
* ciphersuites.
* \note In a TLS handshake, this is the how the client
* sets up its ECDHE context from the server's public
* ECDHE key material.
*
* \see ecp.h
*
* \param ctx The ECDH context.
* \param buf The pointer to the start of the input buffer.
* \param end The address for one Byte past the end of the buffer.
* \param ctx The ECDHE context to use. This must be initialized.
* \param buf On input, \c *buf must be the start of the input buffer.
* On output, \c *buf is updated to point to the end of the
* data that has been read. On success, this is the first byte
* past the end of the ServerKeyExchange parameters.
* On error, this is the point at which an error has been
* detected, which is usually not useful except to debug
* failures.
* \param end The end of the input buffer.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
*
*/
int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx,
const unsigned char **buf, const unsigned char *end );
const unsigned char **buf,
const unsigned char *end );
/**
* \brief This function sets up an ECDH context from an EC key.
@@ -193,36 +340,45 @@ int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx,
*
* \see ecp.h
*
* \param ctx The ECDH context to set up.
* \param key The EC key to use.
* \param side Defines the source of the key: 1: Our key, or
* 0: The key of the peer.
* \param ctx The ECDH context to set up. This must be initialized.
* \param key The EC key to use. This must be initialized.
* \param side Defines the source of the key. Possible values are:
* - #MBEDTLS_ECDH_OURS: The key is ours.
* - #MBEDTLS_ECDH_THEIRS: The key is that of the peer.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
* \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
*
*/
int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx, const mbedtls_ecp_keypair *key,
mbedtls_ecdh_side side );
int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx,
const mbedtls_ecp_keypair *key,
mbedtls_ecdh_side side );
/**
* \brief This function generates a public key and a TLS
* ClientKeyExchange payload.
* \brief This function generates a public key and exports it
* as a TLS ClientKeyExchange payload.
*
* This is the second function used by a TLS client for ECDH(E)
* ciphersuites.
*
* \see ecp.h
*
* \param ctx The ECDH context.
* \param olen The number of Bytes written.
* \param buf The destination buffer.
* \param blen The size of the destination buffer.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param ctx The ECDH context to use. This must be initialized
* and bound to a group, the latter usually by
* mbedtls_ecdh_read_params().
* \param olen The address at which to store the number of Bytes written.
* This must not be \c NULL.
* \param buf The destination buffer. This must be a writable buffer
* of length \p blen Bytes.
* \param blen The size of the destination buffer \p buf in Bytes.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL in case \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
*/
int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen,
unsigned char *buf, size_t blen,
@@ -230,23 +386,26 @@ int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen,
void *p_rng );
/**
* \brief This function parses and processes a TLS ClientKeyExchange
* payload.
* \brief This function parses and processes the ECDHE payload of a
* TLS ClientKeyExchange message.
*
* This is the second function used by a TLS server for ECDH(E)
* ciphersuites.
* This is the third function used by a TLS server for ECDH(E)
* ciphersuites. (It is called after mbedtls_ecdh_setup() and
* mbedtls_ecdh_make_params().)
*
* \see ecp.h
*
* \param ctx The ECDH context.
* \param buf The start of the input buffer.
* \param blen The length of the input buffer.
* \param ctx The ECDH context to use. This must be initialized
* and bound to a group, for example via mbedtls_ecdh_setup().
* \param buf The pointer to the ClientKeyExchange payload. This must
* be a readable buffer of length \p blen Bytes.
* \param blen The length of the input buffer \p buf in Bytes.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
*/
int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx,
const unsigned char *buf, size_t blen );
const unsigned char *buf, size_t blen );
/**
* \brief This function derives and exports the shared secret.
@@ -259,22 +418,46 @@ int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx,
* For more information, see mbedtls_ecp_mul().
*
* \see ecp.h
*
* \param ctx The ECDH context.
* \param olen The number of Bytes written.
* \param buf The destination buffer.
* \param blen The length of the destination buffer.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param ctx The ECDH context to use. This must be initialized
* and have its own private key generated and the peer's
* public key imported.
* \param olen The address at which to store the total number of
* Bytes written on success. This must not be \c NULL.
* \param buf The buffer to write the generated shared key to. This
* must be a writable buffer of size \p blen Bytes.
* \param blen The length of the destination buffer \p buf in Bytes.
* \param f_rng The RNG function, for blinding purposes. This may
* b \c NULL if blinding isn't needed.
* \param p_rng The RNG context. This may be \c NULL if \p f_rng
* doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
*/
int mbedtls_ecdh_calc_secret( mbedtls_ecdh_context *ctx, size_t *olen,
unsigned char *buf, size_t blen,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief This function enables restartable EC computations for this
* context. (Default: disabled.)
*
* \see \c mbedtls_ecp_set_max_ops()
*
* \note It is not possible to safely disable restartable
* computations once enabled, except by free-ing the context,
* which cancels possible in-progress operations.
*
* \param ctx The ECDH context to use. This must be initialized.
*/
void mbedtls_ecdh_enable_restart( mbedtls_ecdh_context *ctx );
#endif /* MBEDTLS_ECP_RESTARTABLE */
#ifdef __cplusplus
}
#endif

426
externals/mbedtls/include/mbedtls/ecdsa.h vendored
View File

@@ -11,8 +11,31 @@
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,12 +51,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ECDSA_H
#define MBEDTLS_ECDSA_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ecp.h"
#include "md.h"
@@ -57,20 +86,71 @@
/** The maximal size of an ECDSA signature in Bytes. */
#define MBEDTLS_ECDSA_MAX_LEN ( 3 + 2 * ( 3 + MBEDTLS_ECP_MAX_BYTES ) )
/**
* \brief The ECDSA context structure.
*/
typedef mbedtls_ecp_keypair mbedtls_ecdsa_context;
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief The ECDSA context structure.
*
* \warning Performing multiple operations concurrently on the same
* ECDSA context is not supported; objects of this type
* should not be shared between multiple threads.
*/
typedef mbedtls_ecp_keypair mbedtls_ecdsa_context;
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Internal restart context for ecdsa_verify()
*
* \note Opaque struct, defined in ecdsa.c
*/
typedef struct mbedtls_ecdsa_restart_ver mbedtls_ecdsa_restart_ver_ctx;
/**
* \brief Internal restart context for ecdsa_sign()
*
* \note Opaque struct, defined in ecdsa.c
*/
typedef struct mbedtls_ecdsa_restart_sig mbedtls_ecdsa_restart_sig_ctx;
#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
/**
* \brief Internal restart context for ecdsa_sign_det()
*
* \note Opaque struct, defined in ecdsa.c
*/
typedef struct mbedtls_ecdsa_restart_det mbedtls_ecdsa_restart_det_ctx;
#endif
/**
* \brief General context for resuming ECDSA operations
*/
typedef struct
{
mbedtls_ecp_restart_ctx ecp; /*!< base context for ECP restart and
shared administrative info */
mbedtls_ecdsa_restart_ver_ctx *ver; /*!< ecdsa_verify() sub-context */
mbedtls_ecdsa_restart_sig_ctx *sig; /*!< ecdsa_sign() sub-context */
#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
mbedtls_ecdsa_restart_det_ctx *det; /*!< ecdsa_sign_det() sub-context */
#endif
} mbedtls_ecdsa_restart_ctx;
#else /* MBEDTLS_ECP_RESTARTABLE */
/* Now we can declare functions that take a pointer to that */
typedef void mbedtls_ecdsa_restart_ctx;
#endif /* MBEDTLS_ECP_RESTARTABLE */
/**
* \brief This function computes the ECDSA signature of a
* previously-hashed message.
*
* \note The deterministic version is usually preferred.
* \note The deterministic version implemented in
* mbedtls_ecdsa_sign_det() is usually preferred.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated
@@ -80,14 +160,22 @@ extern "C" {
*
* \see ecp.h
*
* \param grp The ECP group.
* \param r The first output integer.
* \param s The second output integer.
* \param d The private signing key.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param grp The context for the elliptic curve to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param r The MPI context in which to store the first part
* the signature. This must be initialized.
* \param s The MPI context in which to store the second part
* the signature. This must be initialized.
* \param d The private signing key. This must be initialized.
* \param buf The content to be signed. This is usually the hash of
* the original data to be signed. This must be a readable
* buffer of length \p blen Bytes. It may be \c NULL if
* \p blen is zero.
* \param blen The length of \p buf in Bytes.
* \param f_rng The RNG function. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng doesn't need a context parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX
@@ -112,23 +200,90 @@ int mbedtls_ecdsa_sign( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \warning Since the output of the internal RNG is always the same for
* the same key and message, this limits the efficiency of
* blinding and leaks information through side channels. For
* secure behavior use mbedtls_ecdsa_sign_det_ext() instead.
*
* (Optimally the blinding is a random value that is different
* on every execution. In this case the blinding is still
* random from the attackers perspective, but is the same on
* each execution. This means that this blinding does not
* prevent attackers from recovering secrets by combining
* several measurement traces, but may prevent some attacks
* that exploit relationships between secret data.)
*
* \see ecp.h
*
* \param grp The ECP group.
* \param r The first output integer.
* \param s The second output integer.
* \param d The private signing key.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param md_alg The MD algorithm used to hash the message.
* \param grp The context for the elliptic curve to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param r The MPI context in which to store the first part
* the signature. This must be initialized.
* \param s The MPI context in which to store the second part
* the signature. This must be initialized.
* \param d The private signing key. This must be initialized
* and setup, for example through mbedtls_ecp_gen_privkey().
* \param buf The hashed content to be signed. This must be a readable
* buffer of length \p blen Bytes. It may be \c NULL if
* \p blen is zero.
* \param blen The length of \p buf in Bytes.
* \param md_alg The hash algorithm used to hash the original data.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
* error code on failure.
*/
int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s,
const mbedtls_mpi *d, const unsigned char *buf, size_t blen,
mbedtls_md_type_t md_alg );
int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r,
mbedtls_mpi *s, const mbedtls_mpi *d,
const unsigned char *buf, size_t blen,
mbedtls_md_type_t md_alg );
/**
* \brief This function computes the ECDSA signature of a
* previously-hashed message, deterministic version.
*
* For more information, see <em>RFC-6979: Deterministic
* Usage of the Digital Signature Algorithm (DSA) and Elliptic
* Curve Digital Signature Algorithm (ECDSA)</em>.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
* (SECG): SEC1 Elliptic Curve Cryptography</em>, section
* 4.1.3, step 5.
*
* \see ecp.h
*
* \param grp The context for the elliptic curve to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param r The MPI context in which to store the first part
* the signature. This must be initialized.
* \param s The MPI context in which to store the second part
* the signature. This must be initialized.
* \param d The private signing key. This must be initialized
* and setup, for example through mbedtls_ecp_gen_privkey().
* \param buf The hashed content to be signed. This must be a readable
* buffer of length \p blen Bytes. It may be \c NULL if
* \p blen is zero.
* \param blen The length of \p buf in Bytes.
* \param md_alg The hash algorithm used to hash the original data.
* \param f_rng_blind The RNG function used for blinding. This must not be
* \c NULL.
* \param p_rng_blind The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng doesn't need a context parameter.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX
* error code on failure.
*/
int mbedtls_ecdsa_sign_det_ext( mbedtls_ecp_group *grp, mbedtls_mpi *r,
mbedtls_mpi *s, const mbedtls_mpi *d,
const unsigned char *buf, size_t blen,
mbedtls_md_type_t md_alg,
int (*f_rng_blind)(void *, unsigned char *,
size_t),
void *p_rng_blind );
#endif /* MBEDTLS_ECDSA_DETERMINISTIC */
/**
@@ -143,12 +298,19 @@ int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi
*
* \see ecp.h
*
* \param grp The ECP group.
* \param buf The message hash.
* \param blen The length of \p buf.
* \param Q The public key to use for verification.
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param buf The hashed content that was signed. This must be a readable
* buffer of length \p blen Bytes. It may be \c NULL if
* \p blen is zero.
* \param blen The length of \p buf in Bytes.
* \param Q The public key to use for verification. This must be
* initialized and setup.
* \param r The first integer of the signature.
* This must be initialized.
* \param s The second integer of the signature.
* This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the signature
@@ -157,8 +319,9 @@ int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi
* error code on failure for any other reason.
*/
int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
const unsigned char *buf, size_t blen,
const mbedtls_ecp_point *Q, const mbedtls_mpi *r, const mbedtls_mpi *s);
const unsigned char *buf, size_t blen,
const mbedtls_ecp_point *Q, const mbedtls_mpi *r,
const mbedtls_mpi *s);
/**
* \brief This function computes the ECDSA signature and writes it
@@ -175,11 +338,6 @@ int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
* of the Digital Signature Algorithm (DSA) and Elliptic
* Curve Digital Signature Algorithm (ECDSA)</em>.
*
* \note The \p sig buffer must be at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if
* a 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
@@ -188,25 +346,84 @@ int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp,
*
* \see ecp.h
*
* \param ctx The ECDSA context.
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and private key bound to it, for example
* via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
* \param hash The message hash.
* \param hlen The length of the hash.
* \param sig The buffer that holds the signature.
* \param slen The length of the signature written.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param hash The message hash to be signed. This must be a readable
* buffer of length \p blen Bytes.
* \param hlen The length of the hash \p hash in Bytes.
* \param sig The buffer to which to write the signature. This must be a
* writable buffer of length at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if
* a 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
* \param slen The address at which to store the actual length of
* the signature written. Must not be \c NULL.
* \param f_rng The RNG function. This must not be \c NULL if
* #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise,
* it is unused and may be set to \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't use a context.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
* \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t md_alg,
int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx,
mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hlen,
unsigned char *sig, size_t *slen,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief This function computes the ECDSA signature and writes it
* to a buffer, in a restartable way.
*
* \see \c mbedtls_ecdsa_write_signature()
*
* \note This function is like \c mbedtls_ecdsa_write_signature()
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and private key bound to it, for example
* via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param md_alg The message digest that was used to hash the message.
* \param hash The message hash to be signed. This must be a readable
* buffer of length \p blen Bytes.
* \param hlen The length of the hash \p hash in Bytes.
* \param sig The buffer to which to write the signature. This must be a
* writable buffer of length at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if
* a 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
* \param slen The address at which to store the actual length of
* the signature written. Must not be \c NULL.
* \param f_rng The RNG function. This must not be \c NULL if
* #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise,
* it is unused and may be set to \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't use a context.
* \param rs_ctx The restart context to use. This may be \c NULL to disable
* restarting. If it is not \c NULL, it must point to an
* initialized restart context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
* \c MBEDTLS_ERR_ASN1_XXX error code on failure.
*/
int mbedtls_ecdsa_write_signature_restartable( mbedtls_ecdsa_context *ctx,
mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hlen,
unsigned char *sig, size_t *slen,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
mbedtls_ecdsa_restart_ctx *rs_ctx );
#if defined(MBEDTLS_ECDSA_DETERMINISTIC)
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
@@ -227,11 +444,6 @@ int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t
* \warning It is not thread-safe to use the same context in
* multiple threads.
*
* \note The \p sig buffer must be at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if a
* 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
*
* \note If the bitlength of the message hash is larger than the
* bitlength of the group order, then the hash is truncated as
* defined in <em>Standards for Efficient Cryptography Group
@@ -243,12 +455,20 @@ int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, mbedtls_md_type_t
* \deprecated Superseded by mbedtls_ecdsa_write_signature() in
* Mbed TLS version 2.0 and later.
*
* \param ctx The ECDSA context.
* \param hash The message hash.
* \param hlen The length of the hash.
* \param sig The buffer that holds the signature.
* \param slen The length of the signature written.
* \param md_alg The MD algorithm used to hash the message.
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and private key bound to it, for example
* via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair().
* \param hash The message hash to be signed. This must be a readable
* buffer of length \p blen Bytes.
* \param hlen The length of the hash \p hash in Bytes.
* \param sig The buffer to which to write the signature. This must be a
* writable buffer of length at least twice as large as the
* size of the curve used, plus 9. For example, 73 Bytes if
* a 256-bit curve is used. A buffer length of
* #MBEDTLS_ECDSA_MAX_LEN is always safe.
* \param slen The address at which to store the actual length of
* the signature written. Must not be \c NULL.
* \param md_alg The message digest that was used to hash the message.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or
@@ -273,11 +493,14 @@ int mbedtls_ecdsa_write_signature_det( mbedtls_ecdsa_context *ctx,
*
* \see ecp.h
*
* \param ctx The ECDSA context.
* \param hash The message hash.
* \param hlen The size of the hash.
* \param sig The signature to read and verify.
* \param slen The size of \p sig.
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and public key bound to it.
* \param hash The message hash that was signed. This must be a readable
* buffer of length \p size Bytes.
* \param hlen The size of the hash \p hash.
* \param sig The signature to read and verify. This must be a readable
* buffer of length \p slen Bytes.
* \param slen The size of \p sig in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
@@ -290,16 +513,54 @@ int mbedtls_ecdsa_read_signature( mbedtls_ecdsa_context *ctx,
const unsigned char *hash, size_t hlen,
const unsigned char *sig, size_t slen );
/**
* \brief This function reads and verifies an ECDSA signature,
* in a restartable way.
*
* \see \c mbedtls_ecdsa_read_signature()
*
* \note This function is like \c mbedtls_ecdsa_read_signature()
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
* \param ctx The ECDSA context to use. This must be initialized
* and have a group and public key bound to it.
* \param hash The message hash that was signed. This must be a readable
* buffer of length \p size Bytes.
* \param hlen The size of the hash \p hash.
* \param sig The signature to read and verify. This must be a readable
* buffer of length \p slen Bytes.
* \param slen The size of \p sig in Bytes.
* \param rs_ctx The restart context to use. This may be \c NULL to disable
* restarting. If it is not \c NULL, it must point to an
* initialized restart context.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid.
* \return #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid
* signature in \p sig, but its length is less than \p siglen.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX
* error code on failure for any other reason.
*/
int mbedtls_ecdsa_read_signature_restartable( mbedtls_ecdsa_context *ctx,
const unsigned char *hash, size_t hlen,
const unsigned char *sig, size_t slen,
mbedtls_ecdsa_restart_ctx *rs_ctx );
/**
* \brief This function generates an ECDSA keypair on the given curve.
*
* \see ecp.h
*
* \param ctx The ECDSA context to store the keypair in.
* This must be initialized.
* \param gid The elliptic curve to use. One of the various
* \c MBEDTLS_ECP_DP_XXX macros depending on configuration.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
@@ -308,32 +569,59 @@ int mbedtls_ecdsa_genkey( mbedtls_ecdsa_context *ctx, mbedtls_ecp_group_id gid,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief This function sets an ECDSA context from an EC key pair.
* \brief This function sets up an ECDSA context from an EC key pair.
*
* \see ecp.h
*
* \param ctx The ECDSA context to set.
* \param key The EC key to use.
* \param ctx The ECDSA context to setup. This must be initialized.
* \param key The EC key to use. This must be initialized and hold
* a private-public key pair or a public key. In the former
* case, the ECDSA context may be used for signature creation
* and verification after this call. In the latter case, it
* may be used for signature verification.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX code on failure.
*/
int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx, const mbedtls_ecp_keypair *key );
int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx,
const mbedtls_ecp_keypair *key );
/**
* \brief This function initializes an ECDSA context.
*
* \param ctx The ECDSA context to initialize.
* This must not be \c NULL.
*/
void mbedtls_ecdsa_init( mbedtls_ecdsa_context *ctx );
/**
* \brief This function frees an ECDSA context.
*
* \param ctx The ECDSA context to free.
* \param ctx The ECDSA context to free. This may be \c NULL,
* in which case this function does nothing. If it
* is not \c NULL, it must be initialized.
*/
void mbedtls_ecdsa_free( mbedtls_ecdsa_context *ctx );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Initialize a restart context.
*
* \param ctx The restart context to initialize.
* This must not be \c NULL.
*/
void mbedtls_ecdsa_restart_init( mbedtls_ecdsa_restart_ctx *ctx );
/**
* \brief Free the components of a restart context.
*
* \param ctx The restart context to free. This may be \c NULL,
* in which case this function does nothing. If it
* is not \c NULL, it must be initialized.
*/
void mbedtls_ecdsa_restart_free( mbedtls_ecdsa_restart_ctx *ctx );
#endif /* MBEDTLS_ECP_RESTARTABLE */
#ifdef __cplusplus
}
#endif

179
externals/mbedtls/include/mbedtls/ecjpake.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Elliptic curve J-PAKE
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ECJPAKE_H
#define MBEDTLS_ECJPAKE_H
@@ -42,6 +65,11 @@
* The payloads are serialized in a way suitable for use in TLS, but could
* also be use outside TLS.
*/
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ecp.h"
#include "md.h"
@@ -70,7 +98,7 @@ typedef enum {
* convetion from the Thread v1.0 spec. Correspondance is indicated in the
* description as a pair C: client name, S: server name
*/
typedef struct
typedef struct mbedtls_ecjpake_context
{
const mbedtls_md_info_t *md_info; /**< Hash to use */
mbedtls_ecp_group grp; /**< Elliptic curve */
@@ -94,28 +122,33 @@ typedef struct
#endif /* MBEDTLS_ECJPAKE_ALT */
/**
* \brief Initialize a context
* (just makes it ready for setup() or free()).
* \brief Initialize an ECJPAKE context.
*
* \param ctx context to initialize
* \param ctx The ECJPAKE context to initialize.
* This must not be \c NULL.
*/
void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx );
/**
* \brief Set up a context for use
* \brief Set up an ECJPAKE context for use.
*
* \note Currently the only values for hash/curve allowed by the
* standard are MBEDTLS_MD_SHA256/MBEDTLS_ECP_DP_SECP256R1.
* standard are #MBEDTLS_MD_SHA256/#MBEDTLS_ECP_DP_SECP256R1.
*
* \param ctx context to set up
* \param role Our role: client or server
* \param hash hash function to use (MBEDTLS_MD_XXX)
* \param curve elliptic curve identifier (MBEDTLS_ECP_DP_XXX)
* \param secret pre-shared secret (passphrase)
* \param len length of the shared secret
* \param ctx The ECJPAKE context to set up. This must be initialized.
* \param role The role of the caller. This must be either
* #MBEDTLS_ECJPAKE_CLIENT or #MBEDTLS_ECJPAKE_SERVER.
* \param hash The identifier of the hash function to use,
* for example #MBEDTLS_MD_SHA256.
* \param curve The identifier of the elliptic curve to use,
* for example #MBEDTLS_ECP_DP_SECP256R1.
* \param secret The pre-shared secret (passphrase). This must be
* a readable buffer of length \p len Bytes. It need
* only be valid for the duration of this call.
* \param len The length of the pre-shared secret \p secret.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
mbedtls_ecjpake_role role,
@@ -125,29 +158,34 @@ int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
size_t len );
/**
* \brief Check if a context is ready for use
* \brief Check if an ECJPAKE context is ready for use.
*
* \param ctx Context to check
* \param ctx The ECJPAKE context to check. This must be
* initialized.
*
* \return 0 if the context is ready for use,
* MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
* \return \c 0 if the context is ready for use.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise.
*/
int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx );
/**
* \brief Generate and write the first round message
* (TLS: contents of the Client/ServerHello extension,
* excluding extension type and length bytes)
* excluding extension type and length bytes).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be
* initialized and set up.
* \param buf The buffer to write the contents to. This must be a
* writable buffer of length \p len Bytes.
* \param len The length of \p buf in Bytes.
* \param olen The address at which to store the total number
* of Bytes written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
@@ -157,14 +195,16 @@ int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
/**
* \brief Read and process the first round message
* (TLS: contents of the Client/ServerHello extension,
* excluding extension type and length bytes)
* excluding extension type and length bytes).
*
* \param ctx Context to use
* \param buf Pointer to extension contents
* \param len Extension length
* \param ctx The ECJPAKE context to use. This must be initialized
* and set up.
* \param buf The buffer holding the first round message. This must
* be a readable buffer of length \p len Bytes.
* \param len The length in Bytes of \p buf.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
const unsigned char *buf,
@@ -172,17 +212,21 @@ int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
/**
* \brief Generate and write the second round message
* (TLS: contents of the Client/ServerKeyExchange)
* (TLS: contents of the Client/ServerKeyExchange).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be initialized,
* set up, and already have performed round one.
* \param buf The buffer to write the round two contents to.
* This must be a writable buffer of length \p len Bytes.
* \param len The size of \p buf in Bytes.
* \param olen The address at which to store the total number of Bytes
* written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
@@ -191,14 +235,16 @@ int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
/**
* \brief Read and process the second round message
* (TLS: contents of the Client/ServerKeyExchange)
* (TLS: contents of the Client/ServerKeyExchange).
*
* \param ctx Context to use
* \param buf Pointer to the message
* \param len Message length
* \param ctx The ECJPAKE context to use. This must be initialized
* and set up and already have performed round one.
* \param buf The buffer holding the second round message. This must
* be a readable buffer of length \p len Bytes.
* \param len The length in Bytes of \p buf.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
const unsigned char *buf,
@@ -206,17 +252,21 @@ int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
/**
* \brief Derive the shared secret
* (TLS: Pre-Master Secret)
* (TLS: Pre-Master Secret).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be initialized,
* set up and have performed both round one and two.
* \param buf The buffer to write the derived secret to. This must
* be a writable buffer of length \p len Bytes.
* \param len The length of \p buf in Bytes.
* \param olen The address at which to store the total number of Bytes
* written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
@@ -224,14 +274,15 @@ int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
void *p_rng );
/**
* \brief Free a context's content
* \brief This clears an ECJPAKE context and frees any
* embedded data structure.
*
* \param ctx context to free
* \param ctx The ECJPAKE context to free. This may be \c NULL,
* in which case this function does nothing. If it is not
* \c NULL, it must point to an initialized ECJPAKE context.
*/
void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx );
#if defined(MBEDTLS_SELF_TEST)
/**

628
externals/mbedtls/include/mbedtls/ecp.h vendored
View File

@@ -15,8 +15,31 @@
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,12 +55,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ECP_H
#define MBEDTLS_ECP_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "bignum.h"
/*
@@ -51,8 +80,12 @@
#define MBEDTLS_ERR_ECP_RANDOM_FAILED -0x4D00 /**< Generation of random value, such as ephemeral key, failed. */
#define MBEDTLS_ERR_ECP_INVALID_KEY -0x4C80 /**< Invalid private or public key. */
#define MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH -0x4C00 /**< The buffer contains a valid signature followed by more data. */
/* MBEDTLS_ERR_ECP_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_ECP_HW_ACCEL_FAILED -0x4B80 /**< The ECP hardware accelerator failed. */
#define MBEDTLS_ERR_ECP_IN_PROGRESS -0x4B00 /**< Operation in progress, call again with the same parameters to continue. */
#ifdef __cplusplus
extern "C" {
#endif
@@ -94,7 +127,7 @@ typedef enum
/**
* Curve information, for use by other modules.
*/
typedef struct
typedef struct mbedtls_ecp_curve_info
{
mbedtls_ecp_group_id grp_id; /*!< An internal identifier. */
uint16_t tls_id; /*!< The TLS NamedCurve identifier. */
@@ -113,7 +146,7 @@ typedef struct
* Otherwise, \p X and \p Y are its standard (affine)
* coordinates.
*/
typedef struct
typedef struct mbedtls_ecp_point
{
mbedtls_mpi X; /*!< The X coordinate of the ECP point. */
mbedtls_mpi Y; /*!< The Y coordinate of the ECP point. */
@@ -157,8 +190,12 @@ mbedtls_ecp_point;
* additions or subtractions. Therefore, it is only an approximative modular
* reduction. It must return 0 on success and non-zero on failure.
*
* \note Alternative implementations must keep the group IDs distinct. If
* two group structures have the same ID, then they must be
* identical.
*
*/
typedef struct
typedef struct mbedtls_ecp_group
{
mbedtls_ecp_group_id id; /*!< An internal group identifier. */
mbedtls_mpi P; /*!< The prime modulus of the base field. */
@@ -245,6 +282,70 @@ mbedtls_ecp_group;
#include "ecp_alt.h"
#endif /* MBEDTLS_ECP_ALT */
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Internal restart context for multiplication
*
* \note Opaque struct
*/
typedef struct mbedtls_ecp_restart_mul mbedtls_ecp_restart_mul_ctx;
/**
* \brief Internal restart context for ecp_muladd()
*
* \note Opaque struct
*/
typedef struct mbedtls_ecp_restart_muladd mbedtls_ecp_restart_muladd_ctx;
/**
* \brief General context for resuming ECC operations
*/
typedef struct
{
unsigned ops_done; /*!< current ops count */
unsigned depth; /*!< call depth (0 = top-level) */
mbedtls_ecp_restart_mul_ctx *rsm; /*!< ecp_mul_comb() sub-context */
mbedtls_ecp_restart_muladd_ctx *ma; /*!< ecp_muladd() sub-context */
} mbedtls_ecp_restart_ctx;
/*
* Operation counts for restartable functions
*/
#define MBEDTLS_ECP_OPS_CHK 3 /*!< basic ops count for ecp_check_pubkey() */
#define MBEDTLS_ECP_OPS_DBL 8 /*!< basic ops count for ecp_double_jac() */
#define MBEDTLS_ECP_OPS_ADD 11 /*!< basic ops count for see ecp_add_mixed() */
#define MBEDTLS_ECP_OPS_INV 120 /*!< empirical equivalent for mpi_mod_inv() */
/**
* \brief Internal; for restartable functions in other modules.
* Check and update basic ops budget.
*
* \param grp Group structure
* \param rs_ctx Restart context
* \param ops Number of basic ops to do
*
* \return \c 0 if doing \p ops basic ops is still allowed,
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS otherwise.
*/
int mbedtls_ecp_check_budget( const mbedtls_ecp_group *grp,
mbedtls_ecp_restart_ctx *rs_ctx,
unsigned ops );
/* Utility macro for checking and updating ops budget */
#define MBEDTLS_ECP_BUDGET( ops ) \
MBEDTLS_MPI_CHK( mbedtls_ecp_check_budget( grp, rs_ctx, \
(unsigned) (ops) ) );
#else /* MBEDTLS_ECP_RESTARTABLE */
#define MBEDTLS_ECP_BUDGET( ops ) /* no-op; for compatibility */
/* We want to declare restartable versions of existing functions anyway */
typedef void mbedtls_ecp_restart_ctx;
#endif /* MBEDTLS_ECP_RESTARTABLE */
/**
* \brief The ECP key-pair structure.
*
@@ -253,7 +354,7 @@ mbedtls_ecp_group;
* \note Members are deliberately in the same order as in the
* ::mbedtls_ecdsa_context structure.
*/
typedef struct
typedef struct mbedtls_ecp_keypair
{
mbedtls_ecp_group grp; /*!< Elliptic curve and base point */
mbedtls_mpi d; /*!< our secret value */
@@ -272,6 +373,75 @@ mbedtls_ecp_keypair;
*/
#define MBEDTLS_ECP_TLS_NAMED_CURVE 3 /**< The named_curve of ECCurveType. */
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Set the maximum number of basic operations done in a row.
*
* If more operations are needed to complete a computation,
* #MBEDTLS_ERR_ECP_IN_PROGRESS will be returned by the
* function performing the computation. It is then the
* caller's responsibility to either call again with the same
* parameters until it returns 0 or an error code; or to free
* the restart context if the operation is to be aborted.
*
* It is strictly required that all input parameters and the
* restart context be the same on successive calls for the
* same operation, but output parameters need not be the
* same; they must not be used until the function finally
* returns 0.
*
* This only applies to functions whose documentation
* mentions they may return #MBEDTLS_ERR_ECP_IN_PROGRESS (or
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS for functions in the
* SSL module). For functions that accept a "restart context"
* argument, passing NULL disables restart and makes the
* function equivalent to the function with the same name
* with \c _restartable removed. For functions in the ECDH
* module, restart is disabled unless the function accepts
* an "ECDH context" argument and
* mbedtls_ecdh_enable_restart() was previously called on
* that context. For function in the SSL module, restart is
* only enabled for specific sides and key exchanges
* (currently only for clients and ECDHE-ECDSA).
*
* \param max_ops Maximum number of basic operations done in a row.
* Default: 0 (unlimited).
* Lower (non-zero) values mean ECC functions will block for
* a lesser maximum amount of time.
*
* \note A "basic operation" is defined as a rough equivalent of a
* multiplication in GF(p) for the NIST P-256 curve.
* As an indication, with default settings, a scalar
* multiplication (full run of \c mbedtls_ecp_mul()) is:
* - about 3300 basic operations for P-256
* - about 9400 basic operations for P-384
*
* \note Very low values are not always respected: sometimes
* functions need to block for a minimum number of
* operations, and will do so even if max_ops is set to a
* lower value. That minimum depends on the curve size, and
* can be made lower by decreasing the value of
* \c MBEDTLS_ECP_WINDOW_SIZE. As an indication, here is the
* lowest effective value for various curves and values of
* that parameter (w for short):
* w=6 w=5 w=4 w=3 w=2
* P-256 208 208 160 136 124
* P-384 682 416 320 272 248
* P-521 1364 832 640 544 496
*
* \note This setting is currently ignored by Curve25519.
*/
void mbedtls_ecp_set_max_ops( unsigned max_ops );
/**
* \brief Check if restart is enabled (max_ops != 0)
*
* \return \c 0 if \c max_ops == 0 (restart disabled)
* \return \c 1 otherwise (restart enabled)
*/
int mbedtls_ecp_restart_is_enabled( void );
#endif /* MBEDTLS_ECP_RESTARTABLE */
/**
* \brief This function retrieves the information defined in
* mbedtls_ecp_curve_info() for all supported curves in order
@@ -337,7 +507,7 @@ void mbedtls_ecp_point_init( mbedtls_ecp_point *pt );
*
* \note After this function is called, domain parameters
* for various ECP groups can be loaded through the
* mbedtls_ecp_load() or mbedtls_ecp_tls_read_group()
* mbedtls_ecp_group_load() or mbedtls_ecp_tls_read_group()
* functions.
*/
void mbedtls_ecp_group_init( mbedtls_ecp_group *grp );
@@ -358,25 +528,51 @@ void mbedtls_ecp_point_free( mbedtls_ecp_point *pt );
/**
* \brief This function frees the components of an ECP group.
* \param grp The group to free.
*
* \param grp The group to free. This may be \c NULL, in which
* case this function returns immediately. If it is not
* \c NULL, it must point to an initialized ECP group.
*/
void mbedtls_ecp_group_free( mbedtls_ecp_group *grp );
/**
* \brief This function frees the components of a key pair.
* \param key The key pair to free.
*
* \param key The key pair to free. This may be \c NULL, in which
* case this function returns immediately. If it is not
* \c NULL, it must point to an initialized ECP key pair.
*/
void mbedtls_ecp_keypair_free( mbedtls_ecp_keypair *key );
#if defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Initialize a restart context.
*
* \param ctx The restart context to initialize. This must
* not be \c NULL.
*/
void mbedtls_ecp_restart_init( mbedtls_ecp_restart_ctx *ctx );
/**
* \brief Free the components of a restart context.
*
* \param ctx The restart context to free. This may be \c NULL, in which
* case this function returns immediately. If it is not
* \c NULL, it must point to an initialized restart context.
*/
void mbedtls_ecp_restart_free( mbedtls_ecp_restart_ctx *ctx );
#endif /* MBEDTLS_ECP_RESTARTABLE */
/**
* \brief This function copies the contents of point \p Q into
* point \p P.
*
* \param P The destination point.
* \param Q The source point.
* \param P The destination point. This must be initialized.
* \param Q The source point. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return Another negative error code for other kinds of failure.
*/
int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q );
@@ -384,31 +580,35 @@ int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q );
* \brief This function copies the contents of group \p src into
* group \p dst.
*
* \param dst The destination group.
* \param src The source group.
* \param dst The destination group. This must be initialized.
* \param src The source group. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst, const mbedtls_ecp_group *src );
int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst,
const mbedtls_ecp_group *src );
/**
* \brief This function sets a point to zero.
* \brief This function sets a point to the point at infinity.
*
* \param pt The point to set.
* \param pt The point to set. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_set_zero( mbedtls_ecp_point *pt );
/**
* \brief This function checks if a point is zero.
* \brief This function checks if a point is the point at infinity.
*
* \param pt The point to test.
* \param pt The point to test. This must be initialized.
*
* \return \c 1 if the point is zero.
* \return \c 0 if the point is non-zero.
* \return A negative error code on failure.
*/
int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt );
@@ -418,8 +618,8 @@ int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt );
* \note This assumes that the points are normalized. Otherwise,
* they may compare as "not equal" even if they are.
*
* \param P The first point to compare.
* \param Q The second point to compare.
* \param P The first point to compare. This must be initialized.
* \param Q The second point to compare. This must be initialized.
*
* \return \c 0 if the points are equal.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the points are not equal.
@@ -431,7 +631,7 @@ int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P,
* \brief This function imports a non-zero point from two ASCII
* strings.
*
* \param P The destination point.
* \param P The destination point. This must be initialized.
* \param radix The numeric base of the input.
* \param x The first affine coordinate, as a null-terminated string.
* \param y The second affine coordinate, as a null-terminated string.
@@ -446,15 +646,21 @@ int mbedtls_ecp_point_read_string( mbedtls_ecp_point *P, int radix,
* \brief This function exports a point into unsigned binary data.
*
* \param grp The group to which the point should belong.
* \param P The point to export.
* \param format The point format. Should be an \c MBEDTLS_ECP_PF_XXX macro.
* \param olen The length of the output.
* \param buf The output buffer.
* \param buflen The length of the output buffer.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param P The point to export. This must be initialized.
* \param format The point format. This must be either
* #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED.
* \param olen The address at which to store the length of
* the output in Bytes. This must not be \c NULL.
* \param buf The output buffer. This must be a writable buffer
* of length \p buflen Bytes.
* \param buflen The length of the output buffer \p buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA
* or #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
* \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer
* is too small to hold the point.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P,
int format, size_t *olen,
@@ -468,108 +674,158 @@ int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_
* for that.
*
* \param grp The group to which the point should belong.
* \param P The point to import.
* \param buf The input buffer.
* \param ilen The length of the input.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param P The destination context to import the point to.
* This must be initialized.
* \param buf The input buffer. This must be a readable buffer
* of length \p ilen Bytes.
* \param ilen The length of the input buffer \p buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format
* is not implemented.
*
*/
int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp, mbedtls_ecp_point *P,
const unsigned char *buf, size_t ilen );
int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *P,
const unsigned char *buf, size_t ilen );
/**
* \brief This function imports a point from a TLS ECPoint record.
*
* \note On function return, \p buf is updated to point to immediately
* \note On function return, \p *buf is updated to point immediately
* after the ECPoint record.
*
* \param grp The ECP group used.
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param pt The destination point.
* \param buf The address of the pointer to the start of the input buffer.
* \param len The length of the buffer.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
* \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization
* failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
*/
int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp, mbedtls_ecp_point *pt,
const unsigned char **buf, size_t len );
int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *pt,
const unsigned char **buf, size_t len );
/**
* \brief This function exports a point as a TLS ECPoint record.
* \brief This function exports a point as a TLS ECPoint record
* defined in RFC 4492, Section 5.4.
*
* \param grp The ECP group used.
* \param pt The point format to export to. The point format is an
* \c MBEDTLS_ECP_PF_XXX constant.
* \param format The export format.
* \param olen The length of the data written.
* \param buf The buffer to write to.
* \param blen The length of the buffer.
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param pt The point to be exported. This must be initialized.
* \param format The point format to use. This must be either
* #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED.
* \param olen The address at which to store the length in Bytes
* of the data written.
* \param buf The target buffer. This must be a writable buffer of
* length \p blen Bytes.
* \param blen The length of the target buffer \p buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA or
* #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid.
* \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the target buffer
* is too small to hold the exported point.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt,
int format, size_t *olen,
unsigned char *buf, size_t blen );
int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp,
const mbedtls_ecp_point *pt,
int format, size_t *olen,
unsigned char *buf, size_t blen );
/**
* \brief This function sets a group using standardized domain parameters.
* \brief This function sets up an ECP group context
* from a standardized set of domain parameters.
*
* \note The index should be a value of the NamedCurve enum,
* as defined in <em>RFC-4492: Elliptic Curve Cryptography
* (ECC) Cipher Suites for Transport Layer Security (TLS)</em>,
* usually in the form of an \c MBEDTLS_ECP_DP_XXX macro.
*
* \param grp The destination group.
* \param grp The group context to setup. This must be initialized.
* \param id The identifier of the domain parameter set to load.
*
* \return \c 0 on success,
* \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE for unkownn groups.
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if \p id doesn't
* correspond to a known group.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_group_load( mbedtls_ecp_group *grp, mbedtls_ecp_group_id id );
/**
* \brief This function sets a group from a TLS ECParameters record.
* \brief This function sets up an ECP group context from a TLS
* ECParameters record as defined in RFC 4492, Section 5.4.
*
* \note \p buf is updated to point right after the ECParameters record
* on exit.
* \note The read pointer \p buf is updated to point right after
* the ECParameters record on exit.
*
* \param grp The destination group.
* \param grp The group context to setup. This must be initialized.
* \param buf The address of the pointer to the start of the input buffer.
* \param len The length of the buffer.
* \param len The length of the input buffer \c *buf in Bytes.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not
* recognized.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp, const unsigned char **buf, size_t len );
int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp,
const unsigned char **buf, size_t len );
/**
* \brief This function writes the TLS ECParameters record for a group.
* \brief This function extracts an elliptic curve group ID from a
* TLS ECParameters record as defined in RFC 4492, Section 5.4.
*
* \param grp The ECP group used.
* \param olen The number of Bytes written.
* \param buf The buffer to write to.
* \param blen The length of the buffer.
* \note The read pointer \p buf is updated to point right after
* the ECParameters record on exit.
*
* \param grp The address at which to store the group id.
* This must not be \c NULL.
* \param buf The address of the pointer to the start of the input buffer.
* \param len The length of the input buffer \c *buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL on failure.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid.
* \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not
* recognized.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp, size_t *olen,
unsigned char *buf, size_t blen );
int mbedtls_ecp_tls_read_group_id( mbedtls_ecp_group_id *grp,
const unsigned char **buf,
size_t len );
/**
* \brief This function exports an elliptic curve as a TLS
* ECParameters record as defined in RFC 4492, Section 5.4.
*
* \param grp The ECP group to be exported.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param olen The address at which to store the number of Bytes written.
* This must not be \c NULL.
* \param buf The buffer to write to. This must be a writable buffer
* of length \p blen Bytes.
* \param blen The length of the output buffer \p buf in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output
* buffer is too small to hold the exported group.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp,
size_t *olen,
unsigned char *buf, size_t blen );
/**
* \brief This function performs multiplication of a point by
* an integer: \p R = \p m * \p P.
* \brief This function performs a scalar multiplication of a point
* by an integer: \p R = \p m * \p P.
*
* It is not thread-safe to use same group in multiple threads.
*
@@ -582,23 +838,66 @@ int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp, size_t *olen,
* intermediate results to prevent potential timing attacks
* targeting these results. We recommend always providing
* a non-NULL \p f_rng. The overhead is negligible.
* Note: unless #MBEDTLS_ECP_NO_INTERNAL_RNG is defined, when
* \p f_rng is NULL, an internal RNG (seeded from the value
* of \p m) will be used instead.
*
* \param grp The ECP group.
* \param R The destination point.
* \param m The integer by which to multiply.
* \param P The point to multiply.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param R The point in which to store the result of the calculation.
* This must be initialized.
* \param m The integer by which to multiply. This must be initialized.
* \param P The point to multiply. This must be initialized.
* \param f_rng The RNG function. This may be \c NULL if randomization
* of intermediate results isn't desired (discouraged).
* \param p_rng The RNG context to be passed to \p p_rng.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private
* key, or \p P is not a valid public key.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_mul( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief This function performs multiplication of a point by
* an integer: \p R = \p m * \p P in a restartable way.
*
* \see mbedtls_ecp_mul()
*
* \note This function does the same as \c mbedtls_ecp_mul(), but
* it can return early and restart according to the limit set
* with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param R The point in which to store the result of the calculation.
* This must be initialized.
* \param m The integer by which to multiply. This must be initialized.
* \param P The point to multiply. This must be initialized.
* \param f_rng The RNG function. This may be \c NULL if randomization
* of intermediate results isn't desired (discouraged).
* \param p_rng The RNG context to be passed to \p p_rng.
* \param rs_ctx The restart context (NULL disables restart).
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private
* key, or \p P is not a valid public key.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_mul_restartable( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
mbedtls_ecp_restart_ctx *rs_ctx );
/**
* \brief This function performs multiplication and addition of two
* points by integers: \p R = \p m * \p P + \p n * \p Q
@@ -608,23 +907,70 @@ int mbedtls_ecp_mul( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
* \note In contrast to mbedtls_ecp_mul(), this function does not
* guarantee a constant execution flow and timing.
*
* \param grp The ECP group.
* \param R The destination point.
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param R The point in which to store the result of the calculation.
* This must be initialized.
* \param m The integer by which to multiply \p P.
* \param P The point to multiply by \p m.
* This must be initialized.
* \param P The point to multiply by \p m. This must be initialized.
* \param n The integer by which to multiply \p Q.
* This must be initialized.
* \param Q The point to be multiplied by \p n.
* This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not
* valid private keys, or \p P or \p Q are not valid public
* keys.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
const mbedtls_mpi *n, const mbedtls_ecp_point *Q );
/**
* \brief This function performs multiplication and addition of two
* points by integers: \p R = \p m * \p P + \p n * \p Q in a
* restartable way.
*
* \see \c mbedtls_ecp_muladd()
*
* \note This function works the same as \c mbedtls_ecp_muladd(),
* but it can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
* \param grp The ECP group to use.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param R The point in which to store the result of the calculation.
* This must be initialized.
* \param m The integer by which to multiply \p P.
* This must be initialized.
* \param P The point to multiply by \p m. This must be initialized.
* \param n The integer by which to multiply \p Q.
* This must be initialized.
* \param Q The point to be multiplied by \p n.
* This must be initialized.
* \param rs_ctx The restart context (NULL disables restart).
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not
* valid private keys, or \p P or \p Q are not valid public
* keys.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure.
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_muladd_restartable(
mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
const mbedtls_mpi *m, const mbedtls_ecp_point *P,
const mbedtls_mpi *n, const mbedtls_ecp_point *Q,
mbedtls_ecp_restart_ctx *rs_ctx );
/**
* \brief This function checks that a point is a valid public key
* on this curve.
@@ -642,30 +988,60 @@ int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R,
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
* \param grp The curve the point should lie on.
* \param pt The point to check.
* \param grp The ECP group the point should belong to.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param pt The point to check. This must be initialized.
*
* \return \c 0 if the point is a valid public key.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not
* a valid public key for the given curve.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *pt );
int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp,
const mbedtls_ecp_point *pt );
/**
* \brief This function checks that an \p mbedtls_mpi is a valid private
* key for this curve.
* \brief This function checks that an \p mbedtls_mpi is a
* valid private key for this curve.
*
* \note This function uses bare components rather than an
* ::mbedtls_ecp_keypair structure to ease use with other
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
* \param grp The group used.
* \param d The integer to check.
* \param grp The ECP group the private key should belong to.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param d The integer to check. This must be initialized.
*
* \return \c 0 if the point is a valid private key.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY on failure.
* \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not a valid
* private key for the given curve.
* \return Another negative error code on other kinds of failure.
*/
int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *d );
int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp,
const mbedtls_mpi *d );
/**
* \brief This function generates a private key.
*
* \param grp The ECP group to generate a private key for.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param d The destination MPI (secret part). This must be initialized.
* \param f_rng The RNG function. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This may be
* \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_privkey( const mbedtls_ecp_group *grp,
mbedtls_mpi *d,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief This function generates a keypair with a configurable base
@@ -676,22 +1052,29 @@ int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, const mbedtls_mpi *
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
* \param grp The ECP group.
* \param G The chosen base point.
* \param grp The ECP group to generate a key pair for.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param G The base point to use. This must be initialized
* and belong to \p grp. It replaces the default base
* point \c grp->G used by mbedtls_ecp_gen_keypair().
* \param d The destination MPI (secret part).
* This must be initialized.
* \param Q The destination point (public part).
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* This must be initialized.
* \param f_rng The RNG function. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may
* be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
const mbedtls_ecp_point *G,
mbedtls_mpi *d, mbedtls_ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
const mbedtls_ecp_point *G,
mbedtls_mpi *d, mbedtls_ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief This function generates an ECP keypair.
@@ -701,34 +1084,42 @@ int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp,
* structures, such as ::mbedtls_ecdh_context or
* ::mbedtls_ecdsa_context.
*
* \param grp The ECP group.
* \param grp The ECP group to generate a key pair for.
* This must be initialized and have group parameters
* set, for example through mbedtls_ecp_group_load().
* \param d The destination MPI (secret part).
* This must be initialized.
* \param Q The destination point (public part).
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* This must be initialized.
* \param f_rng The RNG function. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may
* be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d,
mbedtls_ecp_point *Q,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief This function generates an ECP key.
*
* \param grp_id The ECP group identifier.
* \param key The destination key.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param key The destination key. This must be initialized.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may
* be \c NULL if \p f_rng doesn't need a context argument.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code
* on failure.
*/
int mbedtls_ecp_gen_key( mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief This function checks that the keypair objects
@@ -736,16 +1127,19 @@ int mbedtls_ecp_gen_key( mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key,
* same public point, and that the private key in
* \p prv is consistent with the public key.
*
* \param pub The keypair structure holding the public key.
* If it contains a private key, that part is ignored.
* \param pub The keypair structure holding the public key. This
* must be initialized. If it contains a private key, that
* part is ignored.
* \param prv The keypair structure holding the full keypair.
* This must be initialized.
*
* \return \c 0 on success, meaning that the keys are valid and match.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the keys are invalid or do not match.
* \return An \c MBEDTLS_ERR_ECP_XXX or an \c MBEDTLS_ERR_MPI_XXX
* error code on calculation failure.
*/
int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub, const mbedtls_ecp_keypair *prv );
int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub,
const mbedtls_ecp_keypair *prv );
#if defined(MBEDTLS_SELF_TEST)

35
externals/mbedtls/include/mbedtls/ecp_internal.h vendored
View File

@@ -5,8 +5,31 @@
* point arithmetic.
*/
/*
* Copyright (C) 2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,7 +45,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
/*
@@ -63,6 +86,12 @@
#ifndef MBEDTLS_ECP_INTERNAL_H
#define MBEDTLS_ECP_INTERNAL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if defined(MBEDTLS_ECP_INTERNAL_ALT)
/**

39
externals/mbedtls/include/mbedtls/entropy.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Entropy accumulator implementation
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ENTROPY_H
#define MBEDTLS_ENTROPY_H
@@ -109,7 +132,7 @@ typedef int (*mbedtls_entropy_f_source_ptr)(void *data, unsigned char *output, s
/**
* \brief Entropy source state
*/
typedef struct
typedef struct mbedtls_entropy_source_state
{
mbedtls_entropy_f_source_ptr f_source; /**< The entropy source callback */
void * p_source; /**< The callback data pointer */
@@ -122,15 +145,17 @@ mbedtls_entropy_source_state;
/**
* \brief Entropy context structure
*/
typedef struct
typedef struct mbedtls_entropy_context
{
int accumulator_started;
int accumulator_started; /* 0 after init.
* 1 after the first update.
* -1 after free. */
#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR)
mbedtls_sha512_context accumulator;
#else
mbedtls_sha256_context accumulator;
#endif
int source_count;
int source_count; /* Number of entries used in source. */
mbedtls_entropy_source_state source[MBEDTLS_ENTROPY_MAX_SOURCES];
#if defined(MBEDTLS_HAVEGE_C)
mbedtls_havege_state havege_data;

29
externals/mbedtls/include/mbedtls/entropy_poll.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Platform-specific and custom entropy polling functions
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ENTROPY_POLL_H
#define MBEDTLS_ENTROPY_POLL_H

49
externals/mbedtls/include/mbedtls/error.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Error to string translation
*/
/*
* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_ERROR_H
#define MBEDTLS_ERROR_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
/**
@@ -76,12 +105,13 @@
* MD4 1 0x002D-0x002D
* MD5 1 0x002F-0x002F
* RIPEMD160 1 0x0031-0x0031
* SHA1 1 0x0035-0x0035
* SHA256 1 0x0037-0x0037
* SHA512 1 0x0039-0x0039
* SHA1 1 0x0035-0x0035 0x0073-0x0073
* SHA256 1 0x0037-0x0037 0x0074-0x0074
* SHA512 1 0x0039-0x0039 0x0075-0x0075
* CHACHA20 3 0x0051-0x0055
* POLY1305 3 0x0057-0x005B
* CHACHAPOLY 2 0x0054-0x0056
* PLATFORM 1 0x0070-0x0072
*
* High-level module nr (3 bits - 0x0...-0x7...)
* Name ID Nr of Errors
@@ -92,12 +122,13 @@
* DHM 3 11
* PK 3 15 (Started from top)
* RSA 4 11
* ECP 4 9 (Started from top)
* ECP 4 10 (Started from top)
* MD 5 5
* HKDF 5 1 (Started from top)
* SSL 5 1 (Started from 0x5E80)
* CIPHER 6 8
* SSL 6 22 (Started from top)
* SSL 7 31
* SSL 6 23 (Started from top)
* SSL 7 32
*
* Module dependent error code (5 bits 0x.00.-0x.F8.)
*/

139
externals/mbedtls/include/mbedtls/gcm.h vendored
View File

@@ -12,8 +12,31 @@
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,12 +52,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_GCM_H
#define MBEDTLS_GCM_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#include <stdint.h>
@@ -43,7 +72,10 @@
#define MBEDTLS_GCM_DECRYPT 0
#define MBEDTLS_ERR_GCM_AUTH_FAILED -0x0012 /**< Authenticated decryption failed. */
/* MBEDTLS_ERR_GCM_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_GCM_HW_ACCEL_FAILED -0x0013 /**< GCM hardware accelerator failed. */
#define MBEDTLS_ERR_GCM_BAD_INPUT -0x0014 /**< Bad input parameters to function. */
#ifdef __cplusplus
@@ -55,7 +87,8 @@ extern "C" {
/**
* \brief The GCM context structure.
*/
typedef struct {
typedef struct mbedtls_gcm_context
{
mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */
uint64_t HL[16]; /*!< Precalculated HTable low. */
uint64_t HH[16]; /*!< Precalculated HTable high. */
@@ -83,7 +116,7 @@ mbedtls_gcm_context;
* cipher, nor set the key. For this purpose, use
* mbedtls_gcm_setkey().
*
* \param ctx The GCM context to initialize.
* \param ctx The GCM context to initialize. This must not be \c NULL.
*/
void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
@@ -91,9 +124,10 @@ void mbedtls_gcm_init( mbedtls_gcm_context *ctx );
* \brief This function associates a GCM context with a
* cipher algorithm and a key.
*
* \param ctx The GCM context to initialize.
* \param ctx The GCM context. This must be initialized.
* \param cipher The 128-bit block cipher to use.
* \param key The encryption key.
* \param key The encryption key. This must be a readable buffer of at
* least \p keybits bits.
* \param keybits The key size in bits. Valid options are:
* <ul><li>128 bits</li>
* <li>192 bits</li>
@@ -120,7 +154,8 @@ int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
* authentic. You should use this function to perform encryption
* only. For decryption, use mbedtls_gcm_auth_decrypt() instead.
*
* \param ctx The GCM context to use for encryption or decryption.
* \param ctx The GCM context to use for encryption or decryption. This
* must be initialized.
* \param mode The operation to perform:
* - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption.
* The ciphertext is written to \p output and the
@@ -134,22 +169,28 @@ int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx,
* calling this function in decryption mode.
* \param length The length of the input data, which is equal to the length
* of the output data.
* \param iv The initialization vector.
* \param iv The initialization vector. This must be a readable buffer of
* at least \p iv_len Bytes.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add The buffer holding the additional data. This must be of at
* least that size in Bytes.
* \param add_len The length of the additional data.
* \param input The buffer holding the input data. Its size is \b length.
* \param output The buffer for holding the output data. It must have room
* for \b length bytes.
* \param input The buffer holding the input data. If \p length is greater
* than zero, this must be a readable buffer of at least that
* size in Bytes.
* \param output The buffer for holding the output data. If \p length is greater
* than zero, this must be a writable buffer of at least that
* size in Bytes.
* \param tag_len The length of the tag to generate.
* \param tag The buffer for holding the tag.
* \param tag The buffer for holding the tag. This must be a writable
* buffer of at least \p tag_len Bytes.
*
* \return \c 0 if the encryption or decryption was performed
* successfully. Note that in #MBEDTLS_GCM_DECRYPT mode,
* this does not indicate that the data is authentic.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
* \return #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
* error code if the encryption or decryption failed.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
* not valid or a cipher-specific error code if the encryption
* or decryption failed.
*/
int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
int mode,
@@ -171,24 +212,30 @@ int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx,
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context.
* \param ctx The GCM context. This must be initialized.
* \param length The length of the ciphertext to decrypt, which is also
* the length of the decrypted plaintext.
* \param iv The initialization vector.
* \param iv The initialization vector. This must be a readable buffer
* of at least \p iv_len Bytes.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data.
* \param add The buffer holding the additional data. This must be of at
* least that size in Bytes.
* \param add_len The length of the additional data.
* \param tag The buffer holding the tag to verify.
* \param tag The buffer holding the tag to verify. This must be a
* readable buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to verify.
* \param input The buffer holding the ciphertext. Its size is \b length.
* \param output The buffer for holding the decrypted plaintext. It must
* have room for \b length bytes.
* \param input The buffer holding the ciphertext. If \p length is greater
* than zero, this must be a readable buffer of at least that
* size.
* \param output The buffer for holding the decrypted plaintext. If \p length
* is greater than zero, this must be a writable buffer of at
* least that size.
*
* \return \c 0 if successful and authenticated.
* \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths are not valid.
* \return #MBEDTLS_ERR_GCM_HW_ACCEL_FAILED or a cipher-specific
* error code if the decryption failed.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are
* not valid or a cipher-specific error code if the decryption
* failed.
*/
int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
size_t length,
@@ -205,15 +252,16 @@ int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx,
* \brief This function starts a GCM encryption or decryption
* operation.
*
* \param ctx The GCM context.
* \param ctx The GCM context. This must be initialized.
* \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or
* #MBEDTLS_GCM_DECRYPT.
* \param iv The initialization vector.
* \param iv The initialization vector. This must be a readable buffer of
* at least \p iv_len Bytes.
* \param iv_len The length of the IV.
* \param add The buffer holding the additional data, or NULL
* if \p add_len is 0.
* \param add_len The length of the additional data. If 0,
* \p add is NULL.
* \param add The buffer holding the additional data, or \c NULL
* if \p add_len is \c 0.
* \param add_len The length of the additional data. If \c 0,
* \p add may be \c NULL.
*
* \return \c 0 on success.
*/
@@ -236,11 +284,15 @@ int mbedtls_gcm_starts( mbedtls_gcm_context *ctx,
* input buffer. If the buffers overlap, the output buffer
* must trail at least 8 Bytes behind the input buffer.
*
* \param ctx The GCM context.
* \param ctx The GCM context. This must be initialized.
* \param length The length of the input data. This must be a multiple of
* 16 except in the last call before mbedtls_gcm_finish().
* \param input The buffer holding the input data.
* \param output The buffer for holding the output data.
* \param input The buffer holding the input data. If \p length is greater
* than zero, this must be a readable buffer of at least that
* size in Bytes.
* \param output The buffer for holding the output data. If \p length is
* greater than zero, this must be a writable buffer of at
* least that size in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
@@ -257,9 +309,11 @@ int mbedtls_gcm_update( mbedtls_gcm_context *ctx,
* It wraps up the GCM stream, and generates the
* tag. The tag can have a maximum length of 16 Bytes.
*
* \param ctx The GCM context.
* \param tag The buffer for holding the tag.
* \param tag_len The length of the tag to generate. Must be at least four.
* \param ctx The GCM context. This must be initialized.
* \param tag The buffer for holding the tag. This must be a writable
* buffer of at least \p tag_len Bytes.
* \param tag_len The length of the tag to generate. This must be at least
* four.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure.
@@ -272,10 +326,13 @@ int mbedtls_gcm_finish( mbedtls_gcm_context *ctx,
* \brief This function clears a GCM context and the underlying
* cipher sub-context.
*
* \param ctx The GCM context to clear.
* \param ctx The GCM context to clear. If this is \c NULL, the call has
* no effect. Otherwise, this must be initialized.
*/
void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The GCM checkup routine.
*
@@ -284,6 +341,8 @@ void mbedtls_gcm_free( mbedtls_gcm_context *ctx );
*/
int mbedtls_gcm_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

37
externals/mbedtls/include/mbedtls/havege.h vendored
View File

@@ -4,8 +4,31 @@
* \brief HAVEGE: HArdware Volatile Entropy Gathering and Expansion
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_HAVEGE_H
#define MBEDTLS_HAVEGE_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#define MBEDTLS_HAVEGE_COLLECT_SIZE 1024
@@ -37,7 +66,7 @@ extern "C" {
/**
* \brief HAVEGE state structure
*/
typedef struct
typedef struct mbedtls_havege_state
{
int PT1, PT2, offset[2];
int pool[MBEDTLS_HAVEGE_COLLECT_SIZE];

69
externals/mbedtls/include/mbedtls/hkdf.h vendored
View File

@@ -7,26 +7,57 @@
* specified by RFC 5869.
*/
/*
* Copyright (C) 2016-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* http://www.apache.org/licenses/LICENSE-2.0
* **********
* Apache License 2.0:
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* This file is part of mbed TLS (https://tls.mbed.org)
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* **********
*/
#ifndef MBEDTLS_HKDF_H
#define MBEDTLS_HKDF_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "md.h"
/**
@@ -73,6 +104,11 @@ int mbedtls_hkdf( const mbedtls_md_info_t *md, const unsigned char *salt,
* \brief Take the input keying material \p ikm and extract from it a
* fixed-length pseudorandom key \p prk.
*
* \warning This function should only be used if the security of it has been
* studied and established in that particular context (eg. TLS 1.3
* key schedule). For standard HKDF security guarantees use
* \c mbedtls_hkdf instead.
*
* \param md A hash function; md.size denotes the length of the
* hash function output in bytes.
* \param salt An optional salt value (a non-secret random value);
@@ -97,10 +133,15 @@ int mbedtls_hkdf_extract( const mbedtls_md_info_t *md,
* \brief Expand the supplied \p prk into several additional pseudorandom
* keys, which is the output of the HKDF.
*
* \warning This function should only be used if the security of it has been
* studied and established in that particular context (eg. TLS 1.3
* key schedule). For standard HKDF security guarantees use
* \c mbedtls_hkdf instead.
*
* \param md A hash function; md.size denotes the length of the hash
* function output in bytes.
* \param prk A pseudorandom key of at least md.size bytes. \p prk is usually,
* the output from the HKDF extract step.
* \param prk A pseudorandom key of at least md.size bytes. \p prk is
* usually the output from the HKDF extract step.
* \param prk_len The length in bytes of \p prk.
* \param info An optional context and application specific information
* string. This can be a zero-length string.

395
externals/mbedtls/include/mbedtls/hmac_drbg.h vendored
View File

@@ -1,11 +1,38 @@
/**
* \file hmac_drbg.h
*
* \brief HMAC_DRBG (NIST SP 800-90A)
* \brief The HMAC_DRBG pseudorandom generator.
*
* This module implements the HMAC_DRBG pseudorandom generator described
* in <em>NIST SP 800-90A: Recommendation for Random Number Generation Using
* Deterministic Random Bit Generators</em>.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +48,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_HMAC_DRBG_H
#define MBEDTLS_HMAC_DRBG_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "md.h"
#if defined(MBEDTLS_THREADING_C)
@@ -76,9 +109,9 @@ extern "C" {
/**
* HMAC_DRBG context.
*/
typedef struct
typedef struct mbedtls_hmac_drbg_context
{
/* Working state: the key K is not stored explicitely,
/* Working state: the key K is not stored explicitly,
* but is implied by the HMAC context */
mbedtls_md_context_t md_ctx; /*!< HMAC context (inc. K) */
unsigned char V[MBEDTLS_MD_MAX_SIZE]; /*!< V in the spec */
@@ -95,43 +128,99 @@ typedef struct
void *p_entropy; /*!< context for the entropy function */
#if defined(MBEDTLS_THREADING_C)
/* Invariant: the mutex is initialized if and only if
* md_ctx->md_info != NULL. This means that the mutex is initialized
* during the initial seeding in mbedtls_hmac_drbg_seed() or
* mbedtls_hmac_drbg_seed_buf() and freed in mbedtls_ctr_drbg_free().
*
* Note that this invariant may change without notice. Do not rely on it
* and do not access the mutex directly in application code.
*/
mbedtls_threading_mutex_t mutex;
#endif
} mbedtls_hmac_drbg_context;
/**
* \brief HMAC_DRBG context initialization
* Makes the context ready for mbedtls_hmac_drbg_seed(),
* mbedtls_hmac_drbg_seed_buf() or
* mbedtls_hmac_drbg_free().
* \brief HMAC_DRBG context initialization.
*
* \param ctx HMAC_DRBG context to be initialized
* This function makes the context ready for mbedtls_hmac_drbg_seed(),
* mbedtls_hmac_drbg_seed_buf() or mbedtls_hmac_drbg_free().
*
* \note The reseed interval is #MBEDTLS_HMAC_DRBG_RESEED_INTERVAL
* by default. Override this value by calling
* mbedtls_hmac_drbg_set_reseed_interval().
*
* \param ctx HMAC_DRBG context to be initialized.
*/
void mbedtls_hmac_drbg_init( mbedtls_hmac_drbg_context *ctx );
/**
* \brief HMAC_DRBG initial seeding
* Seed and setup entropy source for future reseeds.
* \brief HMAC_DRBG initial seeding.
*
* \param ctx HMAC_DRBG context to be seeded
* \param md_info MD algorithm to use for HMAC_DRBG
* \param f_entropy Entropy callback (p_entropy, buffer to fill, buffer
* length)
* \param p_entropy Entropy context
* \param custom Personalization data (Device specific identifiers)
* (Can be NULL)
* \param len Length of personalization data
* Set the initial seed and set up the entropy source for future reseeds.
*
* \note The "security strength" as defined by NIST is set to:
* 128 bits if md_alg is SHA-1,
* 192 bits if md_alg is SHA-224,
* 256 bits if md_alg is SHA-256 or higher.
* A typical choice for the \p f_entropy and \p p_entropy parameters is
* to use the entropy module:
* - \p f_entropy is mbedtls_entropy_func();
* - \p p_entropy is an instance of ::mbedtls_entropy_context initialized
* with mbedtls_entropy_init() (which registers the platform's default
* entropy sources).
*
* You can provide a personalization string in addition to the
* entropy source, to make this instantiation as unique as possible.
*
* \note By default, the security strength as defined by NIST is:
* - 128 bits if \p md_info is SHA-1;
* - 192 bits if \p md_info is SHA-224;
* - 256 bits if \p md_info is SHA-256, SHA-384 or SHA-512.
* Note that SHA-256 is just as efficient as SHA-224.
* The security strength can be reduced if a smaller
* entropy length is set with
* mbedtls_hmac_drbg_set_entropy_len().
*
* \return 0 if successful, or
* MBEDTLS_ERR_MD_BAD_INPUT_DATA, or
* MBEDTLS_ERR_MD_ALLOC_FAILED, or
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED.
* \note The default entropy length is the security strength
* (converted from bits to bytes). You can override
* it by calling mbedtls_hmac_drbg_set_entropy_len().
*
* \note During the initial seeding, this function calls
* the entropy source to obtain a nonce
* whose length is half the entropy length.
*/
#if defined(MBEDTLS_THREADING_C)
/**
* \note When Mbed TLS is built with threading support,
* after this function returns successfully,
* it is safe to call mbedtls_hmac_drbg_random()
* from multiple threads. Other operations, including
* reseeding, are not thread-safe.
*/
#endif /* MBEDTLS_THREADING_C */
/**
* \param ctx HMAC_DRBG context to be seeded.
* \param md_info MD algorithm to use for HMAC_DRBG.
* \param f_entropy The entropy callback, taking as arguments the
* \p p_entropy context, the buffer to fill, and the
* length of the buffer.
* \p f_entropy is always called with a length that is
* less than or equal to the entropy length.
* \param p_entropy The entropy context to pass to \p f_entropy.
* \param custom The personalization string.
* This can be \c NULL, in which case the personalization
* string is empty regardless of the value of \p len.
* \param len The length of the personalization string.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
* and also at most
* #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \p entropy_len * 3 / 2
* where \p entropy_len is the entropy length
* described above.
*
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA if \p md_info is
* invalid.
* \return #MBEDTLS_ERR_MD_ALLOC_FAILED if there was not enough
* memory to allocate context data.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* if the call to \p f_entropy failed.
*/
int mbedtls_hmac_drbg_seed( mbedtls_hmac_drbg_context *ctx,
const mbedtls_md_info_t * md_info,
@@ -142,95 +231,156 @@ int mbedtls_hmac_drbg_seed( mbedtls_hmac_drbg_context *ctx,
/**
* \brief Initilisation of simpified HMAC_DRBG (never reseeds).
* (For use with deterministic ECDSA.)
*
* \param ctx HMAC_DRBG context to be initialised
* \param md_info MD algorithm to use for HMAC_DRBG
* \param data Concatenation of entropy string and additional data
* \param data_len Length of data in bytes
* This function is meant for use in algorithms that need a pseudorandom
* input such as deterministic ECDSA.
*/
#if defined(MBEDTLS_THREADING_C)
/**
* \note When Mbed TLS is built with threading support,
* after this function returns successfully,
* it is safe to call mbedtls_hmac_drbg_random()
* from multiple threads. Other operations, including
* reseeding, are not thread-safe.
*/
#endif /* MBEDTLS_THREADING_C */
/**
* \param ctx HMAC_DRBG context to be initialised.
* \param md_info MD algorithm to use for HMAC_DRBG.
* \param data Concatenation of the initial entropy string and
* the additional data.
* \param data_len Length of \p data in bytes.
*
* \return 0 if successful, or
* MBEDTLS_ERR_MD_BAD_INPUT_DATA, or
* MBEDTLS_ERR_MD_ALLOC_FAILED.
* \return \c 0 if successful. or
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA if \p md_info is
* invalid.
* \return #MBEDTLS_ERR_MD_ALLOC_FAILED if there was not enough
* memory to allocate context data.
*/
int mbedtls_hmac_drbg_seed_buf( mbedtls_hmac_drbg_context *ctx,
const mbedtls_md_info_t * md_info,
const unsigned char *data, size_t data_len );
/**
* \brief Enable / disable prediction resistance (Default: Off)
* \brief This function turns prediction resistance on or off.
* The default value is off.
*
* Note: If enabled, entropy is used for ctx->entropy_len before each call!
* Only use this if you have ample supply of good entropy!
* \note If enabled, entropy is gathered at the beginning of
* every call to mbedtls_hmac_drbg_random_with_add()
* or mbedtls_hmac_drbg_random().
* Only use this if your entropy source has sufficient
* throughput.
*
* \param ctx HMAC_DRBG context
* \param resistance MBEDTLS_HMAC_DRBG_PR_ON or MBEDTLS_HMAC_DRBG_PR_OFF
* \param ctx The HMAC_DRBG context.
* \param resistance #MBEDTLS_HMAC_DRBG_PR_ON or #MBEDTLS_HMAC_DRBG_PR_OFF.
*/
void mbedtls_hmac_drbg_set_prediction_resistance( mbedtls_hmac_drbg_context *ctx,
int resistance );
/**
* \brief Set the amount of entropy grabbed on each reseed
* (Default: given by the security strength, which
* depends on the hash used, see \c mbedtls_hmac_drbg_init() )
* \brief This function sets the amount of entropy grabbed on each
* seed or reseed.
*
* \param ctx HMAC_DRBG context
* \param len Amount of entropy to grab, in bytes
* See the documentation of mbedtls_hmac_drbg_seed() for the default value.
*
* \param ctx The HMAC_DRBG context.
* \param len The amount of entropy to grab, in bytes.
*/
void mbedtls_hmac_drbg_set_entropy_len( mbedtls_hmac_drbg_context *ctx,
size_t len );
/**
* \brief Set the reseed interval
* (Default: MBEDTLS_HMAC_DRBG_RESEED_INTERVAL)
* \brief Set the reseed interval.
*
* \param ctx HMAC_DRBG context
* \param interval Reseed interval
* The reseed interval is the number of calls to mbedtls_hmac_drbg_random()
* or mbedtls_hmac_drbg_random_with_add() after which the entropy function
* is called again.
*
* The default value is #MBEDTLS_HMAC_DRBG_RESEED_INTERVAL.
*
* \param ctx The HMAC_DRBG context.
* \param interval The reseed interval.
*/
void mbedtls_hmac_drbg_set_reseed_interval( mbedtls_hmac_drbg_context *ctx,
int interval );
/**
* \brief HMAC_DRBG update state
* \brief This function updates the state of the HMAC_DRBG context.
*
* \param ctx HMAC_DRBG context
* \param additional Additional data to update state with, or NULL
* \param add_len Length of additional data, or 0
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \note Additional data is optional, pass NULL and 0 as second
* third argument if no additional data is being used.
* \param ctx The HMAC_DRBG context.
* \param additional The data to update the state with.
* If this is \c NULL, there is no additional data.
* \param add_len Length of \p additional in bytes.
* Unused if \p additional is \c NULL.
*
* \return \c 0 on success, or an error from the underlying
* hash calculation.
*/
void mbedtls_hmac_drbg_update( mbedtls_hmac_drbg_context *ctx,
int mbedtls_hmac_drbg_update_ret( mbedtls_hmac_drbg_context *ctx,
const unsigned char *additional, size_t add_len );
/**
* \brief HMAC_DRBG reseeding (extracts data from entropy source)
* \brief This function reseeds the HMAC_DRBG context, that is
* extracts data from the entropy source.
*
* \param ctx HMAC_DRBG context
* \param additional Additional data to add to state (Can be NULL)
* \param len Length of additional data
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \return 0 if successful, or
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* \param ctx The HMAC_DRBG context.
* \param additional Additional data to add to the state.
* If this is \c NULL, there is no additional data
* and \p len should be \c 0.
* \param len The length of the additional data.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT
* and also at most
* #MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT - \p entropy_len
* where \p entropy_len is the entropy length
* (see mbedtls_hmac_drbg_set_entropy_len()).
*
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* if a call to the entropy function failed.
*/
int mbedtls_hmac_drbg_reseed( mbedtls_hmac_drbg_context *ctx,
const unsigned char *additional, size_t len );
/**
* \brief HMAC_DRBG generate random with additional update input
* \brief This function updates an HMAC_DRBG instance with additional
* data and uses it to generate random data.
*
* Note: Automatically reseeds if reseed_counter is reached or PR is enabled.
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*
* \param p_rng HMAC_DRBG context
* \param output Buffer to fill
* \param output_len Length of the buffer
* \param additional Additional data to update with (can be NULL)
* \param add_len Length of additional data (can be 0)
* \note This function is not thread-safe. It is not safe
* to call this function if another thread might be
* concurrently obtaining random numbers from the same
* context or updating or reseeding the same context.
*
* \return 0 if successful, or
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED, or
* MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG, or
* MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG.
* \param p_rng The HMAC_DRBG context. This must be a pointer to a
* #mbedtls_hmac_drbg_context structure.
* \param output The buffer to fill.
* \param output_len The length of the buffer in bytes.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
* \param additional Additional data to update with.
* If this is \c NULL, there is no additional data
* and \p add_len should be \c 0.
* \param add_len The length of the additional data.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_INPUT.
*
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* if a call to the entropy source failed.
* \return #MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG if
* \p output_len > #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
* \return #MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG if
* \p add_len > #MBEDTLS_HMAC_DRBG_MAX_INPUT.
*/
int mbedtls_hmac_drbg_random_with_add( void *p_rng,
unsigned char *output, size_t output_len,
@@ -238,49 +388,93 @@ int mbedtls_hmac_drbg_random_with_add( void *p_rng,
size_t add_len );
/**
* \brief HMAC_DRBG generate random
* \brief This function uses HMAC_DRBG to generate random data.
*
* Note: Automatically reseeds if reseed_counter is reached or PR is enabled.
* This function automatically reseeds if the reseed counter is exceeded
* or prediction resistance is enabled.
*/
#if defined(MBEDTLS_THREADING_C)
/**
* \note When Mbed TLS is built with threading support,
* it is safe to call mbedtls_ctr_drbg_random()
* from multiple threads. Other operations, including
* reseeding, are not thread-safe.
*/
#endif /* MBEDTLS_THREADING_C */
/**
* \param p_rng The HMAC_DRBG context. This must be a pointer to a
* #mbedtls_hmac_drbg_context structure.
* \param output The buffer to fill.
* \param out_len The length of the buffer in bytes.
* This must be at most #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
*
* \param p_rng HMAC_DRBG context
* \param output Buffer to fill
* \param out_len Length of the buffer
*
* \return 0 if successful, or
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED, or
* MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* if a call to the entropy source failed.
* \return #MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG if
* \p out_len > #MBEDTLS_HMAC_DRBG_MAX_REQUEST.
*/
int mbedtls_hmac_drbg_random( void *p_rng, unsigned char *output, size_t out_len );
/**
* \brief Free an HMAC_DRBG context
* \brief This function resets HMAC_DRBG context to the state immediately
* after initial call of mbedtls_hmac_drbg_init().
*
* \param ctx HMAC_DRBG context to free.
* \param ctx The HMAC_DRBG context to free.
*/
void mbedtls_hmac_drbg_free( mbedtls_hmac_drbg_context *ctx );
#if ! defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function updates the state of the HMAC_DRBG context.
*
* \deprecated Superseded by mbedtls_hmac_drbg_update_ret()
* in 2.16.0.
*
* \param ctx The HMAC_DRBG context.
* \param additional The data to update the state with.
* If this is \c NULL, there is no additional data.
* \param add_len Length of \p additional in bytes.
* Unused if \p additional is \c NULL.
*/
MBEDTLS_DEPRECATED void mbedtls_hmac_drbg_update(
mbedtls_hmac_drbg_context *ctx,
const unsigned char *additional, size_t add_len );
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_FS_IO)
/**
* \brief Write a seed file
* \brief This function writes a seed file.
*
* \param ctx HMAC_DRBG context
* \param path Name of the file
* \param ctx The HMAC_DRBG context.
* \param path The name of the file.
*
* \return 0 if successful, 1 on file error, or
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED
* \return \c 0 on success.
* \return #MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED on reseed
* failure.
*/
int mbedtls_hmac_drbg_write_seed_file( mbedtls_hmac_drbg_context *ctx, const char *path );
/**
* \brief Read and update a seed file. Seed is added to this
* instance
* \brief This function reads and updates a seed file. The seed
* is added to this instance.
*
* \param ctx HMAC_DRBG context
* \param path Name of the file
* \param ctx The HMAC_DRBG context.
* \param path The name of the file.
*
* \return 0 if successful, 1 on file error,
* MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED or
* MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG
* \return \c 0 on success.
* \return #MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR on file error.
* \return #MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED on
* reseed failure.
* \return #MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG if the existing
* seed file is too large.
*/
int mbedtls_hmac_drbg_update_seed_file( mbedtls_hmac_drbg_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */
@@ -288,9 +482,10 @@ int mbedtls_hmac_drbg_update_seed_file( mbedtls_hmac_drbg_context *ctx, const ch
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
* \brief The HMAC_DRBG Checkup routine.
*
* \return 0 if successful, or 1 if the test failed
* \return \c 0 if successful.
* \return \c 1 if the test failed.
*/
int mbedtls_hmac_drbg_self_test( int verbose );
#endif

36
externals/mbedtls/include/mbedtls/md.h vendored
View File

@@ -6,8 +6,31 @@
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,7 +46,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_MD_H
@@ -41,6 +64,8 @@
#define MBEDTLS_ERR_MD_BAD_INPUT_DATA -0x5100 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_MD_ALLOC_FAILED -0x5180 /**< Failed to allocate memory. */
#define MBEDTLS_ERR_MD_FILE_IO_ERROR -0x5200 /**< Opening or reading of file failed. */
/* MBEDTLS_ERR_MD_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_MD_HW_ACCEL_FAILED -0x5280 /**< MD hardware accelerator failed. */
#ifdef __cplusplus
@@ -82,7 +107,8 @@ typedef struct mbedtls_md_info_t mbedtls_md_info_t;
/**
* The generic message-digest context.
*/
typedef struct {
typedef struct mbedtls_md_context_t
{
/** Information about the associated message digest. */
const mbedtls_md_info_t *md_info;
@@ -97,6 +123,8 @@ typedef struct {
* \brief This function returns the list of digests supported by the
* generic digest module.
*
* \note The list starts with the strongest available hashes.
*
* \return A statically allocated array of digests. Each element
* in the returned list is an integer belonging to the
* message-digest enumeration #mbedtls_md_type_t.

36
externals/mbedtls/include/mbedtls/md2.h vendored
View File

@@ -8,8 +8,31 @@
* instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*
*/
#ifndef MBEDTLS_MD2_H
@@ -39,6 +62,7 @@
#include <stddef.h>
/* MBEDTLS_ERR_MD2_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_MD2_HW_ACCEL_FAILED -0x002B /**< MD2 hardware accelerator failed */
#ifdef __cplusplus
@@ -57,7 +81,7 @@ extern "C" {
* stronger message digests instead.
*
*/
typedef struct
typedef struct mbedtls_md2_context
{
unsigned char cksum[16]; /*!< checksum of the data block */
unsigned char state[48]; /*!< intermediate digest state */
@@ -284,6 +308,8 @@ MBEDTLS_DEPRECATED void mbedtls_md2( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -296,6 +322,8 @@ MBEDTLS_DEPRECATED void mbedtls_md2( const unsigned char *input,
*/
int mbedtls_md2_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

36
externals/mbedtls/include/mbedtls/md4.h vendored
View File

@@ -8,8 +8,31 @@
* instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*
*/
#ifndef MBEDTLS_MD4_H
@@ -40,6 +63,7 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_MD4_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_MD4_HW_ACCEL_FAILED -0x002D /**< MD4 hardware accelerator failed */
#ifdef __cplusplus
@@ -58,7 +82,7 @@ extern "C" {
* stronger message digests instead.
*
*/
typedef struct
typedef struct mbedtls_md4_context
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[4]; /*!< intermediate digest state */
@@ -289,6 +313,8 @@ MBEDTLS_DEPRECATED void mbedtls_md4( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -301,6 +327,8 @@ MBEDTLS_DEPRECATED void mbedtls_md4( const unsigned char *input,
*/
int mbedtls_md4_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

36
externals/mbedtls/include/mbedtls/md5.h vendored
View File

@@ -8,8 +8,31 @@
* digests instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_MD5_H
#define MBEDTLS_MD5_H
@@ -39,6 +62,7 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_MD5_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_MD5_HW_ACCEL_FAILED -0x002F /**< MD5 hardware accelerator failed */
#ifdef __cplusplus
@@ -57,7 +81,7 @@ extern "C" {
* stronger message digests instead.
*
*/
typedef struct
typedef struct mbedtls_md5_context
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[4]; /*!< intermediate digest state */
@@ -289,6 +313,8 @@ MBEDTLS_DEPRECATED void mbedtls_md5( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -301,6 +327,8 @@ MBEDTLS_DEPRECATED void mbedtls_md5( const unsigned char *input,
*/
int mbedtls_md5_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

29
externals/mbedtls/include/mbedtls/md_internal.h vendored
View File

@@ -8,8 +8,31 @@
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +48,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_MD_WRAP_H
#define MBEDTLS_MD_WRAP_H

29
externals/mbedtls/include/mbedtls/memory_buffer_alloc.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Buffer-based memory allocator
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_MEMORY_BUFFER_ALLOC_H
#define MBEDTLS_MEMORY_BUFFER_ALLOC_H

34
externals/mbedtls/include/mbedtls/net.h vendored
View File

@@ -6,8 +6,31 @@
* \deprecated Superseded by mbedtls/net_sockets.h
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,8 +46,13 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#include "net_sockets.h"

49
externals/mbedtls/include/mbedtls/net_sockets.h vendored
View File

@@ -20,8 +20,31 @@
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,7 +60,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_NET_SOCKETS_H
#define MBEDTLS_NET_SOCKETS_H
@@ -86,7 +109,7 @@ extern "C" {
* (eg two file descriptors for combined IPv4 + IPv6 support, or additional
* structures for hand-made UDP demultiplexing).
*/
typedef struct
typedef struct mbedtls_net_context
{
int fd; /**< The underlying file descriptor */
}
@@ -128,6 +151,7 @@ int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char
*
* \return 0 if successful, or one of:
* MBEDTLS_ERR_NET_SOCKET_FAILED,
* MBEDTLS_ERR_NET_UNKNOWN_HOST,
* MBEDTLS_ERR_NET_BIND_FAILED,
* MBEDTLS_ERR_NET_LISTEN_FAILED
*
@@ -147,6 +171,8 @@ int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char
* can be NULL if client_ip is null
*
* \return 0 if successful, or
* MBEDTLS_ERR_NET_SOCKET_FAILED,
* MBEDTLS_ERR_NET_BIND_FAILED,
* MBEDTLS_ERR_NET_ACCEPT_FAILED, or
* MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small,
* MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to
@@ -159,6 +185,10 @@ int mbedtls_net_accept( mbedtls_net_context *bind_ctx,
/**
* \brief Check and wait for the context to be ready for read/write
*
* \note The current implementation of this function uses
* select() and returns an error if the file descriptor
* is \c FD_SETSIZE or greater.
*
* \param ctx Socket to check
* \param rw Bitflag composed of MBEDTLS_NET_POLL_READ and
* MBEDTLS_NET_POLL_WRITE specifying the events
@@ -240,16 +270,21 @@ int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len );
* 'timeout' seconds. If no error occurs, the actual amount
* read is returned.
*
* \note The current implementation of this function uses
* select() and returns an error if the file descriptor
* is \c FD_SETSIZE or greater.
*
* \param ctx Socket
* \param buf The buffer to write to
* \param len Maximum length of the buffer
* \param timeout Maximum number of milliseconds to wait for data
* 0 means no timeout (wait forever)
*
* \return the number of bytes received,
* or a non-zero error code:
* MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out,
* \return The number of bytes received if successful.
* MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out.
* MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal.
* Another negative error code (MBEDTLS_ERR_NET_xxx)
* for other failures.
*
* \note This function will block (until data becomes available or
* timeout is reached) even if the socket is set to

35
externals/mbedtls/include/mbedtls/nist_kw.h vendored
View File

@@ -16,8 +16,31 @@
*
*/
/*
* Copyright (C) 2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,12 +56,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_NIST_KW_H
#define MBEDTLS_NIST_KW_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#ifdef __cplusplus

32
externals/mbedtls/include/mbedtls/oid.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Object Identifier (OID) database
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_OID_H
#define MBEDTLS_OID_H
@@ -405,7 +428,8 @@ extern "C" {
/**
* \brief Base OID descriptor structure
*/
typedef struct {
typedef struct mbedtls_oid_descriptor_t
{
const char *asn1; /*!< OID ASN.1 representation */
size_t asn1_len; /*!< length of asn1 */
const char *name; /*!< official name (e.g. from RFC) */

71
externals/mbedtls/include/mbedtls/padlock.h vendored
View File

@@ -3,10 +3,36 @@
*
* \brief VIA PadLock ACE for HW encryption/decryption supported by some
* processors
*
* \warning These functions are only for internal use by other library
* functions; you must not call them directly.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,11 +48,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PADLOCK_H
#define MBEDTLS_PADLOCK_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "aes.h"
#define MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED -0x0030 /**< Input data should be aligned. */
@@ -52,14 +84,17 @@
#define MBEDTLS_PADLOCK_PHE 0x0C00
#define MBEDTLS_PADLOCK_PMM 0x3000
#define MBEDTLS_PADLOCK_ALIGN16(x) (uint32_t *) (16 + ((int32_t) x & ~15))
#define MBEDTLS_PADLOCK_ALIGN16(x) (uint32_t *) (16 + ((int32_t) (x) & ~15))
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief PadLock detection routine
* \brief Internal PadLock detection routine
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param feature The feature to detect
*
@@ -68,7 +103,10 @@ extern "C" {
int mbedtls_padlock_has_support( int feature );
/**
* \brief PadLock AES-ECB block en(de)cryption
* \brief Internal PadLock AES-ECB block en(de)cryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -78,12 +116,15 @@ int mbedtls_padlock_has_support( int feature );
* \return 0 if success, 1 if operation failed
*/
int mbedtls_padlock_xcryptecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
int mode,
const unsigned char input[16],
unsigned char output[16] );
/**
* \brief PadLock AES-CBC buffer en(de)cryption
* \brief Internal PadLock AES-CBC buffer en(de)cryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -95,11 +136,11 @@ int mbedtls_padlock_xcryptecb( mbedtls_aes_context *ctx,
* \return 0 if success, 1 if operation failed
*/
int mbedtls_padlock_xcryptcbc( mbedtls_aes_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#ifdef __cplusplus
}

67
externals/mbedtls/include/mbedtls/pem.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Privacy Enhanced Mail (PEM) decoding
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PEM_H
#define MBEDTLS_PEM_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
/**
@@ -53,7 +82,7 @@ extern "C" {
/**
* \brief PEM context structure
*/
typedef struct
typedef struct mbedtls_pem_context
{
unsigned char *buf; /*!< buffer for decoded data */
size_t buflen; /*!< length of the buffer */
@@ -108,17 +137,27 @@ void mbedtls_pem_free( mbedtls_pem_context *ctx );
* \brief Write a buffer of PEM information from a DER encoded
* buffer.
*
* \param header header string to write
* \param footer footer string to write
* \param der_data DER data to write
* \param der_len length of the DER data
* \param buf buffer to write to
* \param buf_len length of output buffer
* \param olen total length written / required (if buf_len is not enough)
* \param header The header string to write.
* \param footer The footer string to write.
* \param der_data The DER data to encode.
* \param der_len The length of the DER data \p der_data in Bytes.
* \param buf The buffer to write to.
* \param buf_len The length of the output buffer \p buf in Bytes.
* \param olen The address at which to store the total length written
* or required (if \p buf_len is not enough).
*
* \return 0 on success, or a specific PEM or BASE64 error code. On
* MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL olen is the required
* size.
* \note You may pass \c NULL for \p buf and \c 0 for \p buf_len
* to request the length of the resulting PEM buffer in
* `*olen`.
*
* \note This function may be called with overlapping \p der_data
* and \p buf buffers.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL if \p buf isn't large
* enough to hold the PEM buffer. In this case, `*olen` holds
* the required minimum size of \p buf.
* \return Another PEM or BASE64 error code on other kinds of failure.
*/
int mbedtls_pem_write_buffer( const char *header, const char *footer,
const unsigned char *der_data, size_t der_len,

258
externals/mbedtls/include/mbedtls/pk.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Public Key abstraction layer
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PK_H
@@ -66,6 +89,8 @@
#define MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE -0x3A00 /**< Elliptic curve is unsupported (only NIST curves are supported). */
#define MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE -0x3980 /**< Unavailable feature, e.g. RSA disabled for RSA key. */
#define MBEDTLS_ERR_PK_SIG_LEN_MISMATCH -0x3900 /**< The buffer contains a valid signature followed by more data. */
/* MBEDTLS_ERR_PK_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_PK_HW_ACCEL_FAILED -0x3880 /**< PK hardware accelerator failed. */
#ifdef __cplusplus
@@ -89,7 +114,7 @@ typedef enum {
* \brief Options for RSASSA-PSS signature verification.
* See \c mbedtls_rsa_rsassa_pss_verify_ext()
*/
typedef struct
typedef struct mbedtls_pk_rsassa_pss_options
{
mbedtls_md_type_t mgf1_hash_id;
int expected_salt_len;
@@ -109,7 +134,7 @@ typedef enum
/**
* \brief Item to send to the debug module
*/
typedef struct
typedef struct mbedtls_pk_debug_item
{
mbedtls_pk_debug_type type;
const char *name;
@@ -127,12 +152,26 @@ typedef struct mbedtls_pk_info_t mbedtls_pk_info_t;
/**
* \brief Public key container
*/
typedef struct
typedef struct mbedtls_pk_context
{
const mbedtls_pk_info_t * pk_info; /**< Public key informations */
const mbedtls_pk_info_t * pk_info; /**< Public key information */
void * pk_ctx; /**< Underlying public key context */
} mbedtls_pk_context;
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Context for resuming operations
*/
typedef struct
{
const mbedtls_pk_info_t * pk_info; /**< Public key information */
void * rs_ctx; /**< Underlying restart context */
} mbedtls_pk_restart_ctx;
#else /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
/* Now we can declare functions that take a pointer to that */
typedef void mbedtls_pk_restart_ctx;
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
#if defined(MBEDTLS_RSA_C)
/**
* Quick access to an RSA context inside a PK context.
@@ -183,20 +222,45 @@ typedef size_t (*mbedtls_pk_rsa_alt_key_len_func)( void *ctx );
const mbedtls_pk_info_t *mbedtls_pk_info_from_type( mbedtls_pk_type_t pk_type );
/**
* \brief Initialize a mbedtls_pk_context (as NONE)
* \brief Initialize a #mbedtls_pk_context (as NONE).
*
* \param ctx The context to initialize.
* This must not be \c NULL.
*/
void mbedtls_pk_init( mbedtls_pk_context *ctx );
/**
* \brief Free a mbedtls_pk_context
* \brief Free the components of a #mbedtls_pk_context.
*
* \param ctx The context to clear. It must have been initialized.
* If this is \c NULL, this function does nothing.
*/
void mbedtls_pk_free( mbedtls_pk_context *ctx );
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Initialize a restart context
*
* \param ctx The context to initialize.
* This must not be \c NULL.
*/
void mbedtls_pk_restart_init( mbedtls_pk_restart_ctx *ctx );
/**
* \brief Free the components of a restart context
*
* \param ctx The context to clear. It must have been initialized.
* If this is \c NULL, this function does nothing.
*/
void mbedtls_pk_restart_free( mbedtls_pk_restart_ctx *ctx );
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
/**
* \brief Initialize a PK context with the information given
* and allocates the type-specific PK subcontext.
*
* \param ctx Context to initialize. Must be empty (type NONE).
* \param ctx Context to initialize. It must not have been set
* up yet (type #MBEDTLS_PK_NONE).
* \param info Information to use
*
* \return 0 on success,
@@ -212,7 +276,8 @@ int mbedtls_pk_setup( mbedtls_pk_context *ctx, const mbedtls_pk_info_t *info );
/**
* \brief Initialize an RSA-alt context
*
* \param ctx Context to initialize. Must be empty (type NONE).
* \param ctx Context to initialize. It must not have been set
* up yet (type #MBEDTLS_PK_NONE).
* \param key RSA key pointer
* \param decrypt_func Decryption function
* \param sign_func Signing function
@@ -232,7 +297,7 @@ int mbedtls_pk_setup_rsa_alt( mbedtls_pk_context *ctx, void * key,
/**
* \brief Get the size in bits of the underlying key
*
* \param ctx Context to use
* \param ctx The context to query. It must have been initialized.
*
* \return Key size in bits, or 0 on error
*/
@@ -240,7 +305,8 @@ size_t mbedtls_pk_get_bitlen( const mbedtls_pk_context *ctx );
/**
* \brief Get the length in bytes of the underlying key
* \param ctx Context to use
*
* \param ctx The context to query. It must have been initialized.
*
* \return Key length in bytes, or 0 on error
*/
@@ -252,18 +318,21 @@ static inline size_t mbedtls_pk_get_len( const mbedtls_pk_context *ctx )
/**
* \brief Tell if a context can do the operation given by type
*
* \param ctx Context to test
* \param type Target type
* \param ctx The context to query. It must have been initialized.
* \param type The desired type.
*
* \return 0 if context can't do the operations,
* 1 otherwise.
* \return 1 if the context can do operations on the given type.
* \return 0 if the context cannot do the operations on the given
* type. This is always the case for a context that has
* been initialized but not set up, or that has been
* cleared with mbedtls_pk_free().
*/
int mbedtls_pk_can_do( const mbedtls_pk_context *ctx, mbedtls_pk_type_t type );
/**
* \brief Verify signature (including padding if relevant).
*
* \param ctx PK context to use
* \param ctx The PK context to use. It must have been set up.
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
@@ -288,13 +357,39 @@ int mbedtls_pk_verify( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len );
/**
* \brief Restartable version of \c mbedtls_pk_verify()
*
* \note Performs the same job as \c mbedtls_pk_verify(), but can
* return early and restart according to the limit set with
* \c mbedtls_ecp_set_max_ops() to reduce blocking for ECC
* operations. For RSA, same as \c mbedtls_pk_verify().
*
* \param ctx The PK context to use. It must have been set up.
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
* \param sig Signature to verify
* \param sig_len Signature length
* \param rs_ctx Restart context (NULL to disable restart)
*
* \return See \c mbedtls_pk_verify(), or
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
*/
int mbedtls_pk_verify_restartable( mbedtls_pk_context *ctx,
mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len,
mbedtls_pk_restart_ctx *rs_ctx );
/**
* \brief Verify signature, with options.
* (Includes verification of the padding depending on type.)
*
* \param type Signature type (inc. possible padding type) to verify
* \param options Pointer to type-specific options, or NULL
* \param ctx PK context to use
* \param ctx The PK context to use. It must have been set up.
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
@@ -325,7 +420,8 @@ int mbedtls_pk_verify_ext( mbedtls_pk_type_t type, const void *options,
/**
* \brief Make signature, including padding if relevant.
*
* \param ctx PK context to use - must hold a private key
* \param ctx The PK context to use. It must have been set up
* with a private key.
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
@@ -345,16 +441,55 @@ int mbedtls_pk_verify_ext( mbedtls_pk_type_t type, const void *options,
*
* \note For RSA, md_alg may be MBEDTLS_MD_NONE if hash_len != 0.
* For ECDSA, md_alg may never be MBEDTLS_MD_NONE.
*
* \note In order to ensure enough space for the signature, the
* \p sig buffer size must be of at least
* `max(MBEDTLS_ECDSA_MAX_LEN, MBEDTLS_MPI_MAX_SIZE)` bytes.
*/
int mbedtls_pk_sign( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
unsigned char *sig, size_t *sig_len,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief Restartable version of \c mbedtls_pk_sign()
*
* \note Performs the same job as \c mbedtls_pk_sign(), but can
* return early and restart according to the limit set with
* \c mbedtls_ecp_set_max_ops() to reduce blocking for ECC
* operations. For RSA, same as \c mbedtls_pk_sign().
*
* \note In order to ensure enough space for the signature, the
* \p sig buffer size must be of at least
* `max(MBEDTLS_ECDSA_MAX_LEN, MBEDTLS_MPI_MAX_SIZE)` bytes.
*
* \param ctx The PK context to use. It must have been set up
* with a private key.
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
* \param sig Place to write the signature
* \param sig_len Number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param rs_ctx Restart context (NULL to disable restart)
*
* \return See \c mbedtls_pk_sign(), or
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
*/
int mbedtls_pk_sign_restartable( mbedtls_pk_context *ctx,
mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
unsigned char *sig, size_t *sig_len,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
mbedtls_pk_restart_ctx *rs_ctx );
/**
* \brief Decrypt message (including padding if relevant).
*
* \param ctx PK context to use - must hold a private key
* \param ctx The PK context to use. It must have been set up
* with a private key.
* \param input Input to decrypt
* \param ilen Input size
* \param output Decrypted output
@@ -375,7 +510,7 @@ int mbedtls_pk_decrypt( mbedtls_pk_context *ctx,
/**
* \brief Encrypt message (including padding if relevant).
*
* \param ctx PK context to use
* \param ctx The PK context to use. It must have been set up.
* \param input Message to encrypt
* \param ilen Message size
* \param output Encrypted output
@@ -406,7 +541,7 @@ int mbedtls_pk_check_pair( const mbedtls_pk_context *pub, const mbedtls_pk_conte
/**
* \brief Export debug information
*
* \param ctx Context to use
* \param ctx The PK context to use. It must have been initialized.
* \param items Place to write debug items
*
* \return 0 on success or MBEDTLS_ERR_PK_BAD_INPUT_DATA
@@ -416,7 +551,7 @@ int mbedtls_pk_debug( const mbedtls_pk_context *ctx, mbedtls_pk_debug_item *item
/**
* \brief Access the type name
*
* \param ctx Context to use
* \param ctx The PK context to use. It must have been initialized.
*
* \return Type name on success, or "invalid PK"
*/
@@ -425,9 +560,10 @@ const char * mbedtls_pk_get_name( const mbedtls_pk_context *ctx );
/**
* \brief Get the key type
*
* \param ctx Context to use
* \param ctx The PK context to use. It must have been initialized.
*
* \return Type on success, or MBEDTLS_PK_NONE
* \return Type on success.
* \return #MBEDTLS_PK_NONE for a context that has not been set up.
*/
mbedtls_pk_type_t mbedtls_pk_get_type( const mbedtls_pk_context *ctx );
@@ -436,12 +572,22 @@ mbedtls_pk_type_t mbedtls_pk_get_type( const mbedtls_pk_context *ctx );
/**
* \brief Parse a private key in PEM or DER format
*
* \param ctx key to be initialized
* \param key input buffer
* \param keylen size of the buffer
* (including the terminating null byte for PEM data)
* \param pwd password for decryption (optional)
* \param pwdlen size of the password
* \param ctx The PK context to fill. It must have been initialized
* but not set up.
* \param key Input buffer to parse.
* The buffer must contain the input exactly, with no
* extra trailing material. For PEM, the buffer must
* contain a null-terminated string.
* \param keylen Size of \b key in bytes.
* For PEM data, this includes the terminating null byte,
* so \p keylen must be equal to `strlen(key) + 1`.
* \param pwd Optional password for decryption.
* Pass \c NULL if expecting a non-encrypted key.
* Pass a string of \p pwdlen bytes if expecting an encrypted
* key; a non-encrypted key will also be accepted.
* The empty password is not supported.
* \param pwdlen Size of the password in bytes.
* Ignored if \p pwd is \c NULL.
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
@@ -459,10 +605,15 @@ int mbedtls_pk_parse_key( mbedtls_pk_context *ctx,
/**
* \brief Parse a public key in PEM or DER format
*
* \param ctx key to be initialized
* \param key input buffer
* \param keylen size of the buffer
* (including the terminating null byte for PEM data)
* \param ctx The PK context to fill. It must have been initialized
* but not set up.
* \param key Input buffer to parse.
* The buffer must contain the input exactly, with no
* extra trailing material. For PEM, the buffer must
* contain a null-terminated string.
* \param keylen Size of \b key in bytes.
* For PEM data, this includes the terminating null byte,
* so \p keylen must be equal to `strlen(key) + 1`.
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
@@ -480,9 +631,14 @@ int mbedtls_pk_parse_public_key( mbedtls_pk_context *ctx,
/**
* \brief Load and parse a private key
*
* \param ctx key to be initialized
* \param ctx The PK context to fill. It must have been initialized
* but not set up.
* \param path filename to read the private key from
* \param password password to decrypt the file (can be NULL)
* \param password Optional password to decrypt the file.
* Pass \c NULL if expecting a non-encrypted key.
* Pass a null-terminated string if expecting an encrypted
* key; a non-encrypted key will also be accepted.
* The empty password is not supported.
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
@@ -499,7 +655,8 @@ int mbedtls_pk_parse_keyfile( mbedtls_pk_context *ctx,
/**
* \brief Load and parse a public key
*
* \param ctx key to be initialized
* \param ctx The PK context to fill. It must have been initialized
* but not set up.
* \param path filename to read the public key from
*
* \note On entry, ctx must be empty, either freshly initialised
@@ -522,7 +679,7 @@ int mbedtls_pk_parse_public_keyfile( mbedtls_pk_context *ctx, const char *path )
* return value to determine where you should start
* using the buffer
*
* \param ctx private to write away
* \param ctx PK context which must contain a valid private key.
* \param buf buffer to write to
* \param size size of the buffer
*
@@ -537,7 +694,7 @@ int mbedtls_pk_write_key_der( mbedtls_pk_context *ctx, unsigned char *buf, size_
* return value to determine where you should start
* using the buffer
*
* \param ctx public key to write away
* \param ctx PK context which must contain a valid public or private key.
* \param buf buffer to write to
* \param size size of the buffer
*
@@ -550,9 +707,10 @@ int mbedtls_pk_write_pubkey_der( mbedtls_pk_context *ctx, unsigned char *buf, si
/**
* \brief Write a public key to a PEM string
*
* \param ctx public key to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param ctx PK context which must contain a valid public or private key.
* \param buf Buffer to write to. The output includes a
* terminating null byte.
* \param size Size of the buffer in bytes.
*
* \return 0 if successful, or a specific error code
*/
@@ -561,9 +719,10 @@ int mbedtls_pk_write_pubkey_pem( mbedtls_pk_context *ctx, unsigned char *buf, si
/**
* \brief Write a private key to a PKCS#1 or SEC1 PEM string
*
* \param ctx private to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param ctx PK context which must contain a valid private key.
* \param buf Buffer to write to. The output includes a
* terminating null byte.
* \param size Size of the buffer in bytes.
*
* \return 0 if successful, or a specific error code
*/
@@ -582,7 +741,8 @@ int mbedtls_pk_write_key_pem( mbedtls_pk_context *ctx, unsigned char *buf, size_
*
* \param p the position in the ASN.1 data
* \param end end of the buffer
* \param pk the key to fill
* \param pk The PK context to fill. It must have been initialized
* but not set up.
*
* \return 0 if successful, or a specific PK error code
*/
@@ -597,7 +757,7 @@ int mbedtls_pk_parse_subpubkey( unsigned char **p, const unsigned char *end,
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param key public key to write away
* \param key PK context which must contain a valid public or private key.
*
* \return the length written or a negative error code
*/

52
externals/mbedtls/include/mbedtls/pk_internal.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Public Key abstraction layer: wrapper functions
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PK_WRAP_H
@@ -61,6 +84,21 @@ struct mbedtls_pk_info_t
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/** Verify signature (restartable) */
int (*verify_rs_func)( void *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len,
void *rs_ctx );
/** Make signature (restartable) */
int (*sign_rs_func)( void *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
unsigned char *sig, size_t *sig_len,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng, void *rs_ctx );
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
/** Decrypt message */
int (*decrypt_func)( void *ctx, const unsigned char *input, size_t ilen,
unsigned char *output, size_t *olen, size_t osize,
@@ -82,6 +120,14 @@ struct mbedtls_pk_info_t
/** Free the given context */
void (*ctx_free_func)( void *ctx );
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/** Allocate the restart context */
void * (*rs_alloc_func)( void );
/** Free the restart context */
void (*rs_free_func)( void *rs_ctx );
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
/** Interface with the debug module */
void (*debug_func)( const void *ctx, mbedtls_pk_debug_item *items );

32
externals/mbedtls/include/mbedtls/pkcs11.h vendored
View File

@@ -6,8 +6,31 @@
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,7 +46,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PKCS11_H
#define MBEDTLS_PKCS11_H
@@ -52,7 +75,8 @@ extern "C" {
/**
* Context for PKCS #11 private keys.
*/
typedef struct {
typedef struct mbedtls_pkcs11_context
{
pkcs11h_certificate_t pkcs11h_cert;
int len;
} mbedtls_pkcs11_context;

39
externals/mbedtls/include/mbedtls/pkcs12.h vendored
View File

@@ -4,8 +4,31 @@
* \brief PKCS#12 Personal Information Exchange Syntax
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PKCS12_H
#define MBEDTLS_PKCS12_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "md.h"
#include "cipher.h"
#include "asn1.h"
@@ -48,6 +77,8 @@
extern "C" {
#endif
#if defined(MBEDTLS_ASN1_PARSE_C)
/**
* \brief PKCS12 Password Based function (encryption / decryption)
* for pbeWithSHAAnd128BitRC4
@@ -89,6 +120,8 @@ int mbedtls_pkcs12_pbe( mbedtls_asn1_buf *pbe_params, int mode,
const unsigned char *input, size_t len,
unsigned char *output );
#endif /* MBEDTLS_ASN1_PARSE_C */
/**
* \brief The PKCS#12 derivation function uses a password and a salt
* to produce pseudo-random bits for a particular "purpose".

43
externals/mbedtls/include/mbedtls/pkcs5.h vendored
View File

@@ -6,8 +6,31 @@
* \author Mathias Olsson <mathias@kompetensum.com>
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,11 +46,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PKCS5_H
#define MBEDTLS_PKCS5_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "asn1.h"
#include "md.h"
@@ -46,6 +75,8 @@
extern "C" {
#endif
#if defined(MBEDTLS_ASN1_PARSE_C)
/**
* \brief PKCS#5 PBES2 function
*
@@ -64,6 +95,8 @@ int mbedtls_pkcs5_pbes2( const mbedtls_asn1_buf *pbe_params, int mode,
const unsigned char *data, size_t datalen,
unsigned char *output );
#endif /* MBEDTLS_ASN1_PARSE_C */
/**
* \brief PKCS#5 PBKDF2 using HMAC
*
@@ -83,6 +116,8 @@ int mbedtls_pkcs5_pbkdf2_hmac( mbedtls_md_context_t *ctx, const unsigned char *p
unsigned int iteration_count,
uint32_t key_length, unsigned char *output );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -90,6 +125,8 @@ int mbedtls_pkcs5_pbkdf2_hmac( mbedtls_md_context_t *ctx, const unsigned char *p
*/
int mbedtls_pkcs5_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

35
externals/mbedtls/include/mbedtls/platform.h vendored
View File

@@ -13,8 +13,31 @@
* dynamically configured at runtime.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -30,7 +53,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PLATFORM_H
#define MBEDTLS_PLATFORM_H
@@ -45,6 +68,9 @@
#include "platform_time.h"
#endif
#define MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED -0x0070 /**< Hardware accelerator failed */
#define MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED -0x0072 /**< The requested feature is not supported by the platform */
#ifdef __cplusplus
extern "C" {
#endif
@@ -317,7 +343,8 @@ int mbedtls_platform_set_nv_seed(
* \note This structure may be used to assist platform-specific
* setup or teardown operations.
*/
typedef struct {
typedef struct mbedtls_platform_context
{
char dummy; /**< A placeholder member, as empty structs are not portable. */
}
mbedtls_platform_context;

29
externals/mbedtls/include/mbedtls/platform_time.h vendored
View File

@@ -4,8 +4,31 @@
* \brief mbed TLS Platform time abstraction
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PLATFORM_TIME_H
#define MBEDTLS_PLATFORM_TIME_H

163
externals/mbedtls/include/mbedtls/platform_util.h vendored
View File

@@ -5,8 +5,31 @@
* library.
*/
/*
* Copyright (C) 2018, Arm Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,17 +45,120 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_PLATFORM_UTIL_H
#define MBEDTLS_PLATFORM_UTIL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#if defined(MBEDTLS_HAVE_TIME_DATE)
#include "platform_time.h"
#include <time.h>
#endif /* MBEDTLS_HAVE_TIME_DATE */
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_CHECK_PARAMS)
#if defined(MBEDTLS_CHECK_PARAMS_ASSERT)
/* Allow the user to define MBEDTLS_PARAM_FAILED to something like assert
* (which is what our config.h suggests). */
#include <assert.h>
#endif /* MBEDTLS_CHECK_PARAMS_ASSERT */
#if defined(MBEDTLS_PARAM_FAILED)
/** An alternative definition of MBEDTLS_PARAM_FAILED has been set in config.h.
*
* This flag can be used to check whether it is safe to assume that
* MBEDTLS_PARAM_FAILED() will expand to a call to mbedtls_param_failed().
*/
#define MBEDTLS_PARAM_FAILED_ALT
#elif defined(MBEDTLS_CHECK_PARAMS_ASSERT)
#define MBEDTLS_PARAM_FAILED( cond ) assert( cond )
#define MBEDTLS_PARAM_FAILED_ALT
#else /* MBEDTLS_PARAM_FAILED */
#define MBEDTLS_PARAM_FAILED( cond ) \
mbedtls_param_failed( #cond, __FILE__, __LINE__ )
/**
* \brief User supplied callback function for parameter validation failure.
* See #MBEDTLS_CHECK_PARAMS for context.
*
* This function will be called unless an alternative treatement
* is defined through the #MBEDTLS_PARAM_FAILED macro.
*
* This function can return, and the operation will be aborted, or
* alternatively, through use of setjmp()/longjmp() can resume
* execution in the application code.
*
* \param failure_condition The assertion that didn't hold.
* \param file The file where the assertion failed.
* \param line The line in the file where the assertion failed.
*/
void mbedtls_param_failed( const char *failure_condition,
const char *file,
int line );
#endif /* MBEDTLS_PARAM_FAILED */
/* Internal macro meant to be called only from within the library. */
#define MBEDTLS_INTERNAL_VALIDATE_RET( cond, ret ) \
do { \
if( !(cond) ) \
{ \
MBEDTLS_PARAM_FAILED( cond ); \
return( ret ); \
} \
} while( 0 )
/* Internal macro meant to be called only from within the library. */
#define MBEDTLS_INTERNAL_VALIDATE( cond ) \
do { \
if( !(cond) ) \
{ \
MBEDTLS_PARAM_FAILED( cond ); \
return; \
} \
} while( 0 )
#else /* MBEDTLS_CHECK_PARAMS */
/* Internal macros meant to be called only from within the library. */
#define MBEDTLS_INTERNAL_VALIDATE_RET( cond, ret ) do { } while( 0 )
#define MBEDTLS_INTERNAL_VALIDATE( cond ) do { } while( 0 )
#endif /* MBEDTLS_CHECK_PARAMS */
/* Internal helper macros for deprecating API constants. */
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#if defined(MBEDTLS_DEPRECATED_WARNING)
/* Deliberately don't (yet) export MBEDTLS_DEPRECATED here
* to avoid conflict with other headers which define and use
* it, too. We might want to move all these definitions here at
* some point for uniformity. */
#define MBEDTLS_DEPRECATED __attribute__((deprecated))
MBEDTLS_DEPRECATED typedef char const * mbedtls_deprecated_string_constant_t;
#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) \
( (mbedtls_deprecated_string_constant_t) ( VAL ) )
MBEDTLS_DEPRECATED typedef int mbedtls_deprecated_numeric_constant_t;
#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) \
( (mbedtls_deprecated_numeric_constant_t) ( VAL ) )
#undef MBEDTLS_DEPRECATED
#else /* MBEDTLS_DEPRECATED_WARNING */
#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) VAL
#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) VAL
#endif /* MBEDTLS_DEPRECATED_WARNING */
#endif /* MBEDTLS_DEPRECATED_REMOVED */
/**
* \brief Securely zeroize a buffer
*
@@ -57,6 +183,37 @@ extern "C" {
*/
void mbedtls_platform_zeroize( void *buf, size_t len );
#if defined(MBEDTLS_HAVE_TIME_DATE)
/**
* \brief Platform-specific implementation of gmtime_r()
*
* The function is a thread-safe abstraction that behaves
* similarly to the gmtime_r() function from Unix/POSIX.
*
* Mbed TLS will try to identify the underlying platform and
* make use of an appropriate underlying implementation (e.g.
* gmtime_r() for POSIX and gmtime_s() for Windows). If this is
* not possible, then gmtime() will be used. In this case, calls
* from the library to gmtime() will be guarded by the mutex
* mbedtls_threading_gmtime_mutex if MBEDTLS_THREADING_C is
* enabled. It is recommended that calls from outside the library
* are also guarded by this mutex.
*
* If MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, then Mbed TLS will
* unconditionally use the alternative implementation for
* mbedtls_platform_gmtime_r() supplied by the user at compile time.
*
* \param tt Pointer to an object containing time (in seconds) since the
* epoch to be converted
* \param tm_buf Pointer to an object where the results will be stored
*
* \return Pointer to an object of type struct tm on success, otherwise
* NULL
*/
struct tm *mbedtls_platform_gmtime_r( const mbedtls_time_t *tt,
struct tm *tm_buf );
#endif /* MBEDTLS_HAVE_TIME_DATE */
#ifdef __cplusplus
}
#endif

87
externals/mbedtls/include/mbedtls/poly1305.h vendored
View File

@@ -12,8 +12,32 @@
* \author Daniel King <damaki.gh@gmail.com>
*/
/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
* SPDX-License-Identifier: GPL-2.0
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,14 +53,14 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_POLY1305_H
#define MBEDTLS_POLY1305_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
@@ -45,7 +69,13 @@
#include <stddef.h>
#define MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA -0x0057 /**< Invalid input parameter(s). */
/* MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE is deprecated and should not be
* used. */
#define MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE -0x0059 /**< Feature not available. For example, s part of the API is not implemented. */
/* MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED -0x005B /**< Poly1305 hardware accelerator failed. */
#ifdef __cplusplus
@@ -54,7 +84,7 @@ extern "C" {
#if !defined(MBEDTLS_POLY1305_ALT)
typedef struct
typedef struct mbedtls_poly1305_context
{
uint32_t r[4]; /** The value for 'r' (low 128 bits of the key). */
uint32_t s[4]; /** The value for 's' (high 128 bits of the key). */
@@ -80,14 +110,18 @@ mbedtls_poly1305_context;
* \c mbedtls_poly1305_finish(), then finally
* \c mbedtls_poly1305_free().
*
* \param ctx The Poly1305 context to initialize.
* \param ctx The Poly1305 context to initialize. This must
* not be \c NULL.
*/
void mbedtls_poly1305_init( mbedtls_poly1305_context *ctx );
/**
* \brief This function releases and clears the specified Poly1305 context.
* \brief This function releases and clears the specified
* Poly1305 context.
*
* \param ctx The Poly1305 context to clear.
* \param ctx The Poly1305 context to clear. This may be \c NULL, in which
* case this function is a no-op. If it is not \c NULL, it must
* point to an initialized Poly1305 context.
*/
void mbedtls_poly1305_free( mbedtls_poly1305_context *ctx );
@@ -98,11 +132,11 @@ void mbedtls_poly1305_free( mbedtls_poly1305_context *ctx );
* invocation of Poly1305.
*
* \param ctx The Poly1305 context to which the key should be bound.
* \param key The buffer containing the 256-bit key.
* This must be initialized.
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if ctx or key are NULL.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_starts( mbedtls_poly1305_context *ctx,
const unsigned char key[32] );
@@ -116,13 +150,14 @@ int mbedtls_poly1305_starts( mbedtls_poly1305_context *ctx,
* It can be called repeatedly to process a stream of data.
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* \param ilen The length of the input data (in bytes). Any value is accepted.
* This must be initialized and bound to a key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be NULL if ilen == 0.
* This pointer can be \c NULL if `ilen == 0`.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if ctx or input are NULL.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_update( mbedtls_poly1305_context *ctx,
const unsigned char *input,
@@ -133,12 +168,12 @@ int mbedtls_poly1305_update( mbedtls_poly1305_context *ctx,
* Authentication Code (MAC).
*
* \param ctx The Poly1305 context to use for the Poly1305 operation.
* \param mac The buffer to where the MAC is written. Must be big enough
* to hold the 16-byte MAC.
* This must be initialized and bound to a key.
* \param mac The buffer to where the MAC is written. This must
* be a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if ctx or mac are NULL.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_finish( mbedtls_poly1305_context *ctx,
unsigned char mac[16] );
@@ -150,16 +185,16 @@ int mbedtls_poly1305_finish( mbedtls_poly1305_context *ctx,
* \warning The key must be unique and unpredictable for each
* invocation of Poly1305.
*
* \param key The buffer containing the 256-bit key.
* \param ilen The length of the input data (in bytes). Any value is accepted.
* \param key The buffer containing the \c 32 Byte (\c 256 Bit) key.
* \param ilen The length of the input data in Bytes.
* Any value is accepted.
* \param input The buffer holding the input data.
* This pointer can be NULL if ilen == 0.
* \param mac The buffer to where the MAC is written. Must be big enough
* to hold the 16-byte MAC.
* This pointer can be \c NULL if `ilen == 0`.
* \param mac The buffer to where the MAC is written. This must be
* a writable buffer of length \c 16 Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA
* if key, input, or mac are NULL.
* \return A negative error code on failure.
*/
int mbedtls_poly1305_mac( const unsigned char key[32],
const unsigned char *input,

37
externals/mbedtls/include/mbedtls/ripemd160.h vendored
View File

@@ -4,8 +4,31 @@
* \brief RIPE MD-160 message digest
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_RIPEMD160_H
#define MBEDTLS_RIPEMD160_H
@@ -35,6 +58,8 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED -0x0031 /**< RIPEMD160 hardware accelerator failed */
#ifdef __cplusplus
@@ -48,7 +73,7 @@ extern "C" {
/**
* \brief RIPEMD-160 context structure
*/
typedef struct
typedef struct mbedtls_ripemd160_context
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[5]; /*!< intermediate digest state */
@@ -219,6 +244,8 @@ MBEDTLS_DEPRECATED void mbedtls_ripemd160( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -226,6 +253,8 @@ MBEDTLS_DEPRECATED void mbedtls_ripemd160( const unsigned char *input,
*/
int mbedtls_ripemd160_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

620
externals/mbedtls/include/mbedtls/rsa.h vendored
View File

@@ -10,8 +10,31 @@
*
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,7 +50,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_RSA_H
#define MBEDTLS_RSA_H
@@ -57,7 +80,12 @@
#define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */
#define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */
#define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */
/* MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION is deprecated and should not be used.
*/
#define MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION -0x4500 /**< The implementation does not offer the requested operation, for example, because of security violations or lack of functionality. */
/* MBEDTLS_ERR_RSA_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_RSA_HW_ACCEL_FAILED -0x4580 /**< RSA hardware accelerator failed. */
/*
@@ -94,9 +122,12 @@ extern "C" {
* is deprecated. All manipulation should instead be done through
* the public interface functions.
*/
typedef struct
typedef struct mbedtls_rsa_context
{
int ver; /*!< Always 0.*/
int ver; /*!< Reserved for internal purposes.
* Do not set this field in application
* code. Its meaning might change without
* notice. */
size_t len; /*!< The size of \p N in Bytes. */
mbedtls_mpi N; /*!< The public modulus. */
@@ -126,6 +157,7 @@ typedef struct
mask generating function used in the
EME-OAEP and EMSA-PSS encodings. */
#if defined(MBEDTLS_THREADING_C)
/* Invariant: the mutex is initialized iff ver != 0. */
mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex. */
#endif
}
@@ -147,23 +179,24 @@ mbedtls_rsa_context;
* \note The choice of padding mode is strictly enforced for private key
* operations, since there might be security concerns in
* mixing padding modes. For public key operations it is
* a default value, which can be overriden by calling specific
* a default value, which can be overridden by calling specific
* \c rsa_rsaes_xxx or \c rsa_rsassa_xxx functions.
*
* \note The hash selected in \p hash_id is always used for OEAP
* encryption. For PSS signatures, it is always used for
* making signatures, but can be overriden for verifying them.
* If set to #MBEDTLS_MD_NONE, it is always overriden.
* making signatures, but can be overridden for verifying them.
* If set to #MBEDTLS_MD_NONE, it is always overridden.
*
* \param ctx The RSA context to initialize.
* \param padding Selects padding mode: #MBEDTLS_RSA_PKCS_V15 or
* #MBEDTLS_RSA_PKCS_V21.
* \param hash_id The hash identifier of #mbedtls_md_type_t type, if
* \p padding is #MBEDTLS_RSA_PKCS_V21.
* \param ctx The RSA context to initialize. This must not be \c NULL.
* \param padding The padding mode to use. This must be either
* #MBEDTLS_RSA_PKCS_V15 or #MBEDTLS_RSA_PKCS_V21.
* \param hash_id The hash identifier of ::mbedtls_md_type_t type, if
* \p padding is #MBEDTLS_RSA_PKCS_V21. It is unused
* otherwise.
*/
void mbedtls_rsa_init( mbedtls_rsa_context *ctx,
int padding,
int hash_id);
int hash_id );
/**
* \brief This function imports a set of core parameters into an
@@ -185,11 +218,11 @@ void mbedtls_rsa_init( mbedtls_rsa_context *ctx,
* for the lifetime of the RSA context being set up.
*
* \param ctx The initialized RSA context to store the parameters in.
* \param N The RSA modulus, or NULL.
* \param P The first prime factor of \p N, or NULL.
* \param Q The second prime factor of \p N, or NULL.
* \param D The private exponent, or NULL.
* \param E The public exponent, or NULL.
* \param N The RSA modulus. This may be \c NULL.
* \param P The first prime factor of \p N. This may be \c NULL.
* \param Q The second prime factor of \p N. This may be \c NULL.
* \param D The private exponent. This may be \c NULL.
* \param E The public exponent. This may be \c NULL.
*
* \return \c 0 on success.
* \return A non-zero error code on failure.
@@ -219,16 +252,16 @@ int mbedtls_rsa_import( mbedtls_rsa_context *ctx,
* for the lifetime of the RSA context being set up.
*
* \param ctx The initialized RSA context to store the parameters in.
* \param N The RSA modulus, or NULL.
* \param N_len The Byte length of \p N, ignored if \p N == NULL.
* \param P The first prime factor of \p N, or NULL.
* \param P_len The Byte length of \p P, ignored if \p P == NULL.
* \param Q The second prime factor of \p N, or NULL.
* \param Q_len The Byte length of \p Q, ignored if \p Q == NULL.
* \param D The private exponent, or NULL.
* \param D_len The Byte length of \p D, ignored if \p D == NULL.
* \param E The public exponent, or NULL.
* \param E_len The Byte length of \p E, ignored if \p E == NULL.
* \param N The RSA modulus. This may be \c NULL.
* \param N_len The Byte length of \p N; it is ignored if \p N == NULL.
* \param P The first prime factor of \p N. This may be \c NULL.
* \param P_len The Byte length of \p P; it ns ignored if \p P == NULL.
* \param Q The second prime factor of \p N. This may be \c NULL.
* \param Q_len The Byte length of \p Q; it is ignored if \p Q == NULL.
* \param D The private exponent. This may be \c NULL.
* \param D_len The Byte length of \p D; it is ignored if \p D == NULL.
* \param E The public exponent. This may be \c NULL.
* \param E_len The Byte length of \p E; it is ignored if \p E == NULL.
*
* \return \c 0 on success.
* \return A non-zero error code on failure.
@@ -283,7 +316,7 @@ int mbedtls_rsa_complete( mbedtls_rsa_context *ctx );
* zero Bytes.
*
* Possible reasons for returning
* #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION:<ul>
* #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED:<ul>
* <li>An alternative RSA implementation is in use, which
* stores the key externally, and either cannot or should
* not export it into RAM.</li>
@@ -296,14 +329,19 @@ int mbedtls_rsa_complete( mbedtls_rsa_context *ctx );
* the RSA context stays intact and remains usable.
*
* \param ctx The initialized RSA context.
* \param N The MPI to hold the RSA modulus, or NULL.
* \param P The MPI to hold the first prime factor of \p N, or NULL.
* \param Q The MPI to hold the second prime factor of \p N, or NULL.
* \param D The MPI to hold the private exponent, or NULL.
* \param E The MPI to hold the public exponent, or NULL.
* \param N The MPI to hold the RSA modulus.
* This may be \c NULL if this field need not be exported.
* \param P The MPI to hold the first prime factor of \p N.
* This may be \c NULL if this field need not be exported.
* \param Q The MPI to hold the second prime factor of \p N.
* This may be \c NULL if this field need not be exported.
* \param D The MPI to hold the private exponent.
* This may be \c NULL if this field need not be exported.
* \param E The MPI to hold the public exponent.
* This may be \c NULL if this field need not be exported.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION if exporting the
* \return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED if exporting the
* requested parameters cannot be done due to missing
* functionality or because of security policies.
* \return A non-zero return code on any other failure.
@@ -323,7 +361,7 @@ int mbedtls_rsa_export( const mbedtls_rsa_context *ctx,
* zero Bytes.
*
* Possible reasons for returning
* #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION:<ul>
* #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED:<ul>
* <li>An alternative RSA implementation is in use, which
* stores the key externally, and either cannot or should
* not export it into RAM.</li>
@@ -338,21 +376,24 @@ int mbedtls_rsa_export( const mbedtls_rsa_context *ctx,
* buffer pointers are NULL.
*
* \param ctx The initialized RSA context.
* \param N The Byte array to store the RSA modulus, or NULL.
* \param N The Byte array to store the RSA modulus,
* or \c NULL if this field need not be exported.
* \param N_len The size of the buffer for the modulus.
* \param P The Byte array to hold the first prime factor of \p N, or
* NULL.
* \param P The Byte array to hold the first prime factor of \p N,
* or \c NULL if this field need not be exported.
* \param P_len The size of the buffer for the first prime factor.
* \param Q The Byte array to hold the second prime factor of \p N, or
* NULL.
* \param Q The Byte array to hold the second prime factor of \p N,
* or \c NULL if this field need not be exported.
* \param Q_len The size of the buffer for the second prime factor.
* \param D The Byte array to hold the private exponent, or NULL.
* \param D The Byte array to hold the private exponent,
* or \c NULL if this field need not be exported.
* \param D_len The size of the buffer for the private exponent.
* \param E The Byte array to hold the public exponent, or NULL.
* \param E The Byte array to hold the public exponent,
* or \c NULL if this field need not be exported.
* \param E_len The size of the buffer for the public exponent.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION if exporting the
* \return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED if exporting the
* requested parameters cannot be done due to missing
* functionality or because of security policies.
* \return A non-zero return code on any other failure.
@@ -372,9 +413,12 @@ int mbedtls_rsa_export_raw( const mbedtls_rsa_context *ctx,
* mbedtls_rsa_deduce_opt().
*
* \param ctx The initialized RSA context.
* \param DP The MPI to hold D modulo P-1, or NULL.
* \param DQ The MPI to hold D modulo Q-1, or NULL.
* \param QP The MPI to hold modular inverse of Q modulo P, or NULL.
* \param DP The MPI to hold \c D modulo `P-1`,
* or \c NULL if it need not be exported.
* \param DQ The MPI to hold \c D modulo `Q-1`,
* or \c NULL if it need not be exported.
* \param QP The MPI to hold modular inverse of \c Q modulo \c P,
* or \c NULL if it need not be exported.
*
* \return \c 0 on success.
* \return A non-zero error code on failure.
@@ -387,13 +431,13 @@ int mbedtls_rsa_export_crt( const mbedtls_rsa_context *ctx,
* \brief This function sets padding for an already initialized RSA
* context. See mbedtls_rsa_init() for details.
*
* \param ctx The RSA context to be set.
* \param padding Selects padding mode: #MBEDTLS_RSA_PKCS_V15 or
* #MBEDTLS_RSA_PKCS_V21.
* \param ctx The initialized RSA context to be configured.
* \param padding The padding mode to use. This must be either
* #MBEDTLS_RSA_PKCS_V15 or #MBEDTLS_RSA_PKCS_V21.
* \param hash_id The #MBEDTLS_RSA_PKCS_V21 hash identifier.
*/
void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding,
int hash_id);
int hash_id );
/**
* \brief This function retrieves the length of RSA modulus in Bytes.
@@ -411,11 +455,14 @@ size_t mbedtls_rsa_get_len( const mbedtls_rsa_context *ctx );
* \note mbedtls_rsa_init() must be called before this function,
* to set up the RSA context.
*
* \param ctx The RSA context used to hold the key.
* \param f_rng The RNG function.
* \param p_rng The RNG context.
* \param ctx The initialized RSA context used to hold the key.
* \param f_rng The RNG function to be used for key generation.
* This must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng.
* This may be \c NULL if \p f_rng doesn't need a context.
* \param nbits The size of the public key in bits.
* \param exponent The public exponent. For example, 65537.
* \param exponent The public exponent to use. For example, \c 65537.
* This must be odd and greater than \c 1.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -433,7 +480,7 @@ int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx,
* enough information is present to perform an RSA public key
* operation using mbedtls_rsa_public().
*
* \param ctx The RSA context to check.
* \param ctx The initialized RSA context to check.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -472,7 +519,7 @@ int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx );
* parameters, which goes beyond what is effectively checkable
* by the library.</li></ul>
*
* \param ctx The RSA context to check.
* \param ctx The initialized RSA context to check.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -484,8 +531,8 @@ int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx );
*
* It checks each of the contexts, and makes sure they match.
*
* \param pub The RSA context holding the public key.
* \param prv The RSA context holding the private key.
* \param pub The initialized RSA context holding the public key.
* \param prv The initialized RSA context holding the private key.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -496,18 +543,19 @@ int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub,
/**
* \brief This function performs an RSA public key operation.
*
* \param ctx The initialized RSA context to use.
* \param input The input buffer. This must be a readable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
* \param output The output buffer. This must be a writable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \note This function does not handle message padding.
*
* \note Make sure to set \p input[0] = 0 or ensure that
* input is smaller than \p N.
*
* \note The input and output buffers must be large
* enough. For example, 128 Bytes if RSA-1024 is used.
*
* \param ctx The RSA context.
* \param input The input buffer.
* \param output The output buffer.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
*/
@@ -518,9 +566,6 @@ int mbedtls_rsa_public( mbedtls_rsa_context *ctx,
/**
* \brief This function performs an RSA private key operation.
*
* \note The input and output buffers must be large
* enough. For example, 128 Bytes if RSA-1024 is used.
*
* \note Blinding is used if and only if a PRNG is provided.
*
* \note If blinding is used, both the base of exponentation
@@ -532,11 +577,18 @@ int mbedtls_rsa_public( mbedtls_rsa_context *ctx,
* Future versions of the library may enforce the presence
* of a PRNG.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for blinding.
* \param p_rng The RNG context.
* \param input The input buffer.
* \param output The output buffer.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function, used for blinding. It is discouraged
* and deprecated to pass \c NULL here, in which case
* blinding will be omitted.
* \param p_rng The RNG context to pass to \p f_rng. This may be \c NULL
* if \p f_rng is \c NULL or if \p f_rng doesn't need a context.
* \param input The input buffer. This must be a readable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
* \param output The output buffer. This must be a writable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -555,9 +607,6 @@ int mbedtls_rsa_private( mbedtls_rsa_context *ctx,
* It is the generic wrapper for performing a PKCS#1 encryption
* operation using the \p mode from the context.
*
* \note The input and output buffers must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -565,16 +614,26 @@ int mbedtls_rsa_private( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for padding, PKCS#1 v2.1
* encoding, and #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ilen The length of the plaintext.
* \param input The buffer holding the data to encrypt.
* \param output The buffer used to hold the ciphertext.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG to use. It is mandatory for PKCS#1 v2.1 padding
* encoding, and for PKCS#1 v1.5 padding encoding when used
* with \p mode set to #MBEDTLS_RSA_PUBLIC. For PKCS#1 v1.5
* padding encoding and \p mode set to #MBEDTLS_RSA_PRIVATE,
* it is used for blinding and should be provided in this
* case; see mbedtls_rsa_private() for more.
* \param p_rng The RNG context to be passed to \p f_rng. May be
* \c NULL if \p f_rng is \c NULL or if \p f_rng doesn't
* need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param ilen The length of the plaintext in Bytes.
* \param input The input data to encrypt. This must be a readable
* buffer of size \p ilen Bytes. This must not be \c NULL.
* \param output The output buffer. This must be a writable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -590,9 +649,6 @@ int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx,
* \brief This function performs a PKCS#1 v1.5 encryption operation
* (RSAES-PKCS1-v1_5-ENCRYPT).
*
* \note The output buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -600,16 +656,24 @@ int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for padding and
* #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ilen The length of the plaintext.
* \param input The buffer holding the data to encrypt.
* \param output The buffer used to hold the ciphertext.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function to use. It is needed for padding generation
* if \p mode is #MBEDTLS_RSA_PUBLIC. If \p mode is
* #MBEDTLS_RSA_PRIVATE (discouraged), it is used for
* blinding and should be provided; see mbedtls_rsa_private().
* \param p_rng The RNG context to be passed to \p f_rng. This may
* be \c NULL if \p f_rng is \c NULL or if \p f_rng
* doesn't need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param ilen The length of the plaintext in Bytes.
* \param input The input data to encrypt. This must be a readable
* buffer of size \p ilen Bytes. This must not be \c NULL.
* \param output The output buffer. This must be a writable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -635,18 +699,25 @@ int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for padding and PKCS#1 v2.1
* encoding and #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initnialized RSA context to use.
* \param f_rng The RNG function to use. This is needed for padding
* generation and must be provided.
* \param p_rng The RNG context to be passed to \p f_rng. This may
* be \c NULL if \p f_rng doesn't need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param label The buffer holding the custom label to use.
* \param label_len The length of the label.
* \param ilen The length of the plaintext.
* \param input The buffer holding the data to encrypt.
* \param output The buffer used to hold the ciphertext.
* This must be a readable buffer of length \p label_len
* Bytes. It may be \c NULL if \p label_len is \c 0.
* \param label_len The length of the label in Bytes.
* \param ilen The length of the plaintext buffer \p input in Bytes.
* \param input The input data to encrypt. This must be a readable
* buffer of size \p ilen Bytes. This must not be \c NULL.
* \param output The output buffer. This must be a writable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -674,9 +745,6 @@ int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx,
* hold the decryption of the particular ciphertext provided,
* the function returns \c MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE.
*
* \note The input buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -684,16 +752,25 @@ int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param olen The length of the plaintext.
* \param input The buffer holding the encrypted data.
* \param output The buffer used to hold the plaintext.
* \param output_max_len The maximum length of the output buffer.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. If \p mode is
* #MBEDTLS_RSA_PUBLIC, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param olen The address at which to store the length of
* the plaintext. This must not be \c NULL.
* \param input The ciphertext buffer. This must be a readable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
* \param output The buffer used to hold the plaintext. This must
* be a writable buffer of length \p output_max_len Bytes.
* \param output_max_len The length in Bytes of the output buffer \p output.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -717,9 +794,6 @@ int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx,
* hold the decryption of the particular ciphertext provided,
* the function returns #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE.
*
* \note The input buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -727,16 +801,25 @@ int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param olen The length of the plaintext.
* \param input The buffer holding the encrypted data.
* \param output The buffer to hold the plaintext.
* \param output_max_len The maximum length of the output buffer.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. If \p mode is
* #MBEDTLS_RSA_PUBLIC, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param olen The address at which to store the length of
* the plaintext. This must not be \c NULL.
* \param input The ciphertext buffer. This must be a readable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
* \param output The buffer used to hold the plaintext. This must
* be a writable buffer of length \p output_max_len Bytes.
* \param output_max_len The length in Bytes of the output buffer \p output.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -762,9 +845,6 @@ int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx,
* ciphertext provided, the function returns
* #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE.
*
* \note The input buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -772,18 +852,29 @@ int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. If \p mode is
* #MBEDTLS_RSA_PUBLIC, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param label The buffer holding the custom label to use.
* \param label_len The length of the label.
* \param olen The length of the plaintext.
* \param input The buffer holding the encrypted data.
* \param output The buffer to hold the plaintext.
* \param output_max_len The maximum length of the output buffer.
* This must be a readable buffer of length \p label_len
* Bytes. It may be \c NULL if \p label_len is \c 0.
* \param label_len The length of the label in Bytes.
* \param olen The address at which to store the length of
* the plaintext. This must not be \c NULL.
* \param input The ciphertext buffer. This must be a readable buffer
* of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
* \param output The buffer used to hold the plaintext. This must
* be a writable buffer of length \p output_max_len Bytes.
* \param output_max_len The length in Bytes of the output buffer \p output.
*
* \return \c 0 on success.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -819,18 +910,31 @@ int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for PKCS#1 v2.1 encoding and for
* #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function to use. If the padding mode is PKCS#1 v2.1,
* this must be provided. If the padding mode is PKCS#1 v1.5 and
* \p mode is #MBEDTLS_RSA_PRIVATE, it is used for blinding
* and should be provided; see mbedtls_rsa_private() for more
* more. It is ignored otherwise.
* \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL
* if \p f_rng is \c NULL or doesn't need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer to hold the ciphertext.
* \param hashlen The length of the message digest.
* Ths is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer to hold the signature. This must be a writable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus. A buffer length of
* #MBEDTLS_MPI_MAX_SIZE is always safe.
*
* \return \c 0 if the signing operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -848,9 +952,6 @@ int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx,
* \brief This function performs a PKCS#1 v1.5 signature
* operation (RSASSA-PKCS1-v1_5-SIGN).
*
* \note The \p sig buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -858,17 +959,30 @@ int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. If \p mode is
* #MBEDTLS_RSA_PUBLIC, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL
* if \p f_rng is \c NULL or doesn't need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer to hold the ciphertext.
* \param hashlen The length of the message digest.
* Ths is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer to hold the signature. This must be a writable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus. A buffer length of
* #MBEDTLS_MPI_MAX_SIZE is always safe.
*
* \return \c 0 if the signing operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -886,9 +1000,6 @@ int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx,
* \brief This function performs a PKCS#1 v2.1 PSS signature
* operation (RSASSA-PSS-SIGN).
*
* \note The \p sig buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \note The \p hash_id in the RSA context is the one used for the
* encoding. \p md_alg in the function call is the type of hash
* that is encoded. According to <em>RFC-3447: Public-Key
@@ -896,6 +1007,16 @@ int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx,
* Specifications</em> it is advised to keep both hashes the
* same.
*
* \note This function always uses the maximum possible salt size,
* up to the length of the payload hash. This choice of salt
* size complies with FIPS 186-4 §5.5 (e) and RFC 8017 (PKCS#1
* v2.2) §9.1.1 step 3. Furthermore this function enforces a
* minimum salt size which is the hash size minus 2 bytes. If
* this minimum size is too large given the key size (the salt
* size, plus the hash size, plus 2 bytes must be no more than
* the key size in bytes), this function returns
* #MBEDTLS_ERR_RSA_BAD_INPUT_DATA.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -903,18 +1024,27 @@ int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PUBLIC and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA context.
* \param f_rng The RNG function. Needed for PKCS#1 v2.1 encoding and for
* #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA context to use.
* \param f_rng The RNG function. It must not be \c NULL.
* \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL
* if \p f_rng doesn't need a context argument.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer to hold the ciphertext.
* \param hashlen The length of the message digest.
* Ths is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer to hold the signature. This must be a writable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus. A buffer length of
* #MBEDTLS_MPI_MAX_SIZE is always safe.
*
* \return \c 0 if the signing operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -935,9 +1065,6 @@ int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx,
* This is the generic wrapper for performing a PKCS#1
* verification using the mode from the context.
*
* \note The \p sig buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \note For PKCS#1 v2.1 encoding, see comments on
* mbedtls_rsa_rsassa_pss_verify() about \p md_alg and
* \p hash_id.
@@ -949,17 +1076,28 @@ int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA public key context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA public key context to use.
* \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. Otherwise, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer holding the ciphertext.
* \param hashlen The length of the message digest.
* This is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer holding the signature. This must be a readable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 if the verify operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -977,9 +1115,6 @@ int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx,
* \brief This function performs a PKCS#1 v1.5 verification
* operation (RSASSA-PKCS1-v1_5-VERIFY).
*
* \note The \p sig buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \deprecated It is deprecated and discouraged to call this function
* in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library
* are likely to remove the \p mode argument and have it
@@ -987,17 +1122,28 @@ int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA public key context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA public key context to use.
* \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. Otherwise, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer holding the ciphertext.
* \param hashlen The length of the message digest.
* This is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer holding the signature. This must be a readable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 if the verify operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -1018,9 +1164,6 @@ int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx,
* The hash function for the MGF mask generating function
* is that specified in the RSA context.
*
* \note The \p sig buffer must be as large as the size
* of \p ctx->N. For example, 128 Bytes if RSA-1024 is used.
*
* \note The \p hash_id in the RSA context is the one used for the
* verification. \p md_alg in the function call is the type of
* hash that is verified. According to <em>RFC-3447: Public-Key
@@ -1036,17 +1179,28 @@ int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx,
*
* \note Alternative implementations of RSA need not support
* mode being set to #MBEDTLS_RSA_PRIVATE and might instead
* return #MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION.
* return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED.
*
* \param ctx The RSA public key context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA public key context to use.
* \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. Otherwise, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated).
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param sig The buffer holding the ciphertext.
* \param hashlen The length of the message digest.
* This is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param sig The buffer holding the signature. This must be a readable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 if the verify operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -1072,19 +1226,29 @@ int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx,
*
* \note The \p hash_id in the RSA context is ignored.
*
* \param ctx The RSA public key context.
* \param f_rng The RNG function. Only needed for #MBEDTLS_RSA_PRIVATE.
* \param p_rng The RNG context.
* \param mode #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param ctx The initialized RSA public key context to use.
* \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE,
* this is used for blinding and should be provided; see
* mbedtls_rsa_private() for more. Otherwise, it is ignored.
* \param p_rng The RNG context to be passed to \p f_rng. This may be
* \c NULL if \p f_rng is \c NULL or doesn't need a context.
* \param mode The mode of operation. This must be either
* #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE.
* \param md_alg The message-digest algorithm used to hash the original data.
* Use #MBEDTLS_MD_NONE for signing raw data.
* \param hashlen The length of the message digest. Only used if \p md_alg is
* #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest.
* \param mgf1_hash_id The message digest used for mask generation.
* \param expected_salt_len The length of the salt used in padding. Use
* #MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length.
* \param sig The buffer holding the ciphertext.
* \param hashlen The length of the message digest.
* This is only used if \p md_alg is #MBEDTLS_MD_NONE.
* \param hash The buffer holding the message digest or raw data.
* If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable
* buffer of length \p hashlen Bytes. If \p md_alg is not
* #MBEDTLS_MD_NONE, it must be a readable buffer of length
* the size of the hash corresponding to \p md_alg.
* \param mgf1_hash_id The message digest used for mask generation.
* \param expected_salt_len The length of the salt used in padding. Use
* #MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length.
* \param sig The buffer holding the signature. This must be a readable
* buffer of length \c ctx->len Bytes. For example, \c 256 Bytes
* for an 2048-bit RSA modulus.
*
* \return \c 0 if the verify operation was successful.
* \return An \c MBEDTLS_ERR_RSA_XXX error code on failure.
@@ -1103,8 +1267,8 @@ int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx,
/**
* \brief This function copies the components of an RSA context.
*
* \param dst The destination context.
* \param src The source context.
* \param dst The destination context. This must be initialized.
* \param src The source context. This must be initialized.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure.
@@ -1114,10 +1278,14 @@ int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src )
/**
* \brief This function frees the components of an RSA key.
*
* \param ctx The RSA Context to free.
* \param ctx The RSA context to free. May be \c NULL, in which case
* this function is a no-op. If it is not \c NULL, it must
* point to an initialized RSA context.
*/
void mbedtls_rsa_free( mbedtls_rsa_context *ctx );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The RSA checkup routine.
*
@@ -1126,6 +1294,8 @@ void mbedtls_rsa_free( mbedtls_rsa_context *ctx );
*/
int mbedtls_rsa_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

29
externals/mbedtls/include/mbedtls/rsa_internal.h vendored
View File

@@ -35,8 +35,31 @@
*
*/
/*
* Copyright (C) 2006-2017, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -52,7 +75,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*
*/

97
externals/mbedtls/include/mbedtls/sha1.h vendored
View File

@@ -11,8 +11,31 @@
* digests instead.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,7 +51,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SHA1_H
#define MBEDTLS_SHA1_H
@@ -42,7 +65,9 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED -0x0035 /**< SHA-1 hardware accelerator failed */
#define MBEDTLS_ERR_SHA1_BAD_INPUT_DATA -0x0073 /**< SHA-1 input data was malformed. */
#ifdef __cplusplus
extern "C" {
@@ -60,7 +85,7 @@ extern "C" {
* stronger message digests instead.
*
*/
typedef struct
typedef struct mbedtls_sha1_context
{
uint32_t total[2]; /*!< The number of Bytes processed. */
uint32_t state[5]; /*!< The intermediate digest state. */
@@ -80,6 +105,7 @@ mbedtls_sha1_context;
* stronger message digests instead.
*
* \param ctx The SHA-1 context to initialize.
* This must not be \c NULL.
*
*/
void mbedtls_sha1_init( mbedtls_sha1_context *ctx );
@@ -91,7 +117,10 @@ void mbedtls_sha1_init( mbedtls_sha1_context *ctx );
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param ctx The SHA-1 context to clear.
* \param ctx The SHA-1 context to clear. This may be \c NULL,
* in which case this function does nothing. If it is
* not \c NULL, it must point to an initialized
* SHA-1 context.
*
*/
void mbedtls_sha1_free( mbedtls_sha1_context *ctx );
@@ -103,8 +132,8 @@ void mbedtls_sha1_free( mbedtls_sha1_context *ctx );
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param dst The SHA-1 context to clone to.
* \param src The SHA-1 context to clone from.
* \param dst The SHA-1 context to clone to. This must be initialized.
* \param src The SHA-1 context to clone from. This must be initialized.
*
*/
void mbedtls_sha1_clone( mbedtls_sha1_context *dst,
@@ -117,9 +146,10 @@ void mbedtls_sha1_clone( mbedtls_sha1_context *dst,
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param ctx The SHA-1 context to initialize.
* \param ctx The SHA-1 context to initialize. This must be initialized.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*
*/
int mbedtls_sha1_starts_ret( mbedtls_sha1_context *ctx );
@@ -132,11 +162,14 @@ int mbedtls_sha1_starts_ret( mbedtls_sha1_context *ctx );
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param ctx The SHA-1 context.
* \param ctx The SHA-1 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* This must be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data \p input in Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha1_update_ret( mbedtls_sha1_context *ctx,
const unsigned char *input,
@@ -150,10 +183,13 @@ int mbedtls_sha1_update_ret( mbedtls_sha1_context *ctx,
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param ctx The SHA-1 context.
* \param output The SHA-1 checksum result.
* \param ctx The SHA-1 context to use. This must be initialized and
* have a hash operation started.
* \param output The SHA-1 checksum result. This must be a writable
* buffer of length \c 20 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha1_finish_ret( mbedtls_sha1_context *ctx,
unsigned char output[20] );
@@ -165,10 +201,12 @@ int mbedtls_sha1_finish_ret( mbedtls_sha1_context *ctx,
* constitutes a security risk. We recommend considering
* stronger message digests instead.
*
* \param ctx The SHA-1 context.
* \param data The data block being processed.
* \param ctx The SHA-1 context to use. This must be initialized.
* \param data The data block being processed. This must be a
* readable buffer of length \c 64 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*
*/
int mbedtls_internal_sha1_process( mbedtls_sha1_context *ctx,
@@ -189,7 +227,7 @@ int mbedtls_internal_sha1_process( mbedtls_sha1_context *ctx,
*
* \deprecated Superseded by mbedtls_sha1_starts_ret() in 2.7.0.
*
* \param ctx The SHA-1 context to initialize.
* \param ctx The SHA-1 context to initialize. This must be initialized.
*
*/
MBEDTLS_DEPRECATED void mbedtls_sha1_starts( mbedtls_sha1_context *ctx );
@@ -204,9 +242,11 @@ MBEDTLS_DEPRECATED void mbedtls_sha1_starts( mbedtls_sha1_context *ctx );
*
* \deprecated Superseded by mbedtls_sha1_update_ret() in 2.7.0.
*
* \param ctx The SHA-1 context.
* \param ctx The SHA-1 context. This must be initialized and
* have a hash operation started.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* This must be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data \p input in Bytes.
*
*/
MBEDTLS_DEPRECATED void mbedtls_sha1_update( mbedtls_sha1_context *ctx,
@@ -223,9 +263,10 @@ MBEDTLS_DEPRECATED void mbedtls_sha1_update( mbedtls_sha1_context *ctx,
*
* \deprecated Superseded by mbedtls_sha1_finish_ret() in 2.7.0.
*
* \param ctx The SHA-1 context.
* \param ctx The SHA-1 context. This must be initialized and
* have a hash operation started.
* \param output The SHA-1 checksum result.
*
* This must be a writable buffer of length \c 20 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha1_finish( mbedtls_sha1_context *ctx,
unsigned char output[20] );
@@ -239,8 +280,9 @@ MBEDTLS_DEPRECATED void mbedtls_sha1_finish( mbedtls_sha1_context *ctx,
*
* \deprecated Superseded by mbedtls_internal_sha1_process() in 2.7.0.
*
* \param ctx The SHA-1 context.
* \param ctx The SHA-1 context. This must be initialized.
* \param data The data block being processed.
* This must be a readable buffer of length \c 64 bytes.
*
*/
MBEDTLS_DEPRECATED void mbedtls_sha1_process( mbedtls_sha1_context *ctx,
@@ -263,10 +305,13 @@ MBEDTLS_DEPRECATED void mbedtls_sha1_process( mbedtls_sha1_context *ctx,
* stronger message digests instead.
*
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* This must be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data \p input in Bytes.
* \param output The SHA-1 checksum result.
* This must be a writable buffer of length \c 20 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*
*/
int mbedtls_sha1_ret( const unsigned char *input,
@@ -295,8 +340,10 @@ int mbedtls_sha1_ret( const unsigned char *input,
* \deprecated Superseded by mbedtls_sha1_ret() in 2.7.0
*
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param output The SHA-1 checksum result.
* This must be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data \p input in Bytes.
* \param output The SHA-1 checksum result. This must be a writable
* buffer of size \c 20 Bytes.
*
*/
MBEDTLS_DEPRECATED void mbedtls_sha1( const unsigned char *input,
@@ -306,6 +353,8 @@ MBEDTLS_DEPRECATED void mbedtls_sha1( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The SHA-1 checkup routine.
*
@@ -319,6 +368,8 @@ MBEDTLS_DEPRECATED void mbedtls_sha1( const unsigned char *input,
*/
int mbedtls_sha1_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

124
externals/mbedtls/include/mbedtls/sha256.h vendored
View File

@@ -7,8 +7,31 @@
* hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,7 +47,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SHA256_H
#define MBEDTLS_SHA256_H
@@ -38,7 +61,9 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED -0x0037 /**< SHA-256 hardware accelerator failed */
#define MBEDTLS_ERR_SHA256_BAD_INPUT_DATA -0x0074 /**< SHA-256 input data was malformed. */
#ifdef __cplusplus
extern "C" {
@@ -55,7 +80,7 @@ extern "C" {
* checksum calculations. The choice between these two is
* made in the call to mbedtls_sha256_starts_ret().
*/
typedef struct
typedef struct mbedtls_sha256_context
{
uint32_t total[2]; /*!< The number of Bytes processed. */
uint32_t state[8]; /*!< The intermediate digest state. */
@@ -72,22 +97,24 @@ mbedtls_sha256_context;
/**
* \brief This function initializes a SHA-256 context.
*
* \param ctx The SHA-256 context to initialize.
* \param ctx The SHA-256 context to initialize. This must not be \c NULL.
*/
void mbedtls_sha256_init( mbedtls_sha256_context *ctx );
/**
* \brief This function clears a SHA-256 context.
*
* \param ctx The SHA-256 context to clear.
* \param ctx The SHA-256 context to clear. This may be \c NULL, in which
* case this function returns immediately. If it is not \c NULL,
* it must point to an initialized SHA-256 context.
*/
void mbedtls_sha256_free( mbedtls_sha256_context *ctx );
/**
* \brief This function clones the state of a SHA-256 context.
*
* \param dst The destination context.
* \param src The context to clone.
* \param dst The destination context. This must be initialized.
* \param src The context to clone. This must be initialized.
*/
void mbedtls_sha256_clone( mbedtls_sha256_context *dst,
const mbedtls_sha256_context *src );
@@ -96,11 +123,12 @@ void mbedtls_sha256_clone( mbedtls_sha256_context *dst,
* \brief This function starts a SHA-224 or SHA-256 checksum
* calculation.
*
* \param ctx The context to initialize.
* \param is224 Determines which function to use:
* 0: Use SHA-256, or 1: Use SHA-224.
* \param ctx The context to use. This must be initialized.
* \param is224 This determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_starts_ret( mbedtls_sha256_context *ctx, int is224 );
@@ -108,11 +136,14 @@ int mbedtls_sha256_starts_ret( mbedtls_sha256_context *ctx, int is224 );
* \brief This function feeds an input buffer into an ongoing
* SHA-256 checksum calculation.
*
* \param ctx The SHA-256 context.
* \param input The buffer holding the data.
* \param ilen The length of the input data.
* \param ctx The SHA-256 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_update_ret( mbedtls_sha256_context *ctx,
const unsigned char *input,
@@ -122,10 +153,13 @@ int mbedtls_sha256_update_ret( mbedtls_sha256_context *ctx,
* \brief This function finishes the SHA-256 operation, and writes
* the result to the output buffer.
*
* \param ctx The SHA-256 context.
* \param ctx The SHA-256 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-224 or SHA-256 checksum result.
* This must be a writable buffer of length \c 32 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha256_finish_ret( mbedtls_sha256_context *ctx,
unsigned char output[32] );
@@ -135,10 +169,12 @@ int mbedtls_sha256_finish_ret( mbedtls_sha256_context *ctx,
* the ongoing SHA-256 computation. This function is for
* internal use only.
*
* \param ctx The SHA-256 context.
* \param data The buffer holding one block of data.
* \param ctx The SHA-256 context. This must be initialized.
* \param data The buffer holding one block of data. This must
* be a readable buffer of length \c 64 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_internal_sha256_process( mbedtls_sha256_context *ctx,
const unsigned char data[64] );
@@ -153,12 +189,11 @@ int mbedtls_internal_sha256_process( mbedtls_sha256_context *ctx,
* \brief This function starts a SHA-224 or SHA-256 checksum
* calculation.
*
*
* \deprecated Superseded by mbedtls_sha256_starts_ret() in 2.7.0.
*
* \param ctx The context to initialize.
* \param is224 Determines which function to use:
* 0: Use SHA-256, or 1: Use SHA-224.
* \param ctx The context to use. This must be initialized.
* \param is224 Determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_starts( mbedtls_sha256_context *ctx,
int is224 );
@@ -169,9 +204,11 @@ MBEDTLS_DEPRECATED void mbedtls_sha256_starts( mbedtls_sha256_context *ctx,
*
* \deprecated Superseded by mbedtls_sha256_update_ret() in 2.7.0.
*
* \param ctx The SHA-256 context to initialize.
* \param input The buffer holding the data.
* \param ilen The length of the input data.
* \param ctx The SHA-256 context to use. This must be
* initialized and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_update( mbedtls_sha256_context *ctx,
const unsigned char *input,
@@ -183,8 +220,10 @@ MBEDTLS_DEPRECATED void mbedtls_sha256_update( mbedtls_sha256_context *ctx,
*
* \deprecated Superseded by mbedtls_sha256_finish_ret() in 2.7.0.
*
* \param ctx The SHA-256 context.
* \param output The SHA-224 or SHA-256 checksum result.
* \param ctx The SHA-256 context. This must be initialized and
* have a hash operation started.
* \param output The SHA-224 or SHA-256 checksum result. This must be
* a writable buffer of length \c 32 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_finish( mbedtls_sha256_context *ctx,
unsigned char output[32] );
@@ -196,8 +235,9 @@ MBEDTLS_DEPRECATED void mbedtls_sha256_finish( mbedtls_sha256_context *ctx,
*
* \deprecated Superseded by mbedtls_internal_sha256_process() in 2.7.0.
*
* \param ctx The SHA-256 context.
* \param data The buffer holding one block of data.
* \param ctx The SHA-256 context. This must be initialized.
* \param data The buffer holding one block of data. This must be
* a readable buffer of size \c 64 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256_process( mbedtls_sha256_context *ctx,
const unsigned char data[64] );
@@ -215,11 +255,13 @@ MBEDTLS_DEPRECATED void mbedtls_sha256_process( mbedtls_sha256_context *ctx,
* The SHA-256 result is calculated as
* output = SHA-256(input buffer).
*
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param output The SHA-224 or SHA-256 checksum result.
* \param is224 Determines which function to use:
* 0: Use SHA-256, or 1: Use SHA-224.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-224 or SHA-256 checksum result. This must
* be a writable buffer of length \c 32 Bytes.
* \param is224 Determines which function to use. This must be
* either \c 0 for SHA-256, or \c 1 for SHA-224.
*/
int mbedtls_sha256_ret( const unsigned char *input,
size_t ilen,
@@ -245,11 +287,13 @@ int mbedtls_sha256_ret( const unsigned char *input,
*
* \deprecated Superseded by mbedtls_sha256_ret() in 2.7.0.
*
* \param input The buffer holding the data.
* \param ilen The length of the input data.
* \param output The SHA-224 or SHA-256 checksum result.
* \param is224 Determines which function to use:
* 0: Use SHA-256, or 1: Use SHA-224.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-224 or SHA-256 checksum result. This must be
* a writable buffer of length \c 32 Bytes.
* \param is224 Determines which function to use. This must be either
* \c 0 for SHA-256, or \c 1 for SHA-224.
*/
MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input,
size_t ilen,
@@ -259,6 +303,8 @@ MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The SHA-224 and SHA-256 checkup routine.
*
@@ -267,6 +313,8 @@ MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input,
*/
int mbedtls_sha256_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif

129
externals/mbedtls/include/mbedtls/sha512.h vendored
View File

@@ -6,8 +6,31 @@
* hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,7 +46,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SHA512_H
#define MBEDTLS_SHA512_H
@@ -37,7 +60,9 @@
#include <stddef.h>
#include <stdint.h>
/* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED -0x0039 /**< SHA-512 hardware accelerator failed */
#define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA -0x0075 /**< SHA-512 input data was malformed. */
#ifdef __cplusplus
extern "C" {
@@ -54,7 +79,7 @@ extern "C" {
* checksum calculations. The choice between these two is
* made in the call to mbedtls_sha512_starts_ret().
*/
typedef struct
typedef struct mbedtls_sha512_context
{
uint64_t total[2]; /*!< The number of Bytes processed. */
uint64_t state[8]; /*!< The intermediate digest state. */
@@ -71,22 +96,26 @@ mbedtls_sha512_context;
/**
* \brief This function initializes a SHA-512 context.
*
* \param ctx The SHA-512 context to initialize.
* \param ctx The SHA-512 context to initialize. This must
* not be \c NULL.
*/
void mbedtls_sha512_init( mbedtls_sha512_context *ctx );
/**
* \brief This function clears a SHA-512 context.
*
* \param ctx The SHA-512 context to clear.
* \param ctx The SHA-512 context to clear. This may be \c NULL,
* in which case this function does nothing. If it
* is not \c NULL, it must point to an initialized
* SHA-512 context.
*/
void mbedtls_sha512_free( mbedtls_sha512_context *ctx );
/**
* \brief This function clones the state of a SHA-512 context.
*
* \param dst The destination context.
* \param src The context to clone.
* \param dst The destination context. This must be initialized.
* \param src The context to clone. This must be initialized.
*/
void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
const mbedtls_sha512_context *src );
@@ -95,11 +124,12 @@ void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
* \brief This function starts a SHA-384 or SHA-512 checksum
* calculation.
*
* \param ctx The SHA-512 context to initialize.
* \param is384 Determines which function to use:
* 0: Use SHA-512, or 1: Use SHA-384.
* \param ctx The SHA-512 context to use. This must be initialized.
* \param is384 Determines which function to use. This must be
* either \c for SHA-512, or \c 1 for SHA-384.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );
@@ -107,11 +137,14 @@ int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );
* \brief This function feeds an input buffer into an ongoing
* SHA-512 checksum calculation.
*
* \param ctx The SHA-512 context.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the input data. This must
* be a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
const unsigned char *input,
@@ -119,13 +152,15 @@ int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
/**
* \brief This function finishes the SHA-512 operation, and writes
* the result to the output buffer. This function is for
* internal use only.
* the result to the output buffer.
*
* \param ctx The SHA-512 context.
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-384 or SHA-512 checksum result.
* This must be a writable buffer of length \c 64 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
unsigned char output[64] );
@@ -133,11 +168,14 @@ int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
/**
* \brief This function processes a single data block within
* the ongoing SHA-512 computation.
* This function is for internal use only.
*
* \param ctx The SHA-512 context.
* \param data The buffer holding one block of data.
* \param ctx The SHA-512 context. This must be initialized.
* \param data The buffer holding one block of data. This
* must be a readable buffer of length \c 128 Bytes.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
const unsigned char data[128] );
@@ -153,9 +191,9 @@ int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
*
* \deprecated Superseded by mbedtls_sha512_starts_ret() in 2.7.0
*
* \param ctx The SHA-512 context to initialize.
* \param is384 Determines which function to use:
* 0: Use SHA-512, or 1: Use SHA-384.
* \param ctx The SHA-512 context to use. This must be initialized.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512 or \c 1 for SHA-384.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
int is384 );
@@ -166,9 +204,11 @@ MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
*
* \deprecated Superseded by mbedtls_sha512_update_ret() in 2.7.0.
*
* \param ctx The SHA-512 context.
* \param input The buffer holding the data.
* \param ilen The length of the input data.
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param input The buffer holding the data. This must be a readable
* buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
const unsigned char *input,
@@ -180,8 +220,10 @@ MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
*
* \deprecated Superseded by mbedtls_sha512_finish_ret() in 2.7.0.
*
* \param ctx The SHA-512 context.
* \param output The SHA-384 or SHA-512 checksum result.
* \param ctx The SHA-512 context. This must be initialized
* and have a hash operation started.
* \param output The SHA-384 or SHA-512 checksum result. This must
* be a writable buffer of size \c 64 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
unsigned char output[64] );
@@ -193,8 +235,9 @@ MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
*
* \deprecated Superseded by mbedtls_internal_sha512_process() in 2.7.0.
*
* \param ctx The SHA-512 context.
* \param data The buffer holding one block of data.
* \param ctx The SHA-512 context. This must be initialized.
* \param data The buffer holding one block of data. This must be
* a readable buffer of length \c 128 Bytes.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512_process(
mbedtls_sha512_context *ctx,
@@ -213,13 +256,16 @@ MBEDTLS_DEPRECATED void mbedtls_sha512_process(
* The SHA-512 result is calculated as
* output = SHA-512(input buffer).
*
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param input The buffer holding the input data. This must be
* a readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-384 or SHA-512 checksum result.
* \param is384 Determines which function to use:
* 0: Use SHA-512, or 1: Use SHA-384.
* This must be a writable buffer of length \c 64 Bytes.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512, or \c 1 for SHA-384.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_sha512_ret( const unsigned char *input,
size_t ilen,
@@ -232,6 +278,7 @@ int mbedtls_sha512_ret( const unsigned char *input,
#else
#define MBEDTLS_DEPRECATED
#endif
/**
* \brief This function calculates the SHA-512 or SHA-384
* checksum of a buffer.
@@ -244,11 +291,13 @@ int mbedtls_sha512_ret( const unsigned char *input,
*
* \deprecated Superseded by mbedtls_sha512_ret() in 2.7.0
*
* \param input The buffer holding the data.
* \param ilen The length of the input data.
* \param output The SHA-384 or SHA-512 checksum result.
* \param is384 Determines which function to use:
* 0: Use SHA-512, or 1: Use SHA-384.
* \param input The buffer holding the data. This must be a
* readable buffer of length \p ilen Bytes.
* \param ilen The length of the input data in Bytes.
* \param output The SHA-384 or SHA-512 checksum result. This must
* be a writable buffer of length \c 64 Bytes.
* \param is384 Determines which function to use. This must be either
* \c 0 for SHA-512, or \c 1 for SHA-384.
*/
MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
size_t ilen,
@@ -257,6 +306,9 @@ MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
#undef MBEDTLS_DEPRECATED
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The SHA-384 or SHA-512 checkup routine.
*
@@ -264,6 +316,7 @@ MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
* \return \c 1 on failure.
*/
int mbedtls_sha512_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}

435
externals/mbedtls/include/mbedtls/ssl.h vendored
View File

@@ -4,8 +4,31 @@
* \brief SSL/TLS functions.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_H
#define MBEDTLS_SSL_H
@@ -123,6 +146,9 @@
#define MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH -0x6600 /**< Couldn't set the hash for verifying CertificateVerify */
#define MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -0x6580 /**< Internal-only message signaling that further message-processing should be done */
#define MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS -0x6500 /**< The asynchronous operation is not completed yet. */
#define MBEDTLS_ERR_SSL_EARLY_MESSAGE -0x6480 /**< Internal-only message signaling that a message arrived early. */
#define MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS -0x7000 /**< A cryptographic operation is in progress. Try again later. */
#define MBEDTLS_ERR_SSL_BAD_CONFIG -0x5E80 /**< Invalid value in SSL config */
/*
* Various constants
@@ -137,6 +163,9 @@
#define MBEDTLS_SSL_TRANSPORT_DATAGRAM 1 /*!< DTLS */
#define MBEDTLS_SSL_MAX_HOST_NAME_LEN 255 /*!< Maximum host name defined in RFC 1035 */
#define MBEDTLS_SSL_MAX_ALPN_NAME_LEN 255 /*!< Maximum size in bytes of a protocol name in alpn ext., RFC 7301 */
#define MBEDTLS_SSL_MAX_ALPN_LIST_LEN 65535 /*!< Maximum size in bytes of list in alpn ext., RFC 7301 */
/* RFC 6066 section 4, see also mfl_code_to_length in ssl_tls.c
* NONE must be zero so that memset()ing structure to zero works */
@@ -244,6 +273,14 @@
#define MBEDTLS_SSL_OUT_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN
#endif
/*
* Maximum number of heap-allocated bytes for the purpose of
* DTLS handshake message reassembly and future message buffering.
*/
#if !defined(MBEDTLS_SSL_DTLS_MAX_BUFFERING)
#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768
#endif
/* \} name SECTION: Module settings */
/*
@@ -1024,14 +1061,14 @@ struct mbedtls_ssl_context
int renego_records_seen; /*!< Records since renego request, or with DTLS,
number of retransmissions of request if
renego_max_records is < 0 */
#endif
#endif /* MBEDTLS_SSL_RENEGOTIATION */
int major_ver; /*!< equal to MBEDTLS_SSL_MAJOR_VERSION_3 */
int minor_ver; /*!< either 0 (SSL3) or 1 (TLS1.0) */
#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT)
unsigned badmac_seen; /*!< records with a bad MAC received */
#endif
#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */
mbedtls_ssl_send_t *f_send; /*!< Callback for network send */
mbedtls_ssl_recv_t *f_recv; /*!< Callback for network receive */
@@ -1087,11 +1124,11 @@ struct mbedtls_ssl_context
uint16_t in_epoch; /*!< DTLS epoch for incoming records */
size_t next_record_offset; /*!< offset of the next record in datagram
(equal to in_left if none) */
#endif
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
uint64_t in_window_top; /*!< last validated record seq_num */
uint64_t in_window; /*!< bitmask for replay detection */
#endif
#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */
size_t in_hslen; /*!< current handshake message length,
including the handshake header */
@@ -1100,6 +1137,11 @@ struct mbedtls_ssl_context
int keep_current_message; /*!< drop or reuse current message
on next call to record layer? */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
uint8_t disable_datagram_packing; /*!< Disable packing multiple records
* within a single datagram. */
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/*
* Record layer (outgoing data)
*/
@@ -1114,12 +1156,18 @@ struct mbedtls_ssl_context
size_t out_msglen; /*!< record header: message length */
size_t out_left; /*!< amount of data not yet written */
unsigned char cur_out_ctr[8]; /*!< Outgoing record sequence number. */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
uint16_t mtu; /*!< path mtu, used to fragment outgoing messages */
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_ZLIB_SUPPORT)
unsigned char *compress_buf; /*!< zlib data buffer */
#endif
#endif /* MBEDTLS_ZLIB_SUPPORT */
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
signed char split_done; /*!< current record already splitted? */
#endif
#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */
/*
* PKI layer
@@ -1132,11 +1180,11 @@ struct mbedtls_ssl_context
#if defined(MBEDTLS_X509_CRT_PARSE_C)
char *hostname; /*!< expected peer CN for verification
(and SNI if available) */
#endif
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_ALPN)
const char *alpn_chosen; /*!< negotiated protocol */
#endif
#endif /* MBEDTLS_SSL_ALPN */
/*
* Information for DTLS hello verify
@@ -1144,7 +1192,7 @@ struct mbedtls_ssl_context
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
unsigned char *cli_id; /*!< transport-level ID of the client */
size_t cli_id_len; /*!< length of cli_id */
#endif
#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */
/*
* Secure renegotiation
@@ -1156,7 +1204,7 @@ struct mbedtls_ssl_context
size_t verify_data_len; /*!< length of verify data stored */
char own_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */
char peer_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */
#endif
#endif /* MBEDTLS_SSL_RENEGOTIATION */
};
#if defined(MBEDTLS_SSL_HW_RECORD_ACCEL)
@@ -1361,7 +1409,7 @@ void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf,
* \note For DTLS, you need to provide either a non-NULL
* f_recv_timeout callback, or a f_recv that doesn't block.
*
* \note See the documentations of \c mbedtls_ssl_sent_t,
* \note See the documentations of \c mbedtls_ssl_send_t,
* \c mbedtls_ssl_recv_t and \c mbedtls_ssl_recv_timeout_t for
* the conventions those callbacks must follow.
*
@@ -1376,6 +1424,52 @@ void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl,
mbedtls_ssl_recv_t *f_recv,
mbedtls_ssl_recv_timeout_t *f_recv_timeout );
#if defined(MBEDTLS_SSL_PROTO_DTLS)
/**
* \brief Set the Maximum Tranport Unit (MTU).
* Special value: 0 means unset (no limit).
* This represents the maximum size of a datagram payload
* handled by the transport layer (usually UDP) as determined
* by the network link and stack. In practice, this controls
* the maximum size datagram the DTLS layer will pass to the
* \c f_send() callback set using \c mbedtls_ssl_set_bio().
*
* \note The limit on datagram size is converted to a limit on
* record payload by subtracting the current overhead of
* encapsulation and encryption/authentication if any.
*
* \note This can be called at any point during the connection, for
* example when a Path Maximum Transfer Unit (PMTU)
* estimate becomes available from other sources,
* such as lower (or higher) protocol layers.
*
* \note This setting only controls the size of the packets we send,
* and does not restrict the size of the datagrams we're
* willing to receive. Client-side, you can request the
* server to use smaller records with \c
* mbedtls_ssl_conf_max_frag_len().
*
* \note If both a MTU and a maximum fragment length have been
* configured (or negotiated with the peer), the resulting
* lower limit on record payload (see first note) is used.
*
* \note This can only be used to decrease the maximum size
* of datagrams (hence records, see first note) sent. It
* cannot be used to increase the maximum size of records over
* the limit set by #MBEDTLS_SSL_OUT_CONTENT_LEN.
*
* \note Values lower than the current record layer expansion will
* result in an error when trying to send data.
*
* \note Using record compression together with a non-zero MTU value
* will result in an error when trying to send data.
*
* \param ssl SSL context
* \param mtu Value of the path MTU in bytes
*/
void mbedtls_ssl_set_mtu( mbedtls_ssl_context *ssl, uint16_t mtu );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/**
* \brief Set the timeout period for mbedtls_ssl_read()
* (Default: no timeout.)
@@ -1759,6 +1853,38 @@ void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limi
#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
/**
* \brief Allow or disallow packing of multiple handshake records
* within a single datagram.
*
* \param ssl The SSL context to configure.
* \param allow_packing This determines whether datagram packing may
* be used or not. A value of \c 0 means that every
* record will be sent in a separate datagram; a
* value of \c 1 means that, if space permits,
* multiple handshake messages (including CCS) belonging to
* a single flight may be packed within a single datagram.
*
* \note This is enabled by default and should only be disabled
* for test purposes, or if datagram packing causes
* interoperability issues with peers that don't support it.
*
* \note Allowing datagram packing reduces the network load since
* there's less overhead if multiple messages share the same
* datagram. Also, it increases the handshake efficiency
* since messages belonging to a single datagram will not
* be reordered in transit, and so future message buffering
* or flight retransmission (if no buffering is used) as
* means to deal with reordering are needed less frequently.
*
* \note Application records are not affected by this option and
* are currently always sent in separate datagrams.
*
*/
void mbedtls_ssl_set_datagram_packing( mbedtls_ssl_context *ssl,
unsigned allow_packing );
/**
* \brief Set retransmit timeout values for the DTLS handshake.
* (DTLS only, no effect on TLS.)
@@ -1936,7 +2062,7 @@ void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf,
* provision more than one cert/key pair (eg one ECDSA, one
* RSA with SHA-256, one RSA with SHA-1). An adequate
* certificate will be selected according to the client's
* advertised capabilities. In case mutliple certificates are
* advertised capabilities. In case multiple certificates are
* adequate, preference is given to the one set by the first
* call to this function, then second, etc.
*
@@ -1947,6 +2073,14 @@ void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf,
* whether it matches those preferences - the server can then
* decide what it wants to do with it.
*
* \note The provided \p pk_key needs to match the public key in the
* first certificate in \p own_cert, or all handshakes using
* that certificate will fail. It is your responsibility
* to ensure that; this function will not perform any check.
* You may use mbedtls_pk_check_pair() in order to perform
* this check yourself, but be aware that this function can
* be computationally expensive on some key types.
*
* \param conf SSL configuration
* \param own_cert own public certificate chain
* \param pk_key own private key
@@ -2427,13 +2561,31 @@ void mbedtls_ssl_conf_cert_req_ca_list( mbedtls_ssl_config *conf,
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/**
* \brief Set the maximum fragment length to emit and/or negotiate
* (Default: the smaller of MBEDTLS_SSL_IN_CONTENT_LEN and
* MBEDTLS_SSL_OUT_CONTENT_LEN, usually 2^14 bytes)
* \brief Set the maximum fragment length to emit and/or negotiate.
* (Typical: the smaller of #MBEDTLS_SSL_IN_CONTENT_LEN and
* #MBEDTLS_SSL_OUT_CONTENT_LEN, usually `2^14` bytes)
* (Server: set maximum fragment length to emit,
* usually negotiated by the client during handshake
* usually negotiated by the client during handshake)
* (Client: set maximum fragment length to emit *and*
* negotiate with the server during handshake)
* (Default: #MBEDTLS_SSL_MAX_FRAG_LEN_NONE)
*
* \note On the client side, the maximum fragment length extension
* *will not* be used, unless the maximum fragment length has
* been set via this function to a value different than
* #MBEDTLS_SSL_MAX_FRAG_LEN_NONE.
*
* \note This sets the maximum length for a record's payload,
* excluding record overhead that will be added to it, see
* \c mbedtls_ssl_get_record_expansion().
*
* \note With TLS, this currently only affects ApplicationData (sent
* with \c mbedtls_ssl_read()), not handshake messages.
* With DTLS, this affects both ApplicationData and handshake.
*
* \note For DTLS, it is also possible to set a limit for the total
* size of daragrams passed to the transport layer, including
* record overhead, see \c mbedtls_ssl_set_mtu().
*
* \param conf SSL configuration
* \param mfl_code Code for maximum fragment length (allowed values:
@@ -2665,13 +2817,14 @@ size_t mbedtls_ssl_get_bytes_avail( const mbedtls_ssl_context *ssl );
/**
* \brief Return the result of the certificate verification
*
* \param ssl SSL context
* \param ssl The SSL context to use.
*
* \return 0 if successful,
* -1 if result is not available (eg because the handshake was
* aborted too early), or
* a combination of BADCERT_xxx and BADCRL_xxx flags, see
* x509.h
* \return \c 0 if the certificate verification was successful.
* \return \c -1u if the result is not available. This may happen
* e.g. if the handshake aborts early, or a verification
* callback returned a fatal error.
* \return A bitwise combination of \c MBEDTLS_X509_BADCERT_XXX
* and \c MBEDTLS_X509_BADCRL_XXX failure flags; see x509.h.
*/
uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl );
@@ -2697,6 +2850,9 @@ const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl );
* \brief Return the (maximum) number of bytes added by the record
* layer: header + encryption/MAC overhead (inc. padding)
*
* \note This function is not available (always returns an error)
* when record compression is enabled.
*
* \param ssl SSL context
*
* \return Current maximum record expansion in bytes, or
@@ -2711,12 +2867,8 @@ int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl );
* This is the value negotiated with peer if any,
* or the locally configured value.
*
* \note With DTLS, \c mbedtls_ssl_write() will return an error if
* called with a larger length value.
* With TLS, \c mbedtls_ssl_write() will fragment the input if
* necessary and return the number of bytes written; it is up
* to the caller to call \c mbedtls_ssl_write() again in
* order to send the remaining bytes if any.
* \sa mbedtls_ssl_conf_max_frag_len()
* \sa mbedtls_ssl_get_max_record_payload()
*
* \param ssl SSL context
*
@@ -2725,6 +2877,34 @@ int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl );
size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
/**
* \brief Return the current maximum outgoing record payload in bytes.
* This takes into account the config.h setting \c
* MBEDTLS_SSL_OUT_CONTENT_LEN, the configured and negotiated
* max fragment length extension if used, and for DTLS the
* path MTU as configured and current record expansion.
*
* \note With DTLS, \c mbedtls_ssl_write() will return an error if
* called with a larger length value.
* With TLS, \c mbedtls_ssl_write() will fragment the input if
* necessary and return the number of bytes written; it is up
* to the caller to call \c mbedtls_ssl_write() again in
* order to send the remaining bytes if any.
*
* \note This function is not available (always returns an error)
* when record compression is enabled.
*
* \sa mbedtls_ssl_set_mtu()
* \sa mbedtls_ssl_get_max_frag_len()
* \sa mbedtls_ssl_get_record_expansion()
*
* \param ssl SSL context
*
* \return Current maximum payload for an outgoing record,
* or a negative error code.
*/
int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Return the peer certificate from the current connection
@@ -2778,35 +2958,50 @@ int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl, mbedtls_ssl_session
*
* \param ssl SSL context
*
* \return 0 if successful, or
* MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or
* MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED (see below), or
* a specific SSL error code.
* \return \c 0 if successful.
* \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE
* if the handshake is incomplete and waiting for data to
* be available for reading from or writing to the underlying
* transport - in this case you must call this function again
* when the underlying transport is ready for the operation.
* \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous
* operation is in progress (see
* mbedtls_ssl_conf_async_private_cb()) - in this case you
* must call this function again when the operation is ready.
* \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic
* operation is in progress (see mbedtls_ecp_set_max_ops()) -
* in this case you must call this function again to complete
* the handshake when you're done attending other tasks.
* \return #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED if DTLS is in use
* and the client did not demonstrate reachability yet - in
* this case you must stop using the context (see below).
* \return Another SSL error code - in this case you must stop using
* the context (see below).
*
* If this function returns MBEDTLS_ERR_SSL_WANT_READ, the
* handshake is unfinished and no further data is available
* from the underlying transport. In this case, you must call
* the function again at some later stage.
* \warning If this function returns something other than
* \c 0,
* #MBEDTLS_ERR_SSL_WANT_READ,
* #MBEDTLS_ERR_SSL_WANT_WRITE,
* #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS,
* you must stop using the SSL context for reading or writing,
* and either free it or call \c mbedtls_ssl_session_reset()
* on it before re-using it for a new connection; the current
* connection must be closed.
*
* \note If DTLS is in use, then you may choose to handle
* #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging
* purposes, as it is an expected return value rather than an
* actual error, but you still need to reset/free the context.
*
* \note Remarks regarding event-driven DTLS:
* If the function returns MBEDTLS_ERR_SSL_WANT_READ, no datagram
* If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram
* from the underlying transport layer is currently being processed,
* and it is safe to idle until the timer or the underlying transport
* signal a new event. This is not true for a successful handshake,
* in which case the datagram of the underlying transport that is
* currently being processed might or might not contain further
* DTLS records.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using
* the SSL context for reading or writing, and either free it or
* call \c mbedtls_ssl_session_reset() on it before re-using it
* for a new connection; the current connection must be closed.
*
* \note If DTLS is in use, then you may choose to handle
* MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging
* purposes, as it is an expected return value rather than an
* actual error, but you still need to reset/free the context.
*/
int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl );
@@ -2814,20 +3009,21 @@ int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl );
* \brief Perform a single step of the SSL handshake
*
* \note The state of the context (ssl->state) will be at
* the next state after execution of this function. Do not
* the next state after this function returns \c 0. Do not
* call this function if state is MBEDTLS_SSL_HANDSHAKE_OVER.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using
* the SSL context for reading or writing, and either free it or
* call \c mbedtls_ssl_session_reset() on it before re-using it
* for a new connection; the current connection must be closed.
*
* \param ssl SSL context
*
* \return 0 if successful, or
* MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or
* a specific SSL error code.
* \return See mbedtls_ssl_handshake().
*
* \warning If this function returns something other than \c 0,
* #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE,
* #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using
* the SSL context for reading or writing, and either free it
* or call \c mbedtls_ssl_session_reset() on it before
* re-using it for a new connection; the current connection
* must be closed.
*/
int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl );
@@ -2842,13 +3038,18 @@ int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl );
* \param ssl SSL context
*
* \return 0 if successful, or any mbedtls_ssl_handshake() return
* value.
* value except #MBEDTLS_ERR_SSL_CLIENT_RECONNECT that can't
* happen during a renegotiation.
*
* \warning If this function returns something other than \c 0,
* #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE,
* #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using
* the SSL context for reading or writing, and either free it
* or call \c mbedtls_ssl_session_reset() on it before
* re-using it for a new connection; the current connection
* must be closed.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using
* the SSL context for reading or writing, and either free it or
* call \c mbedtls_ssl_session_reset() on it before re-using it
* for a new connection; the current connection must be closed.
*/
int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_RENEGOTIATION */
@@ -2860,42 +3061,56 @@ int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl );
* \param buf buffer that will hold the data
* \param len maximum number of bytes to read
*
* \return One of the following:
* - 0 if the read end of the underlying transport was closed,
* - the (positive) number of bytes read, or
* - a negative error code on failure.
* \return The (positive) number of bytes read if successful.
* \return \c 0 if the read end of the underlying transport was closed
* - in this case you must stop using the context (see below).
* \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE
* if the handshake is incomplete and waiting for data to
* be available for reading from or writing to the underlying
* transport - in this case you must call this function again
* when the underlying transport is ready for the operation.
* \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous
* operation is in progress (see
* mbedtls_ssl_conf_async_private_cb()) - in this case you
* must call this function again when the operation is ready.
* \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic
* operation is in progress (see mbedtls_ecp_set_max_ops()) -
* in this case you must call this function again to complete
* the handshake when you're done attending other tasks.
* \return #MBEDTLS_ERR_SSL_CLIENT_RECONNECT if we're at the server
* side of a DTLS connection and the client is initiating a
* new connection using the same source port. See below.
* \return Another SSL error code - in this case you must stop using
* the context (see below).
*
* If MBEDTLS_ERR_SSL_WANT_READ is returned, no application data
* is available from the underlying transport. In this case,
* the function needs to be called again at some later stage.
* \warning If this function returns something other than
* a positive value,
* #MBEDTLS_ERR_SSL_WANT_READ,
* #MBEDTLS_ERR_SSL_WANT_WRITE,
* #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS,
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS or
* #MBEDTLS_ERR_SSL_CLIENT_RECONNECT,
* you must stop using the SSL context for reading or writing,
* and either free it or call \c mbedtls_ssl_session_reset()
* on it before re-using it for a new connection; the current
* connection must be closed.
*
* If MBEDTLS_ERR_SSL_WANT_WRITE is returned, a write is pending
* but the underlying transport isn't available for writing. In this
* case, the function needs to be called again at some later stage.
*
* When this function return MBEDTLS_ERR_SSL_CLIENT_RECONNECT
* \note When this function returns #MBEDTLS_ERR_SSL_CLIENT_RECONNECT
* (which can only happen server-side), it means that a client
* is initiating a new connection using the same source port.
* You can either treat that as a connection close and wait
* for the client to resend a ClientHello, or directly
* continue with \c mbedtls_ssl_handshake() with the same
* context (as it has beeen reset internally). Either way, you
* should make sure this is seen by the application as a new
* context (as it has been reset internally). Either way, you
* must make sure this is seen by the application as a new
* connection: application state, if any, should be reset, and
* most importantly the identity of the client must be checked
* again. WARNING: not validating the identity of the client
* again, or not transmitting the new identity to the
* application layer, would allow authentication bypass!
*
* \note If this function returns something other than a positive value
* or MBEDTLS_ERR_SSL_WANT_READ/WRITE or MBEDTLS_ERR_SSL_CLIENT_RECONNECT,
* you must stop using the SSL context for reading or writing,
* and either free it or call \c mbedtls_ssl_session_reset() on it
* before re-using it for a new connection; the current connection
* must be closed.
*
* \note Remarks regarding event-driven DTLS:
* - If the function returns MBEDTLS_ERR_SSL_WANT_READ, no datagram
* - If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram
* from the underlying transport layer is currently being processed,
* and it is safe to idle until the timer or the underlying transport
* signal a new event.
@@ -2924,21 +3139,39 @@ int mbedtls_ssl_read( mbedtls_ssl_context *ssl, unsigned char *buf, size_t len )
* \param buf buffer holding the data
* \param len how many bytes must be written
*
* \return the number of bytes actually written (may be less than len),
* or MBEDTLS_ERR_SSL_WANT_WRITE or MBEDTLS_ERR_SSL_WANT_READ,
* or another negative error code.
* \return The (non-negative) number of bytes actually written if
* successful (may be less than \p len).
* \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE
* if the handshake is incomplete and waiting for data to
* be available for reading from or writing to the underlying
* transport - in this case you must call this function again
* when the underlying transport is ready for the operation.
* \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous
* operation is in progress (see
* mbedtls_ssl_conf_async_private_cb()) - in this case you
* must call this function again when the operation is ready.
* \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic
* operation is in progress (see mbedtls_ecp_set_max_ops()) -
* in this case you must call this function again to complete
* the handshake when you're done attending other tasks.
* \return Another SSL error code - in this case you must stop using
* the context (see below).
*
* \note If this function returns something other than 0, a positive
* value or MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop
* using the SSL context for reading or writing, and either
* free it or call \c mbedtls_ssl_session_reset() on it before
* re-using it for a new connection; the current connection
* must be closed.
* \warning If this function returns something other than
* a non-negative value,
* #MBEDTLS_ERR_SSL_WANT_READ,
* #MBEDTLS_ERR_SSL_WANT_WRITE,
* #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS,
* you must stop using the SSL context for reading or writing,
* and either free it or call \c mbedtls_ssl_session_reset()
* on it before re-using it for a new connection; the current
* connection must be closed.
*
* \note When this function returns MBEDTLS_ERR_SSL_WANT_WRITE/READ,
* \note When this function returns #MBEDTLS_ERR_SSL_WANT_WRITE/READ,
* it must be called later with the *same* arguments,
* until it returns a value greater that or equal to 0. When
* the function returns MBEDTLS_ERR_SSL_WANT_WRITE there may be
* the function returns #MBEDTLS_ERR_SSL_WANT_WRITE there may be
* some partial data in the output buffer, however this is not
* yet sent.
*
@@ -3002,7 +3235,7 @@ void mbedtls_ssl_free( mbedtls_ssl_context *ssl );
* mbedtls_ssl_config_defaults() or mbedtls_ssl_config_free().
*
* \note You need to call mbedtls_ssl_config_defaults() unless you
* manually set all of the relevent fields yourself.
* manually set all of the relevant fields yourself.
*
* \param conf SSL configuration context
*/

35
externals/mbedtls/include/mbedtls/ssl_cache.h vendored
View File

@@ -4,8 +4,31 @@
* \brief SSL session cache implementation
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_CACHE_H
#define MBEDTLS_SSL_CACHE_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ssl.h"
#if defined(MBEDTLS_THREADING_C)

35
externals/mbedtls/include/mbedtls/ssl_ciphersuites.h vendored
View File

@@ -4,8 +4,31 @@
* \brief SSL Ciphersuites for mbed TLS
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_CIPHERSUITES_H
#define MBEDTLS_SSL_CIPHERSUITES_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "pk.h"
#include "cipher.h"
#include "md.h"

37
externals/mbedtls/include/mbedtls/ssl_cookie.h vendored
View File

@@ -4,8 +4,31 @@
* \brief DTLS cookie callbacks implementation
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_COOKIE_H
#define MBEDTLS_SSL_COOKIE_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ssl.h"
#if defined(MBEDTLS_THREADING_C)
@@ -52,7 +81,7 @@ extern "C" {
/**
* \brief Context for the default cookie functions.
*/
typedef struct
typedef struct mbedtls_ssl_cookie_ctx
{
mbedtls_md_context_t hmac_ctx; /*!< context for the HMAC portion */
#if !defined(MBEDTLS_HAVE_TIME)

235
externals/mbedtls/include/mbedtls/ssl_internal.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Internal functions shared by the SSL modules
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_INTERNAL_H
#define MBEDTLS_SSL_INTERNAL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ssl.h"
#include "cipher.h"
@@ -95,6 +124,14 @@
#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
/* Shorthand for restartable ECC */
#if defined(MBEDTLS_ECP_RESTARTABLE) && \
defined(MBEDTLS_SSL_CLI_C) && \
defined(MBEDTLS_SSL_PROTO_TLS1_2) && \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED)
#define MBEDTLS_SSL__ECP_RESTARTABLE
#endif
#define MBEDTLS_SSL_INITIAL_HANDSHAKE 0
#define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */
#define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */
@@ -113,6 +150,24 @@
#define MBEDTLS_SSL_RETRANS_WAITING 2
#define MBEDTLS_SSL_RETRANS_FINISHED 3
/* This macro determines whether CBC is supported. */
#if defined(MBEDTLS_CIPHER_MODE_CBC) && \
( defined(MBEDTLS_AES_C) || \
defined(MBEDTLS_CAMELLIA_C) || \
defined(MBEDTLS_ARIA_C) || \
defined(MBEDTLS_DES_C) )
#define MBEDTLS_SSL_SOME_SUITES_USE_CBC
#endif
/* This macro determines whether the CBC construct used in TLS 1.0-1.2 (as
* opposed to the very different CBC construct used in SSLv3) is supported. */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \
( defined(MBEDTLS_SSL_PROTO_TLS1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_2) )
#define MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC
#endif
/*
* Allow extra bytes for record, authentication and encryption overhead:
* counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256)
@@ -157,6 +212,9 @@
#define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \
( MBEDTLS_SSL_OUT_CONTENT_LEN ) )
/* The maximum number of buffered handshake messages. */
#define MBEDTLS_SSL_MAX_BUFFERED_HS 4
/* Maximum length we can advertise as our max content length for
RFC 6066 max_fragment_length extension negotiation purposes
(the lesser of both sizes, if they are unequal.)
@@ -167,6 +225,12 @@
: ( MBEDTLS_SSL_IN_CONTENT_LEN ) \
)
/* Maximum size in bytes of list in sig-hash algorithm ext., RFC 5246 */
#define MBEDTLS_SSL_MAX_SIG_HASH_ALG_LIST_LEN 65534
/* Maximum size in bytes of list in supported elliptic curve ext., RFC 4492 */
#define MBEDTLS_SSL_MAX_CURVE_LIST_LEN 65535
/*
* Check that we obey the standard's message size bounds
*/
@@ -221,6 +285,41 @@
#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0)
#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1)
/**
* \brief This function checks if the remaining size in a buffer is
* greater or equal than a needed space.
*
* \param cur Pointer to the current position in the buffer.
* \param end Pointer to one past the end of the buffer.
* \param need Needed space in bytes.
*
* \return Zero if the needed space is available in the buffer, non-zero
* otherwise.
*/
static inline int mbedtls_ssl_chk_buf_ptr( const uint8_t *cur,
const uint8_t *end, size_t need )
{
return( ( cur > end ) || ( need > (size_t)( end - cur ) ) );
}
/**
* \brief This macro checks if the remaining size in a buffer is
* greater or equal than a needed space. If it is not the case,
* it returns an SSL_BUFFER_TOO_SMALL error.
*
* \param cur Pointer to the current position in the buffer.
* \param end Pointer to one past the end of the buffer.
* \param need Needed space in bytes.
*
*/
#define MBEDTLS_SSL_CHK_BUF_PTR( cur, end, need ) \
do { \
if( mbedtls_ssl_chk_buf_ptr( ( cur ), ( end ), ( need ) ) != 0 ) \
{ \
return( MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL ); \
} \
} while( 0 )
#ifdef __cplusplus
extern "C" {
#endif
@@ -286,7 +385,18 @@ struct mbedtls_ssl_handshake_params
mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */
#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL__ECP_RESTARTABLE)
int ecrs_enabled; /*!< Handshake supports EC restart? */
mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */
enum { /* this complements ssl->state with info on intra-state operations */
ssl_ecrs_none = 0, /*!< nothing going on (yet) */
ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */
ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */
ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */
ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */
} ecrs_state; /*!< current (or last) operation */
size_t ecrs_n; /*!< place for saving a length */
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */
unsigned int in_msg_seq; /*!< Incoming handshake sequence number */
@@ -296,18 +406,45 @@ struct mbedtls_ssl_handshake_params
unsigned char verify_cookie_len; /*!< Cli: cookie length
Srv: flag for sending a cookie */
unsigned char *hs_msg; /*!< Reassembled handshake message */
uint32_t retransmit_timeout; /*!< Current value of timeout */
unsigned char retransmit_state; /*!< Retransmission state */
mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
unsigned char *cur_msg_p; /*!< Position in current message */
unsigned int in_flight_start_seq; /*!< Minimum message sequence in the
flight being received */
mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for
resending messages */
unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter
for resending messages */
struct
{
size_t total_bytes_buffered; /*!< Cumulative size of heap allocated
* buffers used for message buffering. */
uint8_t seen_ccs; /*!< Indicates if a CCS message has
* been seen in the current flight. */
struct mbedtls_ssl_hs_buffer
{
unsigned is_valid : 1;
unsigned is_fragmented : 1;
unsigned is_complete : 1;
unsigned char *data;
size_t data_len;
} hs[MBEDTLS_SSL_MAX_BUFFERED_HS];
struct
{
unsigned char *data;
size_t len;
unsigned epoch;
} future_record;
} buffering;
uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/*
@@ -366,6 +503,8 @@ struct mbedtls_ssl_handshake_params
#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */
};
typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer;
/*
* This structure contains a full set of runtime transform parameters
* either in negotiation or active.
@@ -480,7 +619,6 @@ int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl );
void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl );
int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl );
int mbedtls_ssl_read_record_layer( mbedtls_ssl_context *ssl );
int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl );
int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl );
void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl );
@@ -492,7 +630,10 @@ void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl );
* of the logic of (D)TLS from the implementation
* of the secure transport.
*
* \param ssl SSL context to use
* \param ssl The SSL context to use.
* \param update_hs_digest This indicates if the handshake digest
* should be automatically updated in case
* a handshake message is found.
*
* \return 0 or non-zero error code.
*
@@ -558,10 +699,12 @@ void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl );
* following the above definition.
*
*/
int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl,
unsigned update_hs_digest );
int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, uint8_t force_flush );
int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl );
@@ -670,6 +813,7 @@ static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl )
void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl );
#endif
/* Visible for testing purposes only */
@@ -715,6 +859,73 @@ int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl,
#endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
MBEDTLS_SSL_PROTO_TLS1_2 */
#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
/** \brief Compute the HMAC of variable-length data with constant flow.
*
* This function computes the HMAC of the concatenation of \p add_data and \p
* data, and does with a code flow and memory access pattern that does not
* depend on \p data_len_secret, but only on \p min_data_len and \p
* max_data_len. In particular, this function always reads exactly \p
* max_data_len bytes from \p data.
*
* \param ctx The HMAC context. It must have keys configured
* with mbedtls_md_hmac_starts() and use one of the
* following hashes: SHA-384, SHA-256, SHA-1 or MD-5.
* It is reset using mbedtls_md_hmac_reset() after
* the computation is complete to prepare for the
* next computation.
* \param add_data The additional data prepended to \p data. This
* must point to a readable buffer of \p add_data_len
* bytes.
* \param add_data_len The length of \p add_data in bytes.
* \param data The data appended to \p add_data. This must point
* to a readable buffer of \p max_data_len bytes.
* \param data_len_secret The length of the data to process in \p data.
* This must be no less than \p min_data_len and no
* greater than \p max_data_len.
* \param min_data_len The minimal length of \p data in bytes.
* \param max_data_len The maximal length of \p data in bytes.
* \param output The HMAC will be written here. This must point to
* a writable buffer of sufficient size to hold the
* HMAC value.
*
* \retval 0
* Success.
* \retval MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED
* The hardware accelerator failed.
*/
int mbedtls_ssl_cf_hmac(
mbedtls_md_context_t *ctx,
const unsigned char *add_data, size_t add_data_len,
const unsigned char *data, size_t data_len_secret,
size_t min_data_len, size_t max_data_len,
unsigned char *output );
/** \brief Copy data from a secret position with constant flow.
*
* This function copies \p len bytes from \p src_base + \p offset_secret to \p
* dst, with a code flow and memory access pattern that does not depend on \p
* offset_secret, but only on \p offset_min, \p offset_max and \p len.
*
* \param dst The destination buffer. This must point to a writable
* buffer of at least \p len bytes.
* \param src_base The base of the source buffer. This must point to a
* readable buffer of at least \p offset_max + \p len
* bytes.
* \param offset_secret The offset in the source buffer from which to copy.
* This must be no less than \p offset_min and no greater
* than \p offset_max.
* \param offset_min The minimal value of \p offset_secret.
* \param offset_max The maximal value of \p offset_secret.
* \param len The number of bytes to copy.
*/
void mbedtls_ssl_cf_memcpy_offset( unsigned char *dst,
const unsigned char *src_base,
size_t offset_secret,
size_t offset_min, size_t offset_max,
size_t len );
#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
#ifdef __cplusplus
}
#endif

43
externals/mbedtls/include/mbedtls/ssl_ticket.h vendored
View File

@@ -4,8 +4,31 @@
* \brief TLS server ticket callbacks implementation
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,11 +44,17 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_SSL_TICKET_H
#define MBEDTLS_SSL_TICKET_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
/*
* This implementation of the session ticket callbacks includes key
* management, rotating the keys periodically in order to preserve forward
@@ -46,7 +75,7 @@ extern "C" {
/**
* \brief Information for session ticket protection
*/
typedef struct
typedef struct mbedtls_ssl_ticket_key
{
unsigned char name[4]; /*!< random key identifier */
uint32_t generation_time; /*!< key generation timestamp (seconds) */
@@ -57,7 +86,7 @@ mbedtls_ssl_ticket_key;
/**
* \brief Context for session ticket handling functions
*/
typedef struct
typedef struct mbedtls_ssl_ticket_context
{
mbedtls_ssl_ticket_key keys[2]; /*!< ticket protection keys */
unsigned char active; /*!< index of the currently active key */
@@ -113,14 +142,14 @@ int mbedtls_ssl_ticket_setup( mbedtls_ssl_ticket_context *ctx,
/**
* \brief Implementation of the ticket write callback
*
* \note See \c mbedlts_ssl_ticket_write_t for description
* \note See \c mbedtls_ssl_ticket_write_t for description
*/
mbedtls_ssl_ticket_write_t mbedtls_ssl_ticket_write;
/**
* \brief Implementation of the ticket parse callback
*
* \note See \c mbedlts_ssl_ticket_parse_t for description
* \note See \c mbedtls_ssl_ticket_parse_t for description
*/
mbedtls_ssl_ticket_parse_t mbedtls_ssl_ticket_parse;

48
externals/mbedtls/include/mbedtls/threading.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Threading abstraction layer
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_THREADING_H
#define MBEDTLS_THREADING_H
@@ -38,15 +61,21 @@
extern "C" {
#endif
/* MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE is deprecated and should not be
* used. */
#define MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE -0x001A /**< The selected feature is not available. */
#define MBEDTLS_ERR_THREADING_BAD_INPUT_DATA -0x001C /**< Bad input parameters to function. */
#define MBEDTLS_ERR_THREADING_MUTEX_ERROR -0x001E /**< Locking / unlocking / free failed with error code. */
#if defined(MBEDTLS_THREADING_PTHREAD)
#include <pthread.h>
typedef struct
typedef struct mbedtls_threading_mutex_t
{
pthread_mutex_t mutex;
/* is_valid is 0 after a failed init or a free, and nonzero after a
* successful init. This field is not considered part of the public
* API of Mbed TLS and may change without notice. */
char is_valid;
} mbedtls_threading_mutex_t;
#endif
@@ -101,6 +130,17 @@ extern int (*mbedtls_mutex_unlock)( mbedtls_threading_mutex_t *mutex );
#if defined(MBEDTLS_FS_IO)
extern mbedtls_threading_mutex_t mbedtls_threading_readdir_mutex;
#endif
#if defined(MBEDTLS_HAVE_TIME_DATE) && !defined(MBEDTLS_PLATFORM_GMTIME_R_ALT)
/* This mutex may or may not be used in the default definition of
* mbedtls_platform_gmtime_r(), but in order to determine that,
* we need to check POSIX features, hence modify _POSIX_C_SOURCE.
* With the current approach, this declaration is orphaned, lacking
* an accompanying definition, in case mbedtls_platform_gmtime_r()
* doesn't need it, but that's not a problem. */
extern mbedtls_threading_mutex_t mbedtls_threading_gmtime_mutex;
#endif /* MBEDTLS_HAVE_TIME_DATE && !MBEDTLS_PLATFORM_GMTIME_R_ALT */
#endif /* MBEDTLS_THREADING_C */
#ifdef __cplusplus

31
externals/mbedtls/include/mbedtls/timing.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Portable interface to timeouts and to the CPU cycle counter
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_TIMING_H
#define MBEDTLS_TIMING_H
@@ -53,7 +76,7 @@ struct mbedtls_timing_hr_time
/**
* \brief Context for mbedtls_timing_set/get_delay()
*/
typedef struct
typedef struct mbedtls_timing_delay_context
{
struct mbedtls_timing_hr_time timer;
uint32_t int_ms;

39
externals/mbedtls/include/mbedtls/version.h vendored
View File

@@ -4,8 +4,31 @@
* \brief Run-time version information
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
/*
* This set of compile-time defines and run-time variables can be used to
@@ -41,17 +64,17 @@
* Major, Minor, Patchlevel
*/
#define MBEDTLS_VERSION_MAJOR 2
#define MBEDTLS_VERSION_MINOR 12
#define MBEDTLS_VERSION_PATCH 0
#define MBEDTLS_VERSION_MINOR 16
#define MBEDTLS_VERSION_PATCH 9
/**
* The single version number has the following structure:
* MMNNPP00
* Major version | Minor version | Patch version
*/
#define MBEDTLS_VERSION_NUMBER 0x020C0000
#define MBEDTLS_VERSION_STRING "2.12.0"
#define MBEDTLS_VERSION_STRING_FULL "mbed TLS 2.12.0"
#define MBEDTLS_VERSION_NUMBER 0x02100900
#define MBEDTLS_VERSION_STRING "2.16.9"
#define MBEDTLS_VERSION_STRING_FULL "mbed TLS 2.16.9"
#if defined(MBEDTLS_VERSION_C)

39
externals/mbedtls/include/mbedtls/x509.h vendored
View File

@@ -4,8 +4,31 @@
* \brief X.509 generic defines and structures
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_X509_H
#define MBEDTLS_X509_H
@@ -79,7 +102,7 @@
#define MBEDTLS_ERR_X509_ALLOC_FAILED -0x2880 /**< Allocation of memory failed. */
#define MBEDTLS_ERR_X509_FILE_IO_ERROR -0x2900 /**< Read/write of file failed. */
#define MBEDTLS_ERR_X509_BUFFER_TOO_SMALL -0x2980 /**< Destination buffer is too small. */
#define MBEDTLS_ERR_X509_FATAL_ERROR -0x3000 /**< A fatal error occured, eg the chain is too long or the vrfy callback failed. */
#define MBEDTLS_ERR_X509_FATAL_ERROR -0x3000 /**< A fatal error occurred, eg the chain is too long or the vrfy callback failed. */
/* \} name */
/**
@@ -252,7 +275,7 @@ int mbedtls_x509_serial_gets( char *buf, size_t size, const mbedtls_x509_buf *se
*
* \param to mbedtls_x509_time to check
*
* \return 1 if the given time is in the past or an error occured,
* \return 1 if the given time is in the past or an error occurred,
* 0 otherwise.
*/
int mbedtls_x509_time_is_past( const mbedtls_x509_time *to );
@@ -266,11 +289,13 @@ int mbedtls_x509_time_is_past( const mbedtls_x509_time *to );
*
* \param from mbedtls_x509_time to check
*
* \return 1 if the given time is in the future or an error occured,
* \return 1 if the given time is in the future or an error occurred,
* 0 otherwise.
*/
int mbedtls_x509_time_is_future( const mbedtls_x509_time *from );
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -278,6 +303,8 @@ int mbedtls_x509_time_is_future( const mbedtls_x509_time *from );
*/
int mbedtls_x509_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
/*
* Internal module functions. You probably do not want to use these unless you
* know you do.

33
externals/mbedtls/include/mbedtls/x509_crl.h vendored
View File

@@ -4,8 +4,31 @@
* \brief X.509 certificate revocation list parsing
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_X509_CRL_H
#define MBEDTLS_X509_CRL_H
@@ -113,7 +136,7 @@ int mbedtls_x509_crl_parse_der( mbedtls_x509_crl *chain,
/**
* \brief Parse one or more CRLs and append them to the chained list
*
* \note Mutliple CRLs are accepted only if using PEM format
* \note Multiple CRLs are accepted only if using PEM format
*
* \param chain points to the start of the chain
* \param buf buffer holding the CRL data in PEM or DER format
@@ -128,7 +151,7 @@ int mbedtls_x509_crl_parse( mbedtls_x509_crl *chain, const unsigned char *buf, s
/**
* \brief Load one or more CRLs and append them to the chained list
*
* \note Mutliple CRLs are accepted only if using PEM format
* \note Multiple CRLs are accepted only if using PEM format
*
* \param chain points to the start of the chain
* \param path filename to read the CRLs from (in PEM or DER encoding)

170
externals/mbedtls/include/mbedtls/x509_crt.h vendored
View File

@@ -4,8 +4,31 @@
* \brief X.509 certificate parsing and writing
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_X509_CRT_H
#define MBEDTLS_X509_CRT_H
@@ -100,14 +123,14 @@ mbedtls_x509_crt;
* Build flag from an algorithm/curve identifier (pk, md, ecp)
* Since 0 is always XXX_NONE, ignore it.
*/
#define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( id - 1 ) )
#define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( (id) - 1 ) )
/**
* Security profile for certificate verification.
*
* All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG().
*/
typedef struct
typedef struct mbedtls_x509_crt_profile
{
uint32_t allowed_mds; /**< MDs for signatures */
uint32_t allowed_pks; /**< PK algs for signatures */
@@ -145,6 +168,63 @@ typedef struct mbedtls_x509write_cert
}
mbedtls_x509write_cert;
/**
* Item in a verification chain: cert and flags for it
*/
typedef struct {
mbedtls_x509_crt *crt;
uint32_t flags;
} mbedtls_x509_crt_verify_chain_item;
/**
* Max size of verification chain: end-entity + intermediates + trusted root
*/
#define MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE ( MBEDTLS_X509_MAX_INTERMEDIATE_CA + 2 )
/**
* Verification chain as built by \c mbedtls_crt_verify_chain()
*/
typedef struct
{
mbedtls_x509_crt_verify_chain_item items[MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE];
unsigned len;
} mbedtls_x509_crt_verify_chain;
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Context for resuming X.509 verify operations
*/
typedef struct
{
/* for check_signature() */
mbedtls_pk_restart_ctx pk;
/* for find_parent_in() */
mbedtls_x509_crt *parent; /* non-null iff parent_in in progress */
mbedtls_x509_crt *fallback_parent;
int fallback_signature_is_good;
/* for find_parent() */
int parent_is_trusted; /* -1 if find_parent is not in progress */
/* for verify_chain() */
enum {
x509_crt_rs_none,
x509_crt_rs_find_parent,
} in_progress; /* none if no operation is in progress */
int self_cnt;
mbedtls_x509_crt_verify_chain ver_chain;
} mbedtls_x509_crt_restart_ctx;
#else /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
/* Now we can declare functions that take a pointer to that */
typedef void mbedtls_x509_crt_restart_ctx;
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* Default security profile. Should provide a good balance between security
@@ -177,19 +257,34 @@ int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain, const unsigned char *bu
size_t buflen );
/**
* \brief Parse one or more certificates and add them
* to the chained list. Parses permissively. If some
* certificates can be parsed, the result is the number
* of failed certificates it encountered. If none complete
* correctly, the first error is returned.
* \brief Parse one DER-encoded or one or more concatenated PEM-encoded
* certificates and add them to the chained list.
*
* \param chain points to the start of the chain
* \param buf buffer holding the certificate data in PEM or DER format
* \param buflen size of the buffer
* (including the terminating null byte for PEM data)
* For CRTs in PEM encoding, the function parses permissively:
* if at least one certificate can be parsed, the function
* returns the number of certificates for which parsing failed
* (hence \c 0 if all certificates were parsed successfully).
* If no certificate could be parsed, the function returns
* the first (negative) error encountered during parsing.
*
* PEM encoded certificates may be interleaved by other data
* such as human readable descriptions of their content, as
* long as the certificates are enclosed in the PEM specific
* '-----{BEGIN/END} CERTIFICATE-----' delimiters.
*
* \param chain The chain to which to add the parsed certificates.
* \param buf The buffer holding the certificate data in PEM or DER format.
* For certificates in PEM encoding, this may be a concatenation
* of multiple certificates; for DER encoding, the buffer must
* comprise exactly one certificate.
* \param buflen The size of \p buf, including the terminating \c NULL byte
* in case of PEM encoded data.
*
* \return \c 0 if all certificates were parsed successfully.
* \return The (positive) number of certificates that couldn't
* be parsed if parsing was partly successful (see above).
* \return A negative X509 or PEM error code otherwise.
*
* \return 0 if all certificates parsed successfully, a positive number
* if partly successful or a specific X509 or PEM error code
*/
int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen );
@@ -355,6 +450,37 @@ int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy );
/**
* \brief Restartable version of \c mbedtls_crt_verify_with_profile()
*
* \note Performs the same job as \c mbedtls_crt_verify_with_profile()
* but can return early and restart according to the limit
* set with \c mbedtls_ecp_set_max_ops() to reduce blocking.
*
* \param crt a certificate (chain) to be verified
* \param trust_ca the list of trusted CAs
* \param ca_crl the list of CRLs for trusted CAs
* \param profile security profile for verification
* \param cn expected Common Name (can be set to
* NULL if the CN must not be verified)
* \param flags result of the verification
* \param f_vrfy verification function
* \param p_vrfy verification parameter
* \param rs_ctx restart context (NULL to disable restart)
*
* \return See \c mbedtls_crt_verify_with_profile(), or
* \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
* operations was reached: see \c mbedtls_ecp_set_max_ops().
*/
int mbedtls_x509_crt_verify_restartable( mbedtls_x509_crt *crt,
mbedtls_x509_crt *trust_ca,
mbedtls_x509_crl *ca_crl,
const mbedtls_x509_crt_profile *profile,
const char *cn, uint32_t *flags,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy,
mbedtls_x509_crt_restart_ctx *rs_ctx );
#if defined(MBEDTLS_X509_CHECK_KEY_USAGE)
/**
* \brief Check usage of certificate against keyUsage extension.
@@ -426,6 +552,18 @@ void mbedtls_x509_crt_init( mbedtls_x509_crt *crt );
* \param crt Certificate chain to free
*/
void mbedtls_x509_crt_free( mbedtls_x509_crt *crt );
#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE)
/**
* \brief Initialize a restart context
*/
void mbedtls_x509_crt_restart_init( mbedtls_x509_crt_restart_ctx *ctx );
/**
* \brief Free the components of a restart context
*/
void mbedtls_x509_crt_restart_free( mbedtls_x509_crt_restart_ctx *ctx );
#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/* \} name */

37
externals/mbedtls/include/mbedtls/x509_csr.h vendored
View File

@@ -4,8 +4,31 @@
* \brief X.509 certificate signing request parsing and writing
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_X509_CSR_H
#define MBEDTLS_X509_CSR_H
@@ -207,6 +230,14 @@ void mbedtls_x509write_csr_set_md_alg( mbedtls_x509write_csr *ctx, mbedtls_md_ty
* \param key_usage key usage flags to set
*
* \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
*
* \note The <code>decipherOnly</code> flag from the Key Usage
* extension is represented by bit 8 (i.e.
* <code>0x8000</code>), which cannot typically be represented
* in an unsigned char. Therefore, the flag
* <code>decipherOnly</code> (i.e.
* #MBEDTLS_X509_KU_DECIPHER_ONLY) cannot be set using this
* function.
*/
int mbedtls_x509write_csr_set_key_usage( mbedtls_x509write_csr *ctx, unsigned char key_usage );

37
externals/mbedtls/include/mbedtls/xtea.h vendored
View File

@@ -4,8 +4,31 @@
* \brief XTEA block cipher (32-bit)
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: GPL-2.0
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
*
* This file is provided under the Apache License 2.0, or the
* GNU General Public License v2.0 or later.
*
* **********
* Apache License 2.0:
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* **********
*
* **********
* GNU General Public License v2.0 or later:
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,7 +44,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* **********
*/
#ifndef MBEDTLS_XTEA_H
#define MBEDTLS_XTEA_H
@@ -39,6 +62,8 @@
#define MBEDTLS_XTEA_DECRYPT 0
#define MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH -0x0028 /**< The data input has an invalid length. */
/* MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED -0x0029 /**< XTEA hardware accelerator failed. */
#ifdef __cplusplus
@@ -52,7 +77,7 @@ extern "C" {
/**
* \brief XTEA context structure
*/
typedef struct
typedef struct mbedtls_xtea_context
{
uint32_t k[4]; /*!< key */
}
@@ -121,6 +146,8 @@ int mbedtls_xtea_crypt_cbc( mbedtls_xtea_context *ctx,
unsigned char *output);
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
@@ -128,6 +155,8 @@ int mbedtls_xtea_crypt_cbc( mbedtls_xtea_context *ctx,
*/
int mbedtls_xtea_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */
#ifdef __cplusplus
}
#endif